Error message for iPhoto
I am receiving a message "You can't open your current photo library using this version of iPhoto." When I try to open iPhoto. It continues to say, "You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto." I did not make any changes to my knowledge, and I tried to download a newer version but it didn't work. Could anybody help me? Thank you, PATTY
Welcome to the Apple Discussions. What version of iPhoto are you running and what updater did you try to run on it?
Try the three fixes below in order as needed:
1 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
2 - rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos.
3 - start over with a new library and import the Originals folder from your original library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open Photo window
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.
Similar Messages
-
How to create a error message for Deleted batch while creating a PO
Hi ,
Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
when a PO is created for a deleted batch at GI &GR lebel it is showing a error message,
but i want to show a error message while doing the PO creation.
Thanks,
Sachhiin badi me_process_po_cust u can put this message
METHOD if_ex_me_process_po_cust~check. -
For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?
Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards. -
Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
SukumarHello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß -
How to give error message for the screen element text field when wrong i/p
How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar ShuklaHi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla, -
Error Message For BISystemUser: User not authenticated
We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
nqserver.log:
...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
In oracle support we found such issue (Doc ID 1308389.1):
OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
Getting error: Unable to Sign in. invalid username or password was entered
Changes: Changed repository, deleted BISystemuser, added the user back
Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
It seem to be funny for PROD environment. How we cam resolve this problem?Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
If that's the case you need to change the bisystemuser password to something known and update the credential store password.
Another possibility might just be that you need to regenerate the GUIDs:
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721 -
Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5
imac 2.66 Ghz, Intel Core i5, OS 10.6.4.
Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5:
Adobe Air
the installation of this app is damaged. Try re-installing or contacting the publisher for assistance.
Tried several times to uninstall and reinstall from fresh download to no avail.
I'm finding the instructions in the trouble shooting area a tad esoteric.
Will there be an update to the installer released soon?Hi,
I'm assuming your having troubles installing the 2.0.3 runtime? If so, can you please try the instructions in this post?
Thanks,
Chris -
Error message for Unable to connect (BIB-16633)
Dear All
I use Oracle Jdeveloper10g (win32), Oracle database10g or 9i (win32 ver). But Failure to connect to OLAP service.
Can anyone give me what is the error message for BIB-16633.
Would be really grateful if you could give me a solution as soon as possible.
Thanks & Regards,
Mr.Tsang. Hong KongFor database versions you need to have at least 9206 for 9i and 10.1.0.4 for 10g. This requires you to apply the 9206 patchset to 9i and the 10.1.0.4 patchset to the 10g base install.
Please note there are a lot of steps invloved in the patching process and you must make sure you have completed all the steps before creating your OLAP schema. Most problems occur because the patching process is incomplete and the OLAP option is in an invalid state.
You can check the state of the OLAP option using the following commands in SQLPlus:
column comp_name format a35
SELECT comp_name, status, substr(version,1,10) as version
from dba_server_registry order by modified;
Once the OLAP option is in a valid state, then you must ensure the OLAPSYS account is unlocked. To test the OLAP environment you can install the BI10G sample schema which will create a new user account called CS_OLAP which contains an Analytic Workspace.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation -
Error Message for the cancellation of paid billing document
Hi,
Can i create and error message for the cancellation of paid billing document? If yes, how can i create such.
Overview:
Accounting document is created upon creation of billing document. Upon payment, document cleared is the accounting document created. There are instances wherein accounting document was already cleared but our user is still able to reversed billing document. Now, i want to create an error message or user exist wherein, when a user will not be able to reverse the billing document if the accounting document attached to this billing document is already paid.
Thank you and best regards.
RachelleHi Rachel,
You can make use of the exit (Include) MV45AFZZ. The corresponding form routine is FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
In this exit, For the given billing document ( which is going to be cancelled ), pick up the accouting document from BSEG tables.
For this accouting document, Pass this to BSAD Table ( Customer clleared items)
If BSEG-BELNR = BSAD-BELNR and
BSEG-Acc.Year = BSAD-Acc,year )..
Then throw a error message and EXIT.
So for all the cleared docments , user can not cancel the invoices.
Regards,
Sai -
Error Message-- For Balancing field "Profit Center" is not filled
Hi All,
When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
A PGI for the DNXXXXXXXX is not possible!
Can u please help me how to resolve this issue ?
WM BabyHi,
AS per configuration , there is prifit centre assignment .Enter the profit centre in the field of profit centre by the help opf F4.
Regards,
Andra -
Error message for Confirmation
Hi,
We have a error message for back end service entry creation in the Application monitor for Confirmations.
There is no outbound or Inbound Idoc found with error.
From this error message how can we found the PO Number or Confirmation number to check whether the confirmation is posted or not?
Thannks
JimmiHi,
If you are doing confirmation in SRM , it is Extended classic scenario.
error : There is no outbound or Inbound Idoc found with error
You have not created the IDoc for the outbound Idoc for the confirmation to take to the backend.
Create the Message type and partner profile in WE20
Create Distribution model in SRM -T.code :BD 64
we found the PO Number or Confirmation number to check whether the confirmation is posted or not
Soln: Check in confirmation in display/process confirmation in SRM enter the timeframe
(or) check in R/3 in ME23N by putting the Purchase order no and check the goods receipt
Regards
Ganesh Kumar.G. -
Error message for running stored procedure
Hello expert,
I got error message for a stored procedure running as follows, will you please tell me what that error is? what is the reason for that error? appreciate very much.
Job name=PROD DWH REPORT MART LOAD.1
Job owner=DEVTEAM
Job type=SQL Script
Job status=Error
Occurred At=Aug 9, 2011 5:26:29 AM EDT
Target Name=proddw(Database Instance)
Job output=
Command:Output Log
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Aug 9 03:00:07 2011
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
SQL> SQL> SQL> SQL> Connected.
SQL> SQL> SQL> SQL> SQL> SQL>
TO_CHAR(SYSDATE,'DD-
09-aug-2011 03:00:07
SQL> SQL>
Many Thanks,What error? I can't see an error.
-
good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiting
Disable ALL security software (firewall, antivirus/spyware, etc.) running on your PC while updating.
-
Revision: 3722
Author: [email protected]
Date: 2008-10-17 14:04:59 -0700 (Fri, 17 Oct 2008)
Log Message:
Bug: BLZ-260 - Error message for a legacy <=3.0 client poll failing against a >=3.1 server is unclear
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-260
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
blazeds/trunk/modules/core/src/flex/messaging/FlexSession.java
blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.javayour problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more) -
Itunessetup.exe couldn't be downloaded error message for for vista.
itunessetup.exe couldn't be downloaded error message for for vista. Couldn't get the update so I uninstalled itunes and still get the error message. I tried reconfiguring the start up components with no luck. anybody know how to fix this?
I actually had started on this before your post but you are right. My luck created some issues but after I got around that it worked. I uninstalled everything in the order it needed to. While I was doing this windows had an update. When I restarted something must have went wrong with the update and it crashed on the start up. took me a while to restore it but when I was done it brought back the programs in their damaged state.
So I did the uninstall process again. restarted. and reinstalled and it all works now.
Thank you for the help.
For those reading this the order to uninstall goes as:
iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support, iCloud, and finally MobileMe. Skip over any you don't have installed. Then Restart then reinstall itunes.
Maybe you are looking for
-
How to delete items from the list of "auto-open" tabs that load whenever FF4 opens?
When I recently downloaded FF4, I was asked if I'd like to have FF automatically open the same tabs as were set in my IE. Great! Worked perfectly until I set those tabs as App Tabs. Now both the App Tabs and the original IE set of tabs open whenever
-
Need help - install OBIEE in Linux box
i need a document for OBIEE 11gr1 installation document i already downloaded the document from oracle website ...i need except that any useful blogs links and URL to install OBIEE 11R1 in Linux box(OEL4U5)
-
Changing the highlight color of a JMenuBar
I'm trying to change the highlight color of a JMenuBar. I�m using the METAL lookandfeel which by default highlights with a purple color. I would also like to know how its done on a JTable, I assume it is quite similar.
-
How do turn listen to my book that is on my IPad
How do I listen to my books on my IPad
-
My Deakjet 1660 printer makes a very loud clunking noise . Any ideas ?
my Deskjet 1660 printer makes a very loud clunking noise whilst trying to grab the paper. Any ideas ? A visual inspection does not show antthing obviously wrong. The paper and position are ok. thanks for any other ideas. My wife is about to throw it