Error message for over delivery quantity in case of batch split.

Hi All,
System is throwing error message if I try to to enter delivery quantity more than target quantity(order quantity) in case of standard process which is ok but in case of batch split when split line created (9000001 for line 10) and if go to item level in line item 900001 and enter delivery quantity more than target quantity system is giving only information message, still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massege as well. Delivery item category for all the line items is same and status B is assigned to over delivery in item category. Is there any standard way of achieving this or do we need any modification, if yes then what user exit need to use.  
I searched alot about this in last three days but found only one thread which is unanswered, please provide your valuable suggestions. If this problem is discussed already and solved please provide me the link to that thread as I could't find any.
Thanks,
Davinder

Hi
Still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massage as well.
I think it you can possible to change the Information message as Warning message.
Please  go to SE91 put the Message Class XX (Ex:V1) there And in No. field enter the message number (Ex: If message no V1293 enter the number as 293)
AND
go for
where used in then select only Program >ok then Program will come select the Program > double click, you will l find the message with the Description.
Now with help of ABAP with just comment on these both the messages. Afterwards you will get the Error message.
Hope this will helps you
Dasaradha

Similar Messages

  • Error message needs to be generated in case of change in released PO.

    Hi all,
    please help me how to solve this issue
    <b>issue1:</b>
    Error message needs to be generated in case of change in released PO.
    1) change in incoterms,  
    2) payment terms,                 
    3) quantity                             
    4) rate.                                    
    The system should allow for change on the higher side.

    Hi ,
    I think you point no 3 & 4 can be solved using option available in release startegy and for point 1 & 2 u have to try with some user_exits. I think so , others can comment on this .
    Thanks
    Dipak

  • Error Message For BISystemUser: User not authenticated

    We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
    nqserver.log:
    ...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
    ...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
    In oracle support we found such issue (Doc ID 1308389.1):
    OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
    Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
    Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
    Getting error: Unable to Sign in. invalid username or password was entered
    Changes: Changed repository, deleted BISystemuser, added the user back
    Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
    Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
    Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
    It seem to be funny for PROD environment. How we cam resolve this problem?

    Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
    At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
    If that's the case you need to change the bisystemuser password to something known and update the credential store password.
    Another possibility might just be that you need to regenerate the GUIDs:
    http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

  • Itunessetup.exe couldn't be downloaded error message for for vista.

    itunessetup.exe couldn't be downloaded error message for for vista. Couldn't get the update so I uninstalled itunes and still get the error message. I tried reconfiguring the start up components with no luck. anybody know how to fix this?

    I actually had started on this before your post but you are right. My luck created some issues but after I got around that it worked. I uninstalled everything in the order it needed to. While I was doing this windows had an update. When I restarted something must have went wrong with the update and it crashed on the start up. took me a while to restore it but when I was done it brought back the programs in their damaged state.
    So I did the uninstall process again. restarted. and reinstalled and it all works now.
    Thank you for the help.
    For those reading this the order to uninstall goes as:
    iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support, iCloud, and finally MobileMe. Skip over any you don't have installed. Then Restart then reinstall itunes.

  • Pop up error messages for failed custom validation

    I am using jdev-10.1.3.4
    My application is in ADF BC
    I am writing custom validation through managed bean, I want pop-up error message for this failed validation.
    My problem scenario is:
    I had some list box as "status"-when this status changes to failed then the other field namely "closed date" should become madantory and also date in closed date field can't be in future.I am able to have all this validation through managed bean and also able to use af:messages through which i am able to print error message on the top of the form, but i am not able to give pop up error message for this failed validation.
    I had gone thru jdev guide but there is nothing like what i am asking.
    it would be of great help if someone can give me some example also.
    thanks in advance.

    ADF has global setting where you can configure the way messages are shown to user:
    You can make this setting in adf-faces-config.xml
    The <client-validation> element controls how client-side converters and validators are run.
    Three values are supported:
    "INLINE": validation is shown inline in a page (the default)
    "ALERT": validation is shown in an Javascript alert
    "DISABLED": validation is only handled on the server
    IN your case, set it to 'ALERT'.

  • Customised Error Message for ESS-MSS Applications

    Hello All,
    Currently, if there are any errors in the ESS/MSS transactions, we get the 503 error with lot of irrelevant data to the users. We have a basic html page which says, "There is a issue-Please contact XXXX".
    Is there a way to replace the standard error message with this html page ?
    PS: I am not talkign about the "Dispatcher Running" or "Application Stopped" messages, Please do not point me again to SAP Help website which doesn't answer my query. THIS IS ABOUT REPLACING THE STANDARD ERROR MESSAGES FOR ESS/MSS APPLICATIONS.
    Any help is much appreciated.
    We are on EP 7.01 SP3 (ESS 1.41)
    -Raj

    Hi Raj
    Let me clarify the difference between ESS and MSS errors and JAVA stack errors
    A "503 Service  not available" is not an ESS or MSS error - this is the thrown by the stack (possibly while navigating
    in ESS or MSS)
    The only information I have available in the case of java stack errors is to follow
    http://help.sap.com/saphelp_nw70/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
    Whcih indicates how to customize stack errors  like 404 or 500
    Lastly you can also decide to hide the stack trace as per KBA 1596212
    To modify an ESS or MSS message this may require modification to front and back-end HCM application - usually
    ESS gets error information based on back-end errors example "fill in all required fields"
    Hope this helps

  • I have an error message 0xc18a0406 (ink delivery failure)

    How do you fix error message 0xc18a0406 for Photosmart C7280.  I am using Windows 7.  I can not find the answer in the Manual.

    This is unhelpful answer from the HP support. What we have is a specific error code from a specific printer. Somewhere in the software, an engineer created this error message for a specific reason. What I get from this message is a generic: "I really don't know what the problem is, but if you reboot the system and the problem goes away, we're good right (The printer itself gives you that suggestion)? If not, its trash. Hope you're still under warranty. If not, go buy another printer." How many years of training did HP put this person through to give that answer? Perhaps it isn't a person after all? Perhaps it is just the auto responder to any question people have with an error code that begins "0x..."? Who is this person who's been responsible for so many posts and yet gets no Kudos? Isn't that a symptom of something wrong with customer support? Where is the button to say "No Kudos" or "Minus 1 Kudo for this post." It's unhelpful because it doesn't really help solve the problem or even indicate what the problem is. "Ink delivery failure" when the cartridges have been HP cartridges throughout the working life of this printer means it is a cheap printer made from cheap parts with software that is too complicated to debug completely. So it is stuck? Clogged? Broke? Unfixable? Comatose? Not worth explaining?
    "Relax, its a $200 printer when new. To really fix it would require a $50 part and $100 in labor. Better to go buy a new one if your warranty has expired." 
    "But I've got $120 in ink cartridges for the **bleep** thing?"
    "Think of those as collector items."
    "Ugh, it seems that the half-life of HP printers has been declining for the last decade. Instead of needing to buy a new printer every 5 years its getting close to 5 months."
    "HP Shareholders thank you."
    "%&@#*)*$+"
    "Can I help you with anything else? Perhaps you would like to see these beautiful photographs of smiling people and trees in a meadow?" 

  • How to write Error message for select options?

    Hi
    i have this select option statement
    SELECT-OPTIONS: s_fevor FOR afko-fevor.
    how to write error message for this?
    Regards
    Smitha

    Error messages are displayed for Select-options mostly on two conditions:
    1) You needs to check wether a value is entered or not its done by:
    a)
    Select-options:SELECT-OPTIONS: s_fevor FOR afko-fevor Obligatory.
       In this case error message is automatically throwed by system.
    b) You can do this in Selection Screen events.
    Ex:
    AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
    IF S_FEVOR-LOW IS INITIAL.
    MESSAGE 'XXXXX' TYPE 'E'.
    ENDIF.
    2) You need to Validate the entered value:
    You can do this in Selection Screen events.
    Ex:
    AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
    SELECT FEVOR
                 FROM AFKO
                 INTO AFKO-FEVOR
                 UP TO 1 ROWS
    ENDSELECT.        
    IF SY-SUBRC NE 0.
    MESSAGE 'XXXXX' TYPE 'E'.
    ENDIF.
    Regards,
    Gurpreet

  • [svn:fx-trunk] 11683: Clarifying error message for framework logging level.

    Revision: 11683
    Author:   [email protected]
    Date:     2009-11-11 20:33:57 -0800 (Wed, 11 Nov 2009)
    Log Message:
    Clarifying error message for framework logging level.
    QE notes: N/A
    Doc notes: N/A
    Bugs:
    SDK-23699 - Incorrect error thrown when you use the level LogEventLevel.ALL with ILogger.log()
    Reviewer: For Paul
    Tests run: Test case
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-23699
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/bundles/en_US/logging.properties

  • How to create a error message for Deleted batch while creating a PO

    Hi ,
    Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
    when a PO is created for a deleted batch at GI &GR lebel it is showing  a error message,
    but i want to show a error message while doing the PO creation.
    Thanks,
    Sachhi

    in badi  me_process_po_cust u can  put this message
    METHOD if_ex_me_process_po_cust~check.

  • For weeks I have been viewing a doggy day care via their web cam.  This weekend I upgraded to Lion and have been unable to view the center since.  I get an error message for java webcam class not found.  All of my software is up to date--suggestions?

    For weeks I have been viewing a doggy day care center via their web cam.  This weekend I upgraded to Lion and have been unable to view the center.  I get an error message for Java plug-in 1.6.0_29 ....webcam class not found.  Any suggestions on how to fix this?

    Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
    BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
    Regards.

  • How to prevent error message for material description in MDG material detail screen, when user click on check action

    Dear Experts,
    I have a requirement for making material description as non mandetory in change request view of mdg material screen.
    I have done that using field usage in get data method of feeder classes, but still message is displaying.
    This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
    How to prevent error message for material description in MDG material detail screen, when user click on check action.
    Thanks
    Sukumar

    Hello Sukumar
    In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
    You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
    Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
    Regards, Ingo Bruß

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5

    imac 2.66 Ghz, Intel Core i5, OS 10.6.4.
    Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5:
    Adobe Air
    the installation of this app is damaged. Try re-installing or contacting the publisher for assistance.
    Tried several times to uninstall and reinstall from fresh download to no avail.
    I'm finding the instructions in the trouble shooting area a tad esoteric.
    Will there be an update to the installer released soon?

    Hi,
    I'm assuming your having troubles installing the 2.0.3 runtime?  If so, can you please try the instructions in this post?
    Thanks,
    Chris

  • Error message for  Unable to connect (BIB-16633)

    Dear All
    I use Oracle Jdeveloper10g (win32), Oracle database10g or 9i (win32 ver). But Failure to connect to OLAP service.
    Can anyone give me what is the error message for BIB-16633.
    Would be really grateful if you could give me a solution as soon as possible.
    Thanks & Regards,
    Mr.Tsang. Hong Kong

    For database versions you need to have at least 9206 for 9i and 10.1.0.4 for 10g. This requires you to apply the 9206 patchset to 9i and the 10.1.0.4 patchset to the 10g base install.
    Please note there are a lot of steps invloved in the patching process and you must make sure you have completed all the steps before creating your OLAP schema. Most problems occur because the patching process is incomplete and the OLAP option is in an invalid state.
    You can check the state of the OLAP option using the following commands in SQLPlus:
    column comp_name format a35
    SELECT comp_name, status, substr(version,1,10) as version
    from dba_server_registry order by modified;
    Once the OLAP option is in a valid state, then you must ensure the OLAPSYS account is unlocked. To test the OLAP environment you can install the BI10G sample schema which will create a new user account called CS_OLAP which contains an Analytic Workspace.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

Maybe you are looking for

  • Any limit on the size of SATA disks used with X2100's (not M2's)?

    We've got an x2100 coming in (not an M2), and I need to outfit it with a couple of drives. The newer "green" Western Digital 1TB drives @ $130 a piece look pretty appealing. Is there any reason why drives that large wouldn't work in the x2100?

  • Flash CS5 Error

    I installed the flash pro cs5 trial last night. It gave the error for "FlashResource.dll", I did an entire search of my computer, I still couldn't find the file. I googled the error and followed the threads I found and nope nothing. I reinstalled and

  • Field dominance = NONE

    Is setting my field dominance to NONE in the sequence setting going to cause me problems down the line? I have noticed that if I do the above (after a lengthy render) the graphics I place on the timeline, lower 3rds etc created in motion, appear a lo

  • Can't make syncstatus because of RealDownloader

    When I connect my phone on my computer I get a message that RealDownloader is using my unit. If I want to show syncstatus I have to turn it off. How do I do that? I have Lumia 800.

  • X-FI Xtrememusic not default midi device (vis

    I need to set X-FI as the default midi device but i cannot find anything on my computer to set the midi device at all. I have windows vista and had to download the drivers for it. I am guessing this is the problem. If anyone knows where i can go on m