Error message for easy transfer says cannot access domain account?
After installing Windows 7 onto my current computer with XP, I get the error message about unable to access account domain when files try to transfer. My computer is connected to a LAN main server but even when I log on as the account administrator the new computer with Windows 7 has the same message. What am I doing wrong? The Windows Easy Transfer software does show it is loaded on my computer as well as the main server.
Ok, lets back up a second here. So you used it to transfer data to a backup - but to where? Now you've upgraded (or dual boot) Windows 7 - have you joined it to a domain yet? 2nd, did you go to Start/All Programs/Accessories/System Tools/Windows Easy Transfer? You start it up and select Next, you mentioned network, so I'm making assumptions so its just a guess that you backed it up to a network location, however you don't select network (unless the old machine was separate and still running on the network), you'll select An external hard drive or USB flash drive, select This is my new computer, Select Yes, if the drive you backed up to is mapped (if joined to the domain and they map drives for you), then select the drive, double click it if you need to drill down into the folder where your back is and select your *mig file and go. If it isn't mapped, then you could select the computer from the network on which you data is stored and browse through it. Main server doesn't need software loaded, Windows 7 will take care of it in this scenario.MCSE, MCSA, MCDST
[If this post helps to resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.]
Similar Messages
-
Unable to play some movies from Netflix on my iPad. When I click on a movie an error message comes up "Cannot play movie. Please try again later." I contacted Netflix but have not been able the help so I am wondering if it's my iPad. I didn't have a problem before but I have recently upgraded to iOS 7.1. Also is a certain amount of storage needed to play a movie? About how much is that?
Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck! -
I was online when a mcaffee alert came up saying that real time scanning was turned off. After prompting it to turn back on it did but only for a short time. Shortly after that Firefox shut down. Now when clicking on the shortcut and the firefox emblem in the start menu the aforementioned error message comes up. Now certain programs are firewalled.
Any suggestions please?
-
I changed my AppleID password and now my iPad2 is locked with a message... "iCloud Backup is unable to access the account. Review your account information in Settings." It will not allow me to unlock the device or go to settings or ignore the message. Suggestions?
<Email Edited by Host>I have the exact same problem. I have since gone into iCloud via my PC to reset my iCloud password, but did not help. Can someone pls help!!!!!!!!!!!
-
My account is currently disabled for some reason and I don't know why or how to fix it, please help. Thank you
If changing your password does ot solve it, then contact itunes support.
-
Trying to set up Dreamweaver, PhotoShop & Illustrator for free trial and it won't let me past a page that says I am running an operating system that Dreamweaver no longer supports. What are my options?
upgrade your os. if your using os x 10.6.8, Apple - Upgrade your Mac to OS X Mavericks.
-
My ipad has frozen with a sign which says cannot access icloud account, can either press ignore or settings and whichever I press it wont let me. It has frozen it and wont even let me close down or go onto anything else...
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons
-
Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation. How to solve this?
Hello FranBNYC
It sounds like a permissions issue with your library, check out the article below to check and make sure that things are set correctly.
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Im trying to import a large amount of pictures to Iphoto. I have pleanty of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?
I. I want to import 58.64 GB of Photos from an external HD
2. I have 278.28 GB space left on my HD
3. The exact error message goes like this......
Insufficient Disk Space
iPhoto cannot import your photos because
there is not enough free space on the
volume containing your iPhoto library
I Have researched this and most advice is to empty the iPhoto trash. I have already done this and it did not help.
Thank you for helping -
After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thankszepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
trying to add Itunes match, and am almost at the end of installation when an error message pops up. it says error 4010 cannot connect to ittunes store at this time try again later. what is the problem?
Contact Apple support for warranty service.
-
Cannot put episodes of American Horror Story onto my Iphone 4s! When I try to sync Tv shows an error message pops up and says these videos cannot be played on this iphone.
Hey dylanburks12,
It sounds like you are seeing issues when attempting to sync videos to your iPod. I have an article that will help explain some possible situations regarding this issue:
iTunes: Videos may be unable to sync to iPhone, iPad, or iPod - Apple Support
http://support.apple.com/en-us/ts1497
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud option in Acrobat. Kindly help me to sortout this problems?
So I tried generating the same PDFs on two other computers that have Acrobat 9 Pro. Results were reproduced. The verdict is:
- complex PDF files (that is, containing cross-references, tables of contents, and bookmarks) generated by Acrobat 9.x Pro are roughly 2-5x larger than the identical file generated with Acrobat 8.x Pro.
- different PDF conversion settings make a negligable difference (less than 10% rather than 70-80%).
- using the "Reduce File Size" or "Optimize PDF" option cuts the file size roughly in half, almost always resulting in a "image downsampling mask" warning message, which requires acknowledgement (that is a problem for batch processing or automation).
- adding an Acrobat watermark to the file cuts the file size roughly in half.
- just using Save As to another filename has no effect on file size.
- generating the PDF in Acrobat 9 with links but no PDF bookmarks still results in the inflated file size.
- generating the PDF in Acrobat 9 without any links or bookmarks results in approximately the same file size as the Acrobat 8 PDF with full links and bookmarks.
It appears that Acrobat 9's manner of adding links is what's bloating the files, and in my case it's probably not related to images or image resolution/print quality. It's a shame, because Acrobat 9 seems to have made some improvements to the Review Tracker interface, and a few other bells and whistles which I haven't really gotten around to exporing yet. But unless I find a way to keep my links and the PDF file sizes comparable to what I was getting with Acrobat 8 Pro, it looks like I'm going to stay with Acrobat 8. -
Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?
Hello,
Did you reinstall lately?
My 10.4.11 Drive seemes to have iTunes 7.6.2 on it, have you tried Software update to see if iTunes is listed?
Another 10.4.11 drive has iTunes 6.05 on it... I hate upgrading iTunes, seems worse at every upgrade.
The 10.5.8 drive I'm booted from now has iTunes 8.02 on it. -
i copied 11 out of 12 discs to itunes, but the 12th has an error message
i do not have write access for itunes media folder or a folder within itQuit iTunes.
Go to My Music folder.
Select the iTunes folder, right click > Properties.
Click the Security tab and make sure you have full Read/Write privileges.
Maybe you are looking for
-
Audio doesn't work with Kanex iadapt 51 mini-displayport to HDMI adapter
i am trying to connect my 2009 macbook pro to my HDTV using this adapter: http://kanexlive.com/products/item-id-3495.html which routes the audio from the headphone jack through the HDMI cable. i need to do this since the 2009 macbook pro doesn't supp
-
I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, w
-
ITunes error messages while syncing after 0SX 10.6.6 update
After installing the recent OSX 10.6.6 update, I am receiving the following error messages in iTunes when trying to sync both my iPhone 4 and my 1st generation Apple TV: iPhone error message: "The iPhone cannot be synced. The disk could not be read f
-
hi, what is the maximum size for a character parameter. I set a user parameter size to 64000 and compiling works. But when I run the report, it works only for strings having size less than about 32700. Is it possible to pass a report a CLOB parameter
-
CONNECTING MY WIRELESS PRINTER WITH TIME CAPSULE
Cant seem to get it to link up, any suggestions.?