Error message for starting OracleHome81ManagementServer service

I want to start OracleHome81ManagementServer service in the service which is in the Control Panel( windows 2000 professional ), but i got the following error message... i don't know where and what i should fix... please help...
Could not start the OracleHome81ManagementServer service on Local Computer
The service did not return an error. This could be an internal Windows error
or an internal service error.
If the problem persists, contact your system administrator.
Thanks...

I checked that all sevices were started. There was no problem.
All services were started normally. Even I tried several minutes after.. I got same error message.
Hi,
Probably by that time, Oracle service is not started when you tried to login. It takes a while to start the service automatically, so you try after a few minutes of starting the machine and try again.

Similar Messages

  • Error message for Confirmation

    Hi,
    We have a error message for back end service entry creation  in the Application monitor for Confirmations.
    There is no outbound or Inbound Idoc found with error.
    From this error message how can we found the PO Number or Confirmation number to check whether the confirmation is posted or not?
    Thannks
    Jimmi

    Hi,
    If you are doing confirmation in SRM , it is Extended classic scenario.
    error : There is no outbound or Inbound Idoc found with error
    You   have not created the IDoc  for the outbound Idoc for the confirmation to take to the backend.
    Create the Message type and partner profile in WE20
    Create Distribution model in SRM -T.code :BD 64
    we found the PO Number or Confirmation number to check whether the confirmation is posted or not
    Soln: Check in confirmation in display/process confirmation in SRM enter the  timeframe
    (or) check in R/3  in ME23N by putting the Purchase order no and check the goods receipt
    Regards
    Ganesh Kumar.G.

  • Installing itunes to my laptop I get an error message  Apple mobile device service fail to start verify that you have sufficient privilegesto start system services

    Installing itunes to my laptop I get an error message  (Apple mobile device service fail to start verify that you have sufficient privileges to tart system services)

    You seem to have installED iTunes and are trying to connect your iDevice, is that right?
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Your statement - "installING" - also might indicate that you have insufficient privileges in Windows to properly install & use iTunes.
    If you can't install or update iTunes for Windows - Apple Support
    ÇÇÇ

  • I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer

    I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer. This usually works fine, so I don't know what I did to keep it form working.

    Are you using Windows? This tells you how to restart the AMDS for Windows.
    http://support.apple.com/kb/ts1567

  • I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (what does this mean?)

    I recently updated my iTunes to the most recent version and I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (Does anyone know what this means and if it is going to cause me issues?)

    http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

  • Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

    Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
    Can I uninstall existing iTunes without losing my media library?  and then install fresh to fix this problem?

    Hi there kweitkamp,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    -Griff W. 

  • HT1688 I have a PC computer and an I-phone 4s.  I set up an i-tunes acct online w/ icloud.  after a recent update my computer started receiving an error message on start up.  it says "AppleSyncNotifier.exe - Entry Point Not Found".  I click OK and it move

    I have a PC computer and an i-phone 4S.  I set up an i-tunes acct online w/ icloud.  After a recent update my PC started receiving an error message on start up.  It says "AppleSyncNotifier.exe - Entry Point Not Found".  It also says, " The procedure entry point smlTextreaderConstName could not be located in the dynamic link library libxml2.dll".  I click on OK and it moves on.  It doesn't seem to affect my computer, but it's annoying.  Any ideas on correcting this?

    UPDATE - (Made a second post so it'd be clearer)
    I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
    Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
    In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
    I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
    On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

  • Startup error message while starting up Windows after installing NI Circuit Design Suite 10

    Hi.
    I recentely acquired NI Circuit Design Suite Student Edition v10.
    After installing it on my computer I began receiving the following error message everytime I booted up Windows.
    Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    I checked the Windows logs and found other error messages when the system booted:
    Event Type: Error
    Event Source: Application Error
    Event Category: (100)
    Event ID: 1000
    Date:  12-01-2008
    Time:  13:17:54
    User:  N/A
    Computer: THINKPADT30
    Description:
    Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 6e 69 64   ure  nid
    0018: 6d 73 72 76 2e 65 78 65   msrv.exe
    0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
    0028: 20 69 6e 20 75 6e 6b 6e    in unkn
    0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
    0038: 30 2e 30 20 61 74 20 6f   0.0 at o
    0040: 66 66 73 65 74 20 30 30   ffset 00
    0048: 37 66 63 36 36 66         7fc66f 
    Event Type: Error
    Event Source: Application Error
    Event Category: (100)
    Event ID: 1004
    Date:  12-01-2008
    Time:  13:18:51
    User:  N/A
    Computer: THINKPADT30
    Description:
    Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 6e 69 64   ure  nid
    0018: 6d 73 72 76 2e 65 78 65   msrv.exe
    0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
    0028: 20 69 6e 20 75 6e 6b 6e    in unkn
    0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
    0038: 30 2e 30 20 61 74 20 6f   0.0 at o
    0040: 66 66 73 65 74 20 30 30   ffset 00
    0048: 37 66 63 36 36 66         7fc66f 
    Event Type: Error
    Event Source: Application Error
    Event Category: None
    Event ID: 1001
    Date:  12-01-2008
    Time:  13:21:33
    User:  N/A
    Computer: THINKPADT30
    Description:
    Fault bucket 619997672.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 42 75 63 6b 65 74 3a 20   Bucket:
    0008: 36 31 39 39 39 37 36 37   61999767
    0010: 32 0d 0a                  2..    
    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7034
    Date:  12-01-2008
    Time:  13:18:12
    User:  N/A
    Computer: THINKPADT30
    Description:
    The National Instruments Domain Service service terminated unexpectedly.  It has done this 1 time(s).
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    I checked the forums at NI and found a similar problem with a computer with Windows Vista installed. I have Windows XP Professional installed on the computer, but tried the update through the self updating feature of the NI software.
    After the update the problem remains exactly the same.
    To find out more about the error, I checked several Windows properties to identify the cause of the problem. One thing I found was on the Services control, under Administrative Tools. After the error message during boot, the services window shows up 2 services whose status is "Stopping" and the startup type is "Automatic". This services are:
    Lookout Citadel Driver
    National Instruments Time Sincronization
    I'm using an IBM ThinkPad T30 (Type 2366-BG1) with Windows XP Professional with 768Mb of memory, 80GB HDD.
    Can anyone give me some hints on this matter?
    Thank you in advance.

    Good morning.
    I tried the steps suggested but the problem remained. I then decided to try some aditional steps and apparently the problem is solved. I describe the steps I took bellow.
    The problem was related to my antivirus / firewall solution, Panda Antivirus + Antispyware 2007.
    1. I changed the previously mentioned Windows services startup to "Manual" instead of "Automatic".
    2. Rebooted the computer.
    3. Opened the services control in Administrative Tools.
    4. Selected the first service "Citadel..." and pressed the "Start" button.
    5. After a few seconds, the firewall solution presented a window stating that the program was attempting to access the internet (or my LAN). I selected "Always allow".
    6. I repeated this step for all the others NI services. Some produced the same feedback, others didn't.
    7. Changed the startup type of the services to the values I had written down before.
    8. Rebooted the computer and everything worked fine.
    It seems my firewall solution is unable to cope with a program trying to access the Internet (or network) before a user logs in.
    Thank you for your support.
    Best regards,
    Alexandre Ventura
    Message Edited by AlexandreV on 01-25-2008 04:56 AM

  • Error message when starting MaxDB instance

    I am getting the following Error message when starting the MaxDB instance after a series of failed attempts at starting the DB Manager Backup for our PI 7.1 server.
    "-24994,ERR_RTE: Runtime environment error
    1,Cannot create ipc db directories for SID (OS error code 11000)"
    Max DB version : 7.7.02
    Does anyone have any specific pointers on where the issue could be.
    Any help is greatly appreciated.
    Regards,
    Murali Narayanan

    Hi gurus,
    I'm a complete newbye searching the forums in order to decrypt what is inconsistent to me (I'm acting as a substitute for a real dba): a sapdb refusing any more connection due to an 'user space exhausted' issue.
    I do not even know if/where some admin tool is/isn't installed - eventually, what to look for - onto the running demianapachetomcat framework. Actually, all I have been provided was: 1. call 'Henplus' (done); 2. connect this way (jdbc:sapdb://localhost/database&options) and 3. select, upgrade, delete what needed. Problem arises on point (2): connection resufed 'user space exhausted'.
    My question is: this issue seems so similar to mine, how can one eventually check/modify this '/sapdb directory space'?
    Thanks in advance for any (much appreciated) hint, and be patient about my English and newbyeness (?).
    MaxM

  • I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB.   lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive?

    I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB.   lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive?  I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents"  I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?

    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
    Other things you can do to gain space.
    Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
    This app will help you locate files that you can move/archive and/or delete from your system.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • Error message on start up "Lightroom encountered an error when reading from its preview cache and needs to quit"

    Error message on start up "Lightroom encountered an error when reading from its preview cache and needs to quit" I uninstalled and downloaded it again and still get the same error.  At this rate I won't have any chance to use the 30 day trial period as it simply isn't working.  I have see suggestions elsewhere to delete a particular file, but I don't have it.  Any ideas?

    You need to trash the preview cache. It’s in the main catalog folder.
    Delete the folder with the ending Previews.lrdata
    The default location for the Lightroom folder is normally Pictures/My Pictures if you did a standard installation.
    N.B. do not touch files ending .lrcat

  • Error message when starting OC4J in JDeveloper 10.1.3.1

    Hello,
    I am new to Java Server Pages and OC4J. When I try to run a simple JSP page in JDeveloper 10.1.3.1, I get the following error message (edited):
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    ...\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config>
    [waiting for the server to complete its initialization...]
    Error parsing internal-settings.xml: server-extension-provider class 'oracle.j2ee.ws.server.mgmt.runtime.InterceptorContainerExtension' not found
    oracle.classloader.util.AnnotatedClassNotFoundException:
         Missing class: oracle.j2ee.ws.server.codegen.ServerArtifactGenerator
         Depending class: com.evermind.server.ejb.compilation.Compilation
         Loader: oc4j:10.1.3
         Code-Source: ./j2ee/home/lib/oc4j-internal.jar
         Configuration: <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar
    Diese Load wurde um system.root:0.0.0 mit der Methode Class.forName() eingeleitet.
    Die fehlende Klasse ist in keiner Code-Source oder keinem Loader in dem System verfügbar.
    at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2068) [./j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
         at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1679) [./j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
         at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1635) [./j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
         at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1620) [./j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
         at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap:1.5.0_06]
         at java.lang.Class.forName0 (Native method) [unknown, by unknown]
         at java.lang.Class.forName (Class.java:242) [jre bootstrap, by jre.bootstrap:1.5.0_06]
         at com.evermind.server.ejb.compilation.Compilation.generateWebServiceRefs (Compilation.java:1541) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ejb.compilation.Compilation.compile (Compilation.java:189) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ejb.compilation.Compilation.doGenerateCode (Compilation.java:264) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ejb.EJBContainer.postInit (EJBContainer.java:898) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationStateRunning.initializeApplication (ApplicationStateRunning.java:217) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.Application.setConfig (Application.java:413) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.Application.setConfig (Application.java:314) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServer.initializeSystemApplication (ApplicationServer.java:1557) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServer.initializeAutoDeployedApplications (ApplicationServer.java:1544) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:974) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:131) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap:1.5.0_06]
    Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
    Any idea, what's wrong with my configuration?
    Thanks,
    Wolfgang

    Tested JSP page in JDeveloper 10.1.3.1; JSP page does not generate an error.
    Reinstall JDeveloper.

  • Error Message For BISystemUser: User not authenticated

    We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
    nqserver.log:
    ...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
    ...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
    In oracle support we found such issue (Doc ID 1308389.1):
    OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
    Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
    Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
    Getting error: Unable to Sign in. invalid username or password was entered
    Changes: Changed repository, deleted BISystemuser, added the user back
    Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
    Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
    Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
    It seem to be funny for PROD environment. How we cam resolve this problem?

    Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
    At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
    If that's the case you need to change the bisystemuser password to something known and update the credential store password.
    Another possibility might just be that you need to regenerate the GUIDs:
    http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

  • Error message for  Unable to connect (BIB-16633)

    Dear All
    I use Oracle Jdeveloper10g (win32), Oracle database10g or 9i (win32 ver). But Failure to connect to OLAP service.
    Can anyone give me what is the error message for BIB-16633.
    Would be really grateful if you could give me a solution as soon as possible.
    Thanks & Regards,
    Mr.Tsang. Hong Kong

    For database versions you need to have at least 9206 for 9i and 10.1.0.4 for 10g. This requires you to apply the 9206 patchset to 9i and the 10.1.0.4 patchset to the 10g base install.
    Please note there are a lot of steps invloved in the patching process and you must make sure you have completed all the steps before creating your OLAP schema. Most problems occur because the patching process is incomplete and the OLAP option is in an invalid state.
    You can check the state of the OLAP option using the following commands in SQLPlus:
    column comp_name format a35
    SELECT comp_name, status, substr(version,1,10) as version
    from dba_server_registry order by modified;
    Once the OLAP option is in a valid state, then you must ensure the OLAPSYS account is unlocked. To test the OLAP environment you can install the BI10G sample schema which will create a new user account called CS_OLAP which contains an Analytic Workspace.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

  • Error Message-- For Balancing field "Profit Center" is not filled

    Hi All,
    When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
    A PGI for the DNXXXXXXXX is not possible!
    Can u please help me how to resolve this issue ?
    WM Baby

    Hi,
    AS per configuration , there is prifit centre assignment  .Enter the profit centre in the field of profit centre by the help opf F4.
    Regards,
    Andra

Maybe you are looking for