Error message for the T Code VL02N

Good morning gurus,
I have this poblem with the transaction VL02N : when I try to launch an outbound delivery, I get this message: "Item to be picked by WM picking quantity cannot be entered)".
FYI, I enter the stock location and the picking quantity manually.
Thanks for your help!!!

Hi,
In the picking tab : Picked quantity (entered manually) is equal to delivery quantity (which is available in stock as appearent in MMBE)
In Processing tab : Picking - C - fully picked
WM status - - No WM trnsf ord reqd
As for the storage location, it is assigned to a WH and nothing is running in the background.
Thi is very strange to me...
You said that SLoc assigned to a WH and you also said that WM status is "No WM trnsf ord reqd" (VBUP-LVSTA, in our system the text is "Not relevant" for this field if it is empty).
Since your SLoc is asigned to a WH I cannot understand why this status says it's not WM relevant.
If the item would be WM relevant (normally) you would have been not bale to input the picked qty manually...
My further questions:
- Does your material has WM view (for the WH that is assigned to the Plant/Sloc combination)?
- Can you see stock in LX02 for your material (under the SLoc, transaction code LX02)? What can you see in MB52 for the same SLoc? Are the reports in harmony?
- Are you facing the same error if you create a new delivery with the same item where the delivering Plant is the same as well as the SLoc?
- Delete the picked qty and change the SLoc to a non-WM managed SLoc > after that input again the SLoc that is assigned to th WH. What happens (WM status should appear, and picked qtry field should get disabled for manual input)?
I've checked OSS notes, there's only two in connection with this error message, none of them cover your problem (755559, 132767).
Regards,
Csaba
Edited by: Csaba Szommer on Jan 27, 2009 7:52 PM

Similar Messages

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Error Message for the cancellation of paid billing document

Hi,
Can i create and error message for the cancellation of paid billing document? If yes, how can i create such.
Overview:
Accounting document is created upon creation of billing document. Upon payment, document cleared is the accounting document created. There are instances wherein accounting document was already cleared but our user is still able to reversed billing document. Now, i want to create an error message or user exist wherein, when a user will not be able to reverse the billing document if the accounting document attached to this billing document is already paid.
Thank you and best regards.
Rachelle

Hi Rachel,
You can make use of the exit (Include) MV45AFZZ. The corresponding form routine is FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
In this exit, For the given billing document ( which is going to be cancelled ), pick up the accouting document from BSEG tables.
For this accouting document, Pass this to BSAD Table ( Customer clleared items)
If BSEG-BELNR = BSAD-BELNR and
BSEG-Acc.Year = BSAD-Acc,year )..
Then throw a error message and EXIT.
So for all the cleared docments , user can not cancel the invoices.
Regards,
Sai

HT1338 I am getting an error message for the Update store, saying "To Update this application, sign in to the account you used to purchase it."

I am getting an error message for the Update store, saying "To Update this application, sign in to the account you used to purchase it." how do I get rid of these Old unneccisary Updates? anyone?

Welcome to Apple Communities
What's this app? You need to use another Apple ID to update it

Error message for the select options

hi.
i want to throw thw error message if the user enters the value not valid(not in the range) for the zregion1 of zbwcntry of the select options.
and user should be able to correct it before moving ahead.
Also,iis not a mandatory field,So if it is initial,it can b blank.
but if the input doesnot lie in the range,it should give error message on the selction screen.
please guid with the line of codes.

Check out this code:
TABLES: PERNR.
SELECT-OPTIONS VO_PERNR FOR PERNR-PERNR.
AT SELECTION-SCREEN ON VO_PERNR.
IF VO_PERNR IS INITIAL.
    MESSAGE 'Enter some employee IDs' TYPE 'E' DISPLAY LIKE 'S'.
ELSE.
    IF '000001' NOT IN VO_PERNR.
      MESSAGE 'Employee id: 1, not selected' TYPE 'E' DISPLAY LIKE 'S'.
    ENDIF.
ENDIF.

Regarding Error Message for the purchase order

Hello SRM Experts,
The Status of the purchase order is Archived and PO is not transferred to the backened system. I ran the transaction bbp_pd_po_transfer_exec in P36 and check the error message in T-Code RZ20, i get the following error in RZ20 for the PO as:
1. Error reading the export data for EXEC of purchase order
2. and in P36 system, when i press F5, popup message appears - Error while reading PO in backened system. Inform System administrator.
I want to know, why this problem appears and how to resolve this issue ?
Thanks in Advance,
Regards,
B.Satyanarayan Reddy

Hello,
I checked in the bbp_pd and there also i got the popup message as Error while reading PO in backened system. Inform System Administrator.
I also checked with the backened team, everything seems to be fine there.
The thing is that PO is not transferred to the backened system since 13.02.2008 to till date and it stuck up in the EB system.
Kindly let me know, why this problem occurs and what should i do to resolve the issue.
Thanks in advance,
Regards,
B.Satyanarayan Reddy

How to get rid of error message for the material?

Hi everybody,there is a material which is showing an error message whenevr try to create a sales order, i've checked the material master...there is no check in X-plant Mtrl or X-dist chan or any flag for deletion...but still the red error message comes up while creating a sales order...how to get rid of this error?

this means material is blocked for procurment
three kinds of block can be there
01 Blocked for procment/whse
02 Blocked for task list/BOM
03 Blocked for Purchasing
GOTO MM42 give material n plant data
Select BESIC VIEW
there is a field called as material block remove the blocking reason
Hope this will help
Edited by: WISH on Mar 24, 2008 6:33 AM

ITunes Store - ERROR MESSAGE for the past 2 days

I've been trying to access the iTunes Store to continue buying music and to redeem a few gift cards, but every time I click on "Redeem" or "Purchase", I receive this error message: "We could not complete your iTunes store Request. An unknown error occurred (-9808). There was an error in the iTunes Store. Please try again later."
All I can do is listen to the music and search. Can you please fix this? I even downloaded the latest version of iTunes and the same message still appears. I've used this laptop for more than a year to purchase music and never had any issues. I believe the error is on your end - not mine.
THANK YOU!!!

hello!
mine has been 4 days without ANYTHING happening at all when I try to purchase something from I-tunes, songs and apps for my iphone!
no error message comes up for me at all.
I get as far as entering my password then nothing...............

When I select "plugin check" for updates, I have received a "try again later" error message for the last three days.

for the last few days, I've been experiencing long pauses or crashes while viewing a movie or clip using adobe flash. i've had no update requests for flash from auto updates. so my next thought was the flash plugin. however i'm not able to get the plugin updater to work. i get the error message listed above.

2 links for Plugin Check. Both are working for me on my XP system with Firefox 3.6.13.
*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*https://www.mozilla.com/en-US/plugincheck/
You must have JavaScript on (Tools > Contents, check "Enable JavaScript")
If you use NoScript, you must allow (or temporarily allow):
*on the first link, '''''mozilla.com'''''
*on the second link, '''''mozilla.com''''' and '''''mozilla.org'''''
 
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Adobe PDF Plug-In For Firefox and Netscape "9.4.0"
**New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
**'''''Security update for versions 9 and 10 of Adobe Reader released 2011-02-08'''''
*Java Plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
**Firefox 3.6+ requires at least version 1.6.0_10
**16 updates behind
**You may want to remove the old version before installing the new version; link to removal instructions below
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

I was now downloading Mt. Lion on my macbookpro and about half way through it gave an error message for the second time. It won't restart!!!! Help???

I am trying to download Mt. Lion on my macbookpro and about half way through it gives me an " an error has occured" message. This is the second time!!. How do I restart the down load??? Normal app store route does not work???? or get a cd..

3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

How to delete the error message in the Web page Message Monitoring

Hi All:
I'd like to ask a question.If there is error message in the T-code sxmb_moni->Monitor for Processed XML Messages,I can cancel the error message manually and archive the message. After that,I can delete the message from "Monitor for Processed XML Messages".
But after those operation,I find in the web page " Message Monitoring", there are still messages in the "Messages from Component Integration Server and/or Adapter Engine".
How can I delete those message both successful and error.
Thanks All
Elliott

Hi Elliot,
SXMB_ADM
Integration Engine Configuration
Specific Configuration
Category: DELETION
Parameters: PERSIST_DURATION, PERSIST_DURATION_ERROR
Subparameters: SYNC, ASYNC
Change "Current Value".
and execute your delete job again!
Regards,
Udo

ABAP FI: Validation for the Txn Code F-28 & F-29

Hi,
I am looking to issue a Error Message in the Txn Code F-28 & F-29, in case the Document Currency is not same as the Customer Master Sales Area Currency (KNVV-WAERS).
I am trying to achieve this by using SAP FI Validation's but I am only Getting the BKPF & BSEG field for the Validation's and not the KNVV-WAERS.....
How to handle this scenario? Do I need to use VALIDATION Exit here?

I solved my problem using user-exit only with the help of the good document posted on SDN for Validation's.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0bc693c-76d8-2910-fd81-e891248a02c5

Where can I see the error msg in the below code.

Hi Gurus,
Please have a look at the code.
 if abc is initial.
 return-message = cl_bsp_runtime=>get_otr_text( 'ZXYZ/ERR_EMPID' ).
 append test to test_tab.
 endif.
In the above code, Emp id input field is being checked as its mandatory. I would like to know where can I see the error message per the above code. what is get_otr_test??

go to SE63 and see it from there..
SE63-> Translation->OTR Objects->Short Text
in field Package key in 'ZXYZ'
and in field Text from OTR key in 'ERR_EMPID'
and go forward.
I hope this helps.
For more info see the link below
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/6ad43aa654be55e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/93/bccd3a00746f4ae10000000a11402f/frameset.htm
If useful answer..reward points and close the thread.
A.

Unable to open PDF portfolio (Error Msg: "For the best experience, open this PDF portfolio in...)

I am having a problem opening an important PDF portfolio document using Adobe Reader (version 11.0.02) for Mac (Mountain Lion version 10.8.3).
When I attempt to open the file, I come up with the error message: "For the best experience, open this PDF portfolio in Acrobat 9 or Adobe Reader 9, or later", and I am unable to view the document. This is becoming very frustrating, as I am attempting to open the document with the new version of Adobe Reader (which I have downloaded multiple times).
If anyone has a solution for this problem that would be very helpful!
Thanks in advance.

Hi,
Thanks for the reply. No I'm not using iPad, I have a MacBookPro. I just wasn't sure which forum was best to post this question in.
I have flash but Adobe still won't open my documents.
Anyway, thanks for your help.
Lauren

Error Message for PR

Dear all,
I want to pop up the error message for the condition like if Open PR is available for the material and user once again indenting the same then user gets error message like Open PR available for material. Is it possible ?
and,
one more help If stock is available for the material even also user indenting the material then my requirement is how to stop this process. can i start any warning or error MSG for the same ? if yes then how ? please guide its urgent.
Neha

Better to implement MRP run process in your Organization.
System will always check OPEN PRs,Open POs, Stock pending in system and will not allow to generate a PR if open qty available in system. Define minimum and Max qty in material master and activate MRP type.
Please find complete business process and complete presentation and documentation for the same.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f4d6c1-0808-2d10-2ea5-f9b2863cfed8?
QuickLink=index&overridelayout=true
Also implement PR Release strategy so that Site Incharge will always check requirement and then will approve for PO process.
Its very helpful.
Regards,
Sandesh Sawant

Error message for the T Code VL02N

Similar Messages

Maybe you are looking for