Error message: file was skipped because the old remote file could not be deleted.. Later it will up
Error message: file was skipped because the old remote file could not be deleted.. Later it will upload after i try a few more times. Not at my size quota for website (I have lots of room) , have toggled Passive FTP ...keeps happening. Is there a way to fix this? Thanks! I am using DW CS5 on Windows 7 platform. This does not happen when I upload otherwise on my computer - only when using DW.
It also only happens with the html files - it does not happen with my jpeg files
Do you have notes in your site? DW's local and remote site synching might be off. Try clearing your cache.
http://forums.adobe.com/thread/494811
Nancy O.
Similar Messages
-
FTP help! - "skipped because the old remote file could not be deleted."
I have been using Dreamweaver to administer a dedicated
server for a large client running 6 copies of Contribute and an ASP
CMS on the same server. For some reason, out of the blue with no
changes on the server side or on my side, Dreamweaver refused to
put files (any type of file) to the server. Permissions haven't
changed on the box, all is as it was. Here's a copy of the end of
the FTP Log. The file default_new.asp that it refers to has never
existed on the server before now, but the same is happening for all
files (pre-existing or otherwise). Any help would be appreciated...
< drwxrwxrwx 1 owner group 0 May 26 2005 YPM
< -rwxrwxrwx 1 owner group 22206 May 29 16:08 ypm.html
< -rwxrwxrwx 1 owner group 1939 Sep 17 2004 YPM-home.htm
< 226 Transfer complete.
The file "default_new.asp" was skipped because the old remote
file could not be deleted.Apparently you get this because the remote disk you are
trying to write to is full. Try deleting some files on the server
and do it again. Otherwise, if it's a hosted account, contact your
host and ask them to check available disk space on your server.
This was exactly my problem. Logged on to the remote machine
using RDC and cleaned out some of the clients archive files. -
FTP problem - won't upload because no old remote file
I've used Dreamweaver for years and never run into this, but
I recently installed Dreamweaver MX on a new laptop and keep having
this problem. Sometimes - not always - when I create a new page or
introduce a new graphic on an existing page, the new item will not
upload. The error message I get is:
----The file "filename" was skipped because the old remote
file could not be deleted.---
Of course the old file can't be deleted - there isn't one.
Anyone ever run into this? Is there some setting I need to
change? Do I have to reinstall? I should add that Check-In,
Check-Out IS enabled because I have Contribute users using this
site.here's an odd possible that may or may not apply-
I use linux/apache hosts, and one of them is set up with the
standard top
level private directory, and the site files go into the
"public_html"
folder. there is also a symbolic link (alias) named "www"
that is linked to
the public_html folder.
If i put www into the host directory line of the site
definition, i could
upload files, but not overwrite or delete them. Putting the
actual folder
name instead of the symbolic link in, public_html , solved
this. -
I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location “/var/folders/lK/lKbPbq2OF0aPCbMnDc erE TI/-Tmp-”
I've also been getting others errors about cannot create or modify temporary files when trying to install other programs. Also some of my documents on my computer will not open and crash.
Any help would be helpful.
I've tried doing this as read not sure if it helps:
ls -Odel $TMPD
This is what I had in response:
drwxr-xr-x 36 root admin - 1224 Dec 9 00:29 /var/folders/lK/lKbPbq2OF0aPCbMnDc+erE+++TI/-Tmp-/Which os version are you using?
What is Lighthouse?
Please describe in detail all you have attempted to do in order to resolve the issue. -
File was Skipped because it is older than "store data
i have a mail flow central install 1.4 for a customer. when i see in the status, it show success but remark written "file was skipped because it is older than "store data for" the date". After a while, it stop pulling the logs from ironport. any idea what is going on?
This message is created in the cmt logs and sent to the customer when the log file that MFC is importing from the Ironport is older than the value set in the MFC System Administration > Configuration > 'Store Data For:' field.
Concerning why it stopped pulling logs, what is the last date of logs pulled back? When you look at that host, does it say failed or success? If it says failed, maybe the password has changed. Let me know what you see.
Also, fyi, there is a new feature that was introduced in AsyncOS 6.0 release, where it kind of brings MFC on-board the IronPort appliance.
New Feature: On-Box Message Tracking
AsyncOS 6.0 for Email includes an on-box message tracking interface that allows you to track messages that traverse your IronPort C-Series or X-Series Email Security appliance.
The message tracking feature makes it easy to find the status of messages that the Email Security appliance processes. Email administrators can quickly resolve help desk calls by determining the exact location of a message. With on-box message tracking, an administrator can determine if a particular message was delivered, found to contain a virus, or placed in a spam quarantine — or if it is located somewhere else in the mail stream.
Instead of having to search through log files using “grep” or similar tools, you can use the flexible tracking interface of the Email Security appliance to locate messages. To track messages, you create a message tracking query. You can use a variety of search parameters in combination, and you can refine tracking queries to narrow the result set.
i have a mail flow central install 1.4 for a customer. when i see in the status, it show success but remark written "file was skipped because it is older than "store data for" the date". After a while, it stop pulling the logs from ironport. any idea what is going on? -
When creating PDF I get message "This file was saved to the Temporary Internet Files Folder"
about 80% of the time when I am creating a PDF Document using the Print to Adobe function I get the following message:
"For your computers security, this file was saved to the Temporary Internet Files folder"
"Do you want to open this folder?"
It doesn't matter if I say yes I want to open the folder or not I can never locate the file.
I am using Vista Ultimate 32. for an operating system.
I have the following programs installed too:
Office 2007 Enterprise
Office 2007 Project Professional
Office Visio Professional 2007
As a antivirus I am using Trend Micro Internet Security Pro 2008
Diskeeper 2008 Pro
Nero 8
Quicken Home and Business 2008
WinRar
I am using Microsoft Internet explorer V 7.0.6001.18000
Thank you for your help. I have looked everywhere and I'm lost.You can get the same results (as turning protected mode off) by:
(presuming you have an icon for Internet Explorer on your desktop or taskbar) -- right click the icon and pick "Run as administrator"
I've got the same problem printing to pdf (Acrobat v8; problem's only in IE7) on a Dell Optiplex/Vista Business desktop machine (though not my T61/Vista Ultimate Thinkpad laptop) and the above resolves the issue for my desktop machine. Certainly not a fix but perhaps a clue to Adobe developers, on the [slim?] chance they read these posts. -
GETTING ERROR MESSAGE"You cannot login because the phone is JAL-enabled' while logging into CAD
Hello All,
One of my customer is facing problem while loging into CAD. They were getting an error message"
You cannot login because the phone is JAL-enabled.
JAL-enabled phones are not compatible with CAD".
I gone through some cisco document saying that Join across line/Direct transfer across policy option status should be set to OFF. But i dont find option in 9971 series phone.
Any Reply for this query. Highly Appreciated.That's because the JAL function is inherent to the 8961/9951/9971 phone and cannot be disabled. You'll need to upgrade to a release that supports this phone model or use a different phone.
Please remember to rate helpful responses and identify helpful or correct answers. -
error message says "an ipod has been detected but it could not be identified. We've disconnected the ipod and reconnected it but it hasn't worked.
If the iPod was originally formated to your computer, restart your computer. If not - How to use your iPod to move your music to a new computer
-
How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help
What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
http://www.adobe.com/support/connect/connecthostedsupport.html -
Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop. (Same CS5 and plug-ins installed OK several years ago on a Vista laptop. Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install. Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document." Any solution?
CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
So this means you will have make a list of the updates that failed, go here: Product updates
and manually download/install from there.
Gene -
While trying to download the 64 bit version of iTunes for a Windows 7 PC, I got the following error message: A program required for this install to complete could not be run. Any suggestions?
I would try removing and reinstall the Apple software using:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
During the restore of data using VSS Snapshots it deleted all the snapshots, this event was written in the system log :
The shadow copies of volume D: were deleted because the shadow copy storage could not grow in time. Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied.
It only restored 20 GB of data and there should be plenty of space in the Shadow copy storage
Used Shadow Copy Storage space: 2.692 GB (0%)
Allocated Shadow Copy Storage space: 5.397 GB (0%)
Maximum Shadow Copy Storage space: 694.752 GB (18%)
When there isn't enough space it should start to delete the oldest snapshots to free up additional space, but it deleted
all the snapshots. The problem is the IO but how to prevent this from happening again?Hi,
Since the shadow copy storage space doesn’t run out, the issue could be due to the Volsnap.sys driver has encountered excessive I/O activity.
You could refet to the article below to resolve the issue. This article is for Windows 2003 but it will also help on Windows 2008 R2 system.
Error message when a Windows Server 2003-based computer has a high level of I/O activity: "The shadow copies of volume Volume_Name were aborted because the diff area file could not grow in time"
http://support.microsoft.com/kb/925799
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Please help trying to restore my device but keep getting an error message Cannot be restored at this time because the iphone update server could not be contacted or is temporarily unavailable
Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
I get an error message - an I pod has been detected but it could not be identified properly this happened after I downloaded a newer version of I Tunes does anybody have a quick fix??
Hi positive29,
Welcome to the Apple Support Communities!
I understand situations like yours can be very frustrating. I would recommend the attached article to help you troubleshoot and resolve this issue.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Have a great day,
Joe -
I had changed my Apple ID on my PC and realized iCloud. On my iphone iCloud account is on the old ID. Could not find where to change it. In Settings-iTunes & App Stores – I had replaced the old ID with the new one. On my iPad 2 – iCloud account is on old ID, I cannot change it,
do i have to delete iCloud accounts and re=build them ?Yes, you got it. there is no way to change - just delete. Usually there is no loss, but photostream is reset, so make sure to back up your pictures before you do.
Maybe you are looking for
-
My iphone 5 was smashed today, basically to smitherines. The hard drive/motherboard is still intact though. Is it possible to take this to apple and have them hook it up somehow and have them put my photos on a CD or something? if apple doesn't offer
-
First off i would like to say thank you to all the Hp support people for putting up with me continueing to come back here asking the same kind of questions, Secondly i would like to appoligize that i have not explained this better and also, how long
-
What effects were used in this video?
Hello! Is anybody able to tell what sort of effects / filters were used in this video - or how to achieve something similar? http://vimeo.com/23655494 Thanks!
-
Cannot install updates for Acrobat X Pro for Mac
I have version 10.0.13. I had singed up for notification of updates but have not received any so I am now looking to download any updates past this version. I am not ready to move to XI. When I go to install and it asks to select the file I want t
-
I can't update any apps or install any new ones. I have a balance over $30.00 and it won't let me buy anything. What do I do to make it work?