Error message for itunes update fail!!!

I like everyone else was getting the MSVCR80.dll missing, windows error 7 when I tried to update itunes.  I removed all Apple programs and rebooted PC.  Now when I attempt to install I get Windows error 2 message!  It should not be this hard to update itunes!!!!  All my Window 7 updates have been installed.

Now when I attempt to install I get Windows error 2 message!
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Similar Messages

  • Error message for iTunes update. "The operation was cancelled.(3072)" What can I do?

    I get an error message:

    Quit iTunes and Xcode in all logged in users, and log out all other users — all users except the user performing the install.

  • How to fix error message "the iTunes update server could not be contatced"

    What is the cause of error message
    "The iTunes update server could not be contacted. Please check your internet connection or try again"
    I have set SSL 3.0 to on
    used the itunes diagnostic to check internet connection and the reoprt is
    Network connectivity
         Network interfaces verified OK
    ITunes Store connectivity
         Internet connectionverified OK
         Secure link to iTunes store failed  Red dot= NOT OK
    deleted the SC file in SC info directory  no success.
    Any Suggestions
    searchin for an answer

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • HT1338 I am getting an error message for the Update store, saying "To Update this application, sign in to the account you used to purchase it."

    I am getting an error message for the Update store, saying "To Update this application, sign in to the account you used to purchase it."  how do I get rid of these Old unneccisary Updates?  anyone?

    Welcome to Apple Communities
    What's this app? You need to use another Apple ID to update it

  • Error Messages for iTunes and Quicktime, what do I do?

    Hello, I'm in need of some help.
    Let me walk you all through what I did for the last 4 hours:
    (important note: I suck at far too much computer stuff, so I am fully aware that as you read the following, at certain points I probably made the problem much worse than it needed to be, I am not proud of this, but everything you read did happen, stupid as it probably was for me to pursue the problems in the particular way that I did. Hindsight is 20/20.)
    I updated my iTunes v7.7 to v8.0 today, and after trying it out for a while decided that I didn't like it and wanted to go back to what I was using before.
    So, because I didn't know what else to do, I tried to re-install the original iTunes software that came with my iPod (a 20gig classic I bought in 2004). That version of iTunes was v6.0 (again, 3 years ago).
    Part way through the installation process, I got a message that said that, because I had a newer version of iTunes on the computer already, it wouldn't install the version on the disk.
    So I uninstalled v8.0, restarted my computer, and installed the v6.0 from the CD-ROM I had.
    It was then that I found I had NONE of the 6000+ songs in my iTunes window. I checked my computers files to find that they were still in the library, but my iTunes screen was completely devoid of all my music.
    So I tried to get it all back on the player. I discovered that by right-clicking "Play" for the individual files from the folders in my iTunes that they would come up on the player, but that meant that I'd be clicking in 6000+ songs, one by one, till they were all back. I didn't want to do that.
    So I tried a system restore (again, read "important note" at top of post). After that happened and I was looking at my desktop again, tried opening iTunes, and it gave me a message that said:
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    And it asks if I wanna send an error report. I decline, then try opening Quicktime. Same message. So I try to uninstall both programs (i know, i know, "important note"), and iTunes uninstalls, Quicktime does not, because, as my computer puts it, "a fatal error occurs."
    But since I have iTunes uninstalled, I go to apples site and download iTunes v8.0 again. After waiting for all that to get done, I get the same error message.
    So I peruse this very discussion forum, and after looking for a good while at what is being recommended I go to a site and download v7.7 again.
    Again, I get the same error message.
    So here I am. I've tried working it out myself for the last 4 hours, and I seem to have made things worse.
    So please, please, PLEASE, I ask for any help you can provide.
    Can I get my iTunes back?
    Is my Quicktime corrupted now?
    Am I totally screwed?

    I had the same problem when I went to upgrade to 8 and then downgrade back to 7.7. To fix this is a little involved, but you can do it. Let me put it this way, I talked my mother through it on the phone, and she has a hard time finding the power button So no worries, I'll help you get back up and running. I am running Vista now, so I am going off of memory for Vista, so bear with me.
    I would do the following:
    1. Uninstall both iTunes and Quicktime by going to Control Panel-Add Remove Programs, and choosing first Quicktime then iTunes.
    2. Clean your registry. Easy now, it is not that hard. To do it, go to http://www.ccleaner.com/download and download CCleaner. It is free and has NO spyware. Install it and run the registry cleaner. It will remove any trace of both programs from the registry. Now you have 2 choices.
    3a. Now I would install iTunes 8. Because you already installed it once, it converted its database file that it uses to track the library and play lists up to the iTunes 8 standard.
    3b. If you have no problem loosing your playlists and library settings, you can go back to iTunes 7.7. To do this, first search for "itunes.ttl". To do this, go to Start-Search Files and Folders- and type in "iTunes.ttl" Once the search finishes, it will tell you where it is located. Navigate there using Windows Explorer or My Computer and delete it. Now you can install iTunes 7.7 with out any errors. You will not loose any files! just your playlists and it will not remember what is in your library.
    As far as adding your songs again, did you try to re-importing your music? If you go to the file menu-add folder to library. It will bring up a dialogue box that will allow you to browse to the folder with your music.
    Let me know if this works. I will help in anyway I can.
    Good Luck,
    linesma

  • Error message for itunes version 9

    I can expect quite a few people have had problems with the new version of itunes, but I wonder if anybody has any other suggestions than I have already tried. I keep getting an error message come up every single time I insert a cd into the drive so that I can import music. Windows comes up with the error message and says it has to close the program. I have tried a lot to get rid of this problem, but I feel I have run out of ideas. Ive not only tried to repair and replace any damaged files, but I have uninstalled and re-installed itunes as well as any apple software, bonjour, quicktime, safari etc. Nothing seems to be working. Plus my library seems to have dropped by about 1000 songs as well which im not happy about. Ive also tried to get itunes version 8 reinstalled but unfortunately have found that as soon as i have upgraded, itunes version 9 changes certain files within your library and therefore will not downgrade back to version 8. Can anybody please help or are us people who wont pay the fortune for helpgonna have to wait for Apple to pull there finger out in their own time? Seriously this is like when windows brought out Vista. Who realistically offers a new version when there are so many problems with it?

    You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

  • Help - error message after iTunes update

    I have a Windows 7 PC
    I updated iTunes about four days ago and got an error message.
    What should I do to correct this annoying issue?
    AppleSyncNotifier.exe - Entry Point Not Found
    The Procedure entry point xmlTextTeaderName could not be located in the dynamic link library libxml2.dll

    Many thanks.
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Error Message with iTunes update

    Since updating to the latest version of iTunes, I'm getting an error message that doesn't make sense.
    This is the message:
    "Some of the iTunes Store files in the iTunes library were not copied to the iPod because
    the iPod may only contain content from five iTunes Store accounts."
    1. I don't sync any music, I put it on manually
    2. I only have 4 iTunes Store accounts, not 5.
    3. It only happens when syncing podcasts. But when I check all podcasts are synced properly.
    Has anyone else seen this?

    It is also happening with newer content from the iTunes Store. Any thoughts out there?

  • Error message for itunes 11

    I am trying to install the new version of itunes 11 I keep getting this error message.  I tried uninstalling all of the apple products from my computer and that didnt work. An error occured during installation of assembly Microsoft.VC80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b9 a1e18e3b",processorArchitecture="amd64" HRRESULT:0x8007054F What do I do?

    Hi there,
    I would recommend taking a look at some of the general troubleshooting steps found in the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W.

  • Error message for Adobe update helper

    Since upgrading to Lion, I get the following message:
    You can't open the application Adobe Reader Updater Helper because PowerPC applications are no longer supported.
    I migrated from a PPC Imac to an Intel based i5 in February. But, this error just started after Lion upgrade. How do I stop it from continuing to pop up? Help!

    I need to finish the last post.  I also migrated a PPC G4 Powerbook running 10.5.8 to a new MBP running 10.7, and got the same Adobe Reader updater helper message mentioned at the beginning of the thread.  I did the Adobe Reader install, with no change on the error message, and couldn't find the item to either disable or delete.  Any way to get rid of this bogus error?

  • Need a BADI for raising error messages for equi update (IE02)

    Hi,
    we are trying to raise few error messages while creating equipments through BADI's (Processing through IE02 and BAPI's).
    No BADI's are supporting for raising error messages.
    SAP doesnt support processing of userexits through BAPI's (refer note 564467).
    we actually need to implement these checks and should available for all the below processes:
    Through IE02
    while doing through BAPI's
    While Executing MASS CHANGE functionality (IE05)
    Please suggest any other solution to achieve all the three at one go instead of creating some enhancements for every thing.
    thanks.

    Hi,
    Try and search for a BADI....for transaction I102...take the package name and go to SE18 and see if BADI's are available...
    Alternatively search for key CL_EXITHANDLER or get BADI in the main program of IE02..
    if you are using SAP ECC6.0 then implicit or explicit enhancements will be available... Utilize them to meet your requirement...
    Thanks

  • Error message for Itunes

    Every time my computer starts up I get the following error message. APPLE SYNC NOTIFIER,EXE,_ENTRY POINT NOT FOUND. THE PROCEDURE ENTRY POINT SQLITE3_WOL_ CHECKPOINT COULD NOT BE LOCATED IN THE DYNAMIC LINK LIBRARY.
    cAN SOMEONE TELL ME HOW TO FIX?
    I have uninstalled and reinstalled intunes but the error message continues. IN ADDITION I CANNOT SYNC MY IPOD TOUCH.
    Help

    See this previous post.  It was listed on the right hand side of this page and has a green checkmark which indicates that it was solved:
    I see a AppleSyncNotifier.exe - Entry Point Not Found error when my PC starts.

  • Error message: The iTunes update server could not be contacted...

    Windows PC, no issue with internet connection. Had issue for 3 days out of blue. Can access iTunes store itself. Run various tests/changes (hosts/proxies/protection software) suggested on support pages, with no result. Any help welcomed.
    Diagnostics as follows:
      Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Acer Aspire M5802/M3802
    iTunes 10.0.0.68
    QuickTime 7.6.8
    FairPlay 1.9.16
    Apple Application Support 2.3.4
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.49.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.7.1.420
    Gracenote MusicID 1.7.1.78
    Gracenote Submit 1.7.1.106
    iTunes Serial Number 9990E5CAAAFA4D8D
    Current user is not an administrator.
    The current local date and time is 2013-08-29 08:18:33.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 220
    Intel Corporation, Intel(R) G45/G43 Express Chipset
    Intel Corporation, Intel(R) G45/G43 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.0.0.68 is currently running.
    iTunesHelper 10.0.0.68 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name: {47DEC9D3-3FB8-4D13-AA5F-617E13CCF328}
    Description: Microsoft Virtual WiFi Miniport Adapter #3
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name: {8F8CA7DC-2803-4EBE-BE86-F808319BF092}
    Description: Belkin Play Wireless USB Adapter
    IP Address: 192.168.1.70
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.254
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.254
    Lease Obtained: Thu Aug 29 07:51:06 2013
    Lease Expires: Fri Aug 30 07:51:06 2013
    DNS Servers: 192.168.1.254
    Adapter Name: {65E0ABF5-1B1A-4D87-99F6-4FE1701263D6}
    Description: Intel(R) 82567V-2 Gigabit Network Connection
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    An unknown error occurred (-9808).
    Last successful store access was 2013-08-29 08:18:16.

    Hello tandt1970,
    Thank you for using Apple Support Communities!
    It sounds like for some reason the Update server and the computer can no longer communicate.
    I was researching what might be causing the issue and found this article:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    Windows Vista and Windows 7
    From the Start menu, choose Control Panel.
    Select Network and Internet and select Internet Options. Or in Classic View, open the Internet Optionscontrol panel.
    Click the Connections tab.
    Click the LAN Settings button.
    Select the "Automatically detect settings" checkbox.
    Click OK in both windows.
    Reopen iTunes and connect your iPhone, iPad, or iPod.
    Update or restore your device.
    Additional Information
    The “hosts” file may also be blocking gs.apple.com.
    Select the hosts file (normally you can find your hosts file at C:\WINDOWS\SYSTEM32\DRIVERS\ETC).
    Click the Edit menu, and choose Copy.
    Then, click the Edit menu again, and choose Paste. There should now be a duplicate of the hosts file named "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7).
    Drag the original hosts file to your desktop. If Windows needs your permission to continue, click Continue.
    Drag the "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7) to the desktop.
    Right-click "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7) and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
    When Notepad opens, click the Edit menu and choose Select All. Then from the Edit menu, choose Delete.
    From the File menu, choose Save. Close Notepad.
    Drag the "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7) file from your desktop back into the original location. If Windows needs your permission to continue, click Continue.
    Right-click the  "Copy of hosts" (Windows XP) or "hosts -Copy" (Windows Vista/7) file, and choose Rename. Type "hosts" (without quotation marks) and press Enter.
    Restart your computer and try connecting to the software update server.
    If the above steps do not resolve the issue, then the cause is likely out-of-date or incorrectly configured security software. Follow the steps in iTunes for Windows: Troubleshooting security software issues to resolve the issue.
    All the very best,
    Sterling

  • Error message for iTunes radio

    Two days ago I got this message when I tried to listen to the radio through iTunes. "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later." My internet connection is fine. It still won't connect. No Norton's either.

    After further listening, it can occur randomly, after commercials or songs. Always between songs/commercials though. I called iTunes support. It was tough to pinpoint the cause. After I got off the phone I decided to create a new user account on one of the computers (not a new iTunes account but a new computer user). When logged into this fresh account iTunes radio has been playing for the past two days with no issues, no interruptions. So its looking like a problem on the user account side. I am going to rebuild / reinstall iTunes from scratch on my regular user account and hopefull this will solve the problem. I'll post back here with results. Possibly this weekend.

  • HT4623 I am trying to update my iPhone 5 and keep getting an error message saying the update failed.

    I went to my iTunes on my computer to update it that way and iTunes does not show the new update.

    The servers are getting slammed by millions of people wanting to upgrade..   just give it some time, and soon enough you'll have your upgrade.

Maybe you are looking for

  • How can I delete photos from camera roll but not from another album??

    When I create a new album and copy some pictures from the camera roll to the new album, they stay on the camera roll, and when I delete one of the copied ones from camera roll it also gets deleted from the new album, how can I avoid this???

  • Music on iPhone not playing. But screen indicates it is. Why?

    I've been listening to music on my iPhone while sitting and working and while in the car. After a few songs, the audio stops, but the screen indicates the music is still playing. While having the iPhone just playing music next to me, I noticed the pl

  • Sort key issue

    I have defined a customized sort key (OB16) to populate the assignment field (ZUONR) with the reference key value (AWKEY) in the header of the accounting document. This assignment field should populate with the SD invoice document number (with is in

  • How to creat background user.

    How to creat background unser in BW? I inputed transaction code: SBIW ,and SPRO.But I haven't found 'Creat Background users for link to SAP'.How to creat this user? thanks.

  • Upload with Windows 7 - 64 bits

    I have Windows 7- 64 bits. I use Dreamweaver CS3 but the Dutch edition. So I don't always know the exact names of the instructions in English. The problem is the upload function of Dreamweaver does 'n work. I have managed the site. I upload normal fr