Error Message for OS X 10.7.5 software update

I tried software update for OSX 10.7.5 and it goes through the entire process until the end where it says update can't be installed. An unexcited error occurred.  There are Digital Cameral RAW Compatibility,  ITUNES,J AVA, HP Printer Software UPdate.  I tried all four to just the HP.  Neither is updating.  And now I can't print.  Have noticed my iMac seems to be sluggish and constantly running in the background.  Which stops the computer and backs it up until the "running" ceases.  Please help.

Boot into recovery mode and reinstall the OS, then try Software Update again.

Similar Messages

  • Error S7211 for e-mail set up after software update on Centro

    After downloading Palm software 1.07 on my Centro (Sprint), I am unable to set up my MSN Hotmail account. When I enter my login/password the error message S7211 can't connect appears. I had no problem setting up Versamail for my other accounts.
    Post relates to: Centro (Sprint)

    Just to update with my phone. I checked my Hotmail account to make sure it was allowing access from my phone. My Centro kept resetting and looping. So I tried a system reset and went to delete the application Sprint Mobile Email. I then sync to my computer,did a hard reset and downloaded Mobile Email app.
    Connection to the server was successful with no errors. I then resynced with computer to restore all data and checked email with no error. Everything is operating normally as before.
    Post relates to: Centro (Sprint)

  • Error message: cannot remove older versions of apple software update

    I recently got a 30 gb ipod, and i cant install itunes 7. I originally tried installing it at first, and it said cannot remove older applications of Apple Software Update. So i installed itunes 4 to put music on my ipod. Then i tried again to install itunes 7 and i keep getting the same error message. Anyone else having this problem? Can anyone give me some suggestions please?

    I would first try and remove both iTunes and Quicktime prior to doing the install of iTunes. The following link will show you how to remove both programs. Make sure you do Step 16 as it is usually Quicktime that causes problems with the upgrade.
    http://docs.info.apple.com/article.html?artnum=93698
    If it will not let you remove the programs, you can try using the Windows Installer Cleanup Utility. The download is about 1/4 of the way down the page. Good luck.
    http://support.microsoft.com/default.aspx?scid=kb;en-us;290301

  • Console error messages every time while trying to run Software Update

    Trying to check for updates and I get this message in console:
    com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [774] for authorization created by '/System/Library/CoreServices/Software Update.app' [768]
    I have not had any updates in a while, so I am thinking because of this.
    Anyone see a problem.
    Thanks
    Running Lion 10.7.1

    From here:  (by bengliang )
    LONG STORY SHORT, delete all the files in /Users/<yourusername>/Library/Caches/com.apple.SoftwareUpdate/ and then retry Software Update and it should work!

  • How to create a error message for Deleted batch while creating a PO

    Hi ,
    Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
    when a PO is created for a deleted batch at GI &GR lebel it is showing  a error message,
    but i want to show a error message while doing the PO creation.
    Thanks,
    Sachhi

    in badi  me_process_po_cust u can  put this message
    METHOD if_ex_me_process_po_cust~check.

  • For weeks I have been viewing a doggy day care via their web cam.  This weekend I upgraded to Lion and have been unable to view the center since.  I get an error message for java webcam class not found.  All of my software is up to date--suggestions?

    For weeks I have been viewing a doggy day care center via their web cam.  This weekend I upgraded to Lion and have been unable to view the center.  I get an error message for Java plug-in 1.6.0_29 ....webcam class not found.  Any suggestions on how to fix this?

    Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
    BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
    Regards.

  • How to prevent error message for material description in MDG material detail screen, when user click on check action

    Dear Experts,
    I have a requirement for making material description as non mandetory in change request view of mdg material screen.
    I have done that using field usage in get data method of feeder classes, but still message is displaying.
    This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
    How to prevent error message for material description in MDG material detail screen, when user click on check action.
    Thanks
    Sukumar

    Hello Sukumar
    In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
    You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
    Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
    Regards, Ingo Bruß

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • Error Message For BISystemUser: User not authenticated

    We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
    nqserver.log:
    ...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
    ...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
    In oracle support we found such issue (Doc ID 1308389.1):
    OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
    Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
    Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
    Getting error: Unable to Sign in. invalid username or password was entered
    Changes: Changed repository, deleted BISystemuser, added the user back
    Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
    Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
    Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
    It seem to be funny for PROD environment. How we cam resolve this problem?

    Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
    At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
    If that's the case you need to change the bisystemuser password to something known and update the credential store password.
    Another possibility might just be that you need to regenerate the GUIDs:
    http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

  • Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5

    imac 2.66 Ghz, Intel Core i5, OS 10.6.4.
    Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5:
    Adobe Air
    the installation of this app is damaged. Try re-installing or contacting the publisher for assistance.
    Tried several times to uninstall and reinstall from fresh download to no avail.
    I'm finding the instructions in the trouble shooting area a tad esoteric.
    Will there be an update to the installer released soon?

    Hi,
    I'm assuming your having troubles installing the 2.0.3 runtime?  If so, can you please try the instructions in this post?
    Thanks,
    Chris

  • Error message for  Unable to connect (BIB-16633)

    Dear All
    I use Oracle Jdeveloper10g (win32), Oracle database10g or 9i (win32 ver). But Failure to connect to OLAP service.
    Can anyone give me what is the error message for BIB-16633.
    Would be really grateful if you could give me a solution as soon as possible.
    Thanks & Regards,
    Mr.Tsang. Hong Kong

    For database versions you need to have at least 9206 for 9i and 10.1.0.4 for 10g. This requires you to apply the 9206 patchset to 9i and the 10.1.0.4 patchset to the 10g base install.
    Please note there are a lot of steps invloved in the patching process and you must make sure you have completed all the steps before creating your OLAP schema. Most problems occur because the patching process is incomplete and the OLAP option is in an invalid state.
    You can check the state of the OLAP option using the following commands in SQLPlus:
    column comp_name format a35
    SELECT comp_name, status, substr(version,1,10) as version
    from dba_server_registry order by modified;
    Once the OLAP option is in a valid state, then you must ensure the OLAPSYS account is unlocked. To test the OLAP environment you can install the BI10G sample schema which will create a new user account called CS_OLAP which contains an Analytic Workspace.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

  • Error Message for the cancellation of paid billing document

    Hi,
    Can i create and error message for the cancellation of paid billing document? If yes, how can i create such.
    Overview:
    Accounting document is created upon creation of billing document. Upon payment, document cleared is the accounting document created. There are instances wherein accounting document was already cleared but our user is still able to reversed billing document. Now, i want to create an error message or user exist wherein, when a user will not be able to reverse the billing document if the accounting document attached to this billing document is already paid.
    Thank you and best regards.
    Rachelle

    Hi Rachel,
    You can make use of the exit (Include) MV45AFZZ. The corresponding form routine is FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
    In this exit, For the given billing document ( which is going to be cancelled ), pick up the accouting document from BSEG tables.
    For this accouting document, Pass this to BSAD Table ( Customer clleared items) 
    If BSEG-BELNR = BSAD-BELNR and
      BSEG-Acc.Year = BSAD-Acc,year )..
    Then throw a error message and EXIT.
    So for all the cleared docments , user can not cancel the invoices.
    Regards,
    Sai

  • Error Message-- For Balancing field "Profit Center" is not filled

    Hi All,
    When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
    A PGI for the DNXXXXXXXX is not possible!
    Can u please help me how to resolve this issue ?
    WM Baby

    Hi,
    AS per configuration , there is prifit centre assignment  .Enter the profit centre in the field of profit centre by the help opf F4.
    Regards,
    Andra

  • Error message for Confirmation

    Hi,
    We have a error message for back end service entry creation  in the Application monitor for Confirmations.
    There is no outbound or Inbound Idoc found with error.
    From this error message how can we found the PO Number or Confirmation number to check whether the confirmation is posted or not?
    Thannks
    Jimmi

    Hi,
    If you are doing confirmation in SRM , it is Extended classic scenario.
    error : There is no outbound or Inbound Idoc found with error
    You   have not created the IDoc  for the outbound Idoc for the confirmation to take to the backend.
    Create the Message type and partner profile in WE20
    Create Distribution model in SRM -T.code :BD 64
    we found the PO Number or Confirmation number to check whether the confirmation is posted or not
    Soln: Check in confirmation in display/process confirmation in SRM enter the  timeframe
    (or) check in R/3  in ME23N by putting the Purchase order no and check the goods receipt
    Regards
    Ganesh Kumar.G.

  • Error message for running stored procedure

    Hello expert,
    I got error message for a stored procedure running as follows, will you please tell me what that error is? what is the reason for that error? appreciate very much.
    Job name=PROD DWH REPORT MART LOAD.1
    Job owner=DEVTEAM
    Job type=SQL Script
    Job status=Error
    Occurred At=Aug 9, 2011 5:26:29 AM EDT
    Target Name=proddw(Database Instance)
    Job output=
    Command:Output Log
    SQL*Plus: Release 10.2.0.3.0 - Production on Tue Aug 9 03:00:07 2011
    Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
    SQL> SQL> SQL> SQL> Connected.
    SQL> SQL> SQL> SQL> SQL> SQL>
    TO_CHAR(SYSDATE,'DD-
    09-aug-2011 03:00:07
    SQL> SQL>
    Many Thanks,

    What error? I can't see an error.

Maybe you are looking for