Error Message from DWCS4: Error in line 27 of form.js.php

Hi
I did a seach of the forum for this and came up blank, so here goes although I am sure I am not alone with this one...
This week I installed CS4 and get an error reported whenever I open up an ADDT Dynamic Form:
"There is a syntax error on line 27 of form.js.php. Code hinting may not work until you fix this error."
The line in question is:
NXT_Messages['are_you_sure_move'] = '';
Anyone else seen this ?
Should I be concerned ?
Thanks.

Hi Wollombi,
I´ve seen this too with DW CS4, but in fact there´s nothing to "fix" because it´s the same code which was used by ADDT 1.0.0.
I just guess that the DW CS4 parser stumbles across the nested apostrophes which don´t seem to produce PHP errors in the browser.
Should I be concerned ?
I´ve always ignored this message because the forms work when opened in a browser
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Similar Messages

CS4 - a syntax error on line 27 of list.js.php

I am getting a message
"There is a syntax error on line 27 of list.js.php. Code
hinting may not work untill you fix this error"
Does anyone have a fix?

> The file I refer to "list.js.php" is generated by
dreamweaver
> It is located in includes/nxt/scripts/
What operation causes it to be generated? I have never seen
DW create such
a file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"The Wackonerd" <[email protected]> wrote in
message
news:gifvsr$5di$[email protected]..
>
quote:
> So, just suggesting that you try naming the file without
multiple dots,
> but use a single dot for the extension signifying the
file type you
> think DW should recognize. Perhaps an underscore for
deliniating to
> human eyes what the file may reference, but is not. ie:
list_js.php
>
>
> The file I refer to "list.js.php" is generated by
dreamweaver
> It is located in includes/nxt/scripts/
>
>
>
>

Sending message from PL/SQL procedure to form

Hello Friends,
How can I send messages from PL/SQL procedure to Form ?
Ultimate target is catching progress of PL/SQL procedure from
form. I heard about DBMS_PIPe but not sure,.
Adi

Hello,
Yeah , I got the solution using DBMS_PIPE function,I
followed following steps.
1. Pipe is created. see below procedure.
create or replace procedure proc_testpipe as
     v_pipe_integer          integer;
     v_pipe_message          integer;
begin
     v_pipe_integer := DBMS_PIPE.Create_Pipe('adipipe');
     dbms_pipe.pack_message('Hello Adinath Kamode,Message
     from Pipe');
     v_pipe_message := dbms_Pipe.Send_message('adipipe');
     end;
end;
2. then I created one Function which will obtain message from
Pipe and
will return value to form.
create or replace function proc_callpipe return varchar2 as
v_msg          integer;
v_rem          integer;
v_message          varchar2(500);
begin
v_msg:=dbms_pipe.receive_message('adipipe');
dbms_pipe.unpack_message(v_message);
dbms_pipe.purge('adipipe');
v_rem := dbms_pipe.remove_pipe('adipipe');
return(v_message);
end;
3. Last I called this function from form.
Cheers .. !
Adi

I cannot update IPhoto or IMovie- Error message from App Store

Hi there-
I cannot update IPhoto or IMovie. I have the latest OS. I cannot use these Apps either- they both ask me to update to the newest version, but when I try to I get an error message saying that the App store could not complete my request and to please try again later (null). Any ideas??

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Dynamic Error Message from a Bundle Showed in a rich:fileUpload

Hello.
There is a way to show a dynamic error message from a bundle (i.e, There is a problem in the word {0} in line {1}.) in a rich:fileUpload after the Managed Bean method in fileUploadListener="#{MyManagedBean.myMethod}" attribute was performed? That's because the error message parameters are discovered only after the MyManagedBean.myMethod execution.
As far I know, I'm able only to show a static message with transferErrorLabel="#{myBundle.myErrorMessage}" attribute.
Here is my rich:fileUpload component code:
<rich:fileUpload id="upload"
     fileUploadListener="#{PlanilhaManagedBean.importar}"
     maxFilesQuantity="100"
     immediateUpload="true" listHeight="130" acceptedTypes="xls"
     addControlLabel="#{bundle.geralProcurarArquivo}"
     ontyperejected="alert('#{bundle.geralExtensaoInvalida}')"
     cancelEntryControlLabel="#{bundle.geralCancelar}"
     clearAllControlLabel="#{bundle.geralLimparTudo}"
     clearControlLabel="#{bundle.geralLimpar}"
     doneLabel="#{bundle.geralArquivoTransferidoComSucesso}"
     progressLabel="#{bundle.geralTransferindoArquivo}"
     stopControlLabel="#{bundle.geralParar}"
     stopEntryControlLabel="#{bundle.geralParar}"
     transferErrorLabel="#{bundle.geralErroNaTransferenciaDoArquivo}" /> Any idea?
Thanks in advance.

Hi, BalusC. Thanks for your reply.
I already tried that. I put a navigation-rule in faces-config.xml to the same page of the rich:fileUpload, but the rich:fileUpload component doesn't starts a get or a post request. So the navigation-rule is ignored and the page wasn't rendered again.
I also tried to put the <a4j:support ...> in the rich:fileUpload to re-render the <h:messages ...> component, but didn't work too. The <h:messages ...> wasn't re-render.
Thanks in advance.
Edited by: reolca on May 10, 2009 5:40 AM

ERROR WHILE FORWARDING VOICE MESSAGE FROM NOTES VIEWMAIL TO ANOTHER VOICEMAIL USER IN UNITY CONNECTION

Hello All,
I am facing problem while replying/forwarding or sending a NEW Voice Message from ViewMail integrated with IBM LOTUS Notes 8.5 to the other Voice Mail User Configured in Cisco Unity Connection.The ViewMail Version is 8.0.2 for IBM LOTUS Notes.UC version is 8.x
I have attached the file that displays the error.
From the view mail inbox if i "Right Click" any email and the "Click ON Forward" I am able to forward the Voice Message from the ViewMail to the IBM LOTUS Domino user [ that is forwarding it to EMAIL Account ], but if I try to forward it to unity user is gives "Failure Delivery".
Now when I double click the individual voice mail message in ViewMail account and then click on "Forward/reply/NewMemo" icon available on the individual voice message window that I have opened ,I get an error as stated below
"The remote name could not be resolved error in Notes ViewMail 10.0.0.152e_vmws_gen_property_not_found "
where 10.0.0.152 is the IP-Address of my Unity Connection Server.
Also just for the information I am able to Login into Cisco PCA for alll the users and able to view the Inbox.
I am able to forward the VoiceMessages between Unity Connection users via CISCO PCA without facing any issue.
A Quick Help will be much appreciated .......... :-)
Hasan Jafri

Hello Craig,
After spending sometime on troubleshooting , just for testing purpose I created two new Unity Connection Voice Mail User and configured VMN [VoiceMail for Notes] account on the same lotus Notes.
Interestingly this time I was able to use Reply & Reply to All option to send the Voice Message via VMN. {WORKING JUST FINE,NO PROBLEM WHAT SO EVER ]
But still I am NOT able to use Forward option to send the Voice Messages via VMN.
REPLY WITH HISTORY & REPLY TO ALL WITH HISTORY options are also not working.
This is error that I am getting
"Error in QueryServe in CoreUCClasses 213 at line 336:Vmws:The remote server returned an error:(403) Forbidden
I HAVE CREATED VIDEO RECORDING FOR THIS ERROR & WORKING PART OF THE CONFIG TO GIVE YOU A BETTER IDEA OF THE PROBLEM.
Its 7 MB Recording. I hope you can easily Download.
Also important point is that i don't see any previous error that was accuring during my earlier testing.
Thanks & Regards,
Hasan Jafri

PARSE_APPLICATION_DATA Error during XML = ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789

Hi Experts ,
i have a scenario proxy to soap where i am getting error while getting the response .
we are sending the request successfully and getting response .some times we are getting in proxy level error below
PARSE_APPLICATION_DATA Error during XML => ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789 (Cha
Please help us to fix this bug in proxy response.
Regards
Ravi

Hello Ravinder,
Can you please post the complete stack trace, it seems to be some fields are getting truncated i,e data sent from the program to the proxy object might be violating some length restrictions.
Please check your message interface field lengths and what is being passed to the proxy.
Regards,
Ravi.

Capturing Custom Error Messages from Database Triggers

Hi Everybody
When i fired a trigger it should show only the custom message from RAISE_APPLICATION_ERROR
instead of showing all the message....
ORA-20103: We Cannot Delete the emp_id 5610
ORA-06512: at "emp_id", line 89
ORA-04088: error during execution of trigger 'delete_emp_id.trg'I want to show only the custom message
We Cannot Delete the emp_id 5610Thanks in Advance

Not possible AFAIK.
Instead of RAISE_APPLICATION_ERROR, define a custom exception, call it and just print it onto the console (using dbms_output). You can't pop it out though.

Database Connection Error: Cannot obtain error message from the server

I have a SQL statement that wants to add a temp table to the database.   The SQL statement works fine but when I try to add it via 'Add Command' feature in Crystal XI R2, I get the following error message:
Database Connection Error: Cannot obtain error message from the server
Any ideas?
Thanks in advance,
Zack H.

Hi Raghavendra,
I am using this in the 'Add Command' feature but I get the error message displayed in the subject line:
CREATE TABLE #TibetanYaks(
YakID char(4),
YakName char(20) )
INSERT INTO #TibetanYaks (YakID, YakName)
SELECT LastName, FirstName
FROM      Employee
WHERE      EmployeeID between '2000' and '3000'
I haven't tried to add this as a stored procedure but I imagine it will work as I have no problems yet with stored procedures. I simply want to be able to use temporary tables for the sole purpose of that session and not creating anything static in the database.
By the way, even though I get the error message, when I look on the backend database, I see that the temporary table was successfully created...its just not brought across correctly in Crystal.
Any ideas?
Zack H.

Error when i try to create a panorama pic. in Ps. i got this message : Error 8: Syntax error. Line: 132 - args.putEnumerated( keyMode٬ typeBlendMode, enumDarken );

when i try to create a panorama pic. in Ps. i got this message : Error 8: Syntax error. Line: 132 -> args.putEnumerated( keyMode٬ typeBlendMode, enumDarken );
everything with last updated the OS , Java , and PS version .
any help pls

What software are you using? PS version. OS version etc. Also check you have all the updates for your version of Photoshop installed. That your only selecting image files to be stitched. That a javsscript error message from one of the Stack Script Only that get used when you use Photoshop Photomerge Script.

When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?

It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Error message from iTunes

I have been using iTunes with my iPod mini for ages and it works fine. I recently got a message saying some songs in the library have not been copied because the iPod software is too old. There are indeed some songs in the library that have been unchecked and are not on the iPod. It seems a pretty random selection. I can manually check the songs in the library and then they update OK on the iPod.
The error message says to go to www.apple.com/ipod to get the latest updater. I downloaded the latest version, 2006-06-28 and it tells me I am running the latest iPod software, v1.4.1
I also re-installed the latest iTunes as well, but I still get this same message. Anyone know where it comes from and what I can do ?

http://docs.info.apple.com/article.html?artnum=300554
If Windows has difficulty reading information off iPod or iPod shuffle, it may display a message from the System Tray, indicating there's a corrupt file and to please run the Chkdsk utility.
(Apple) recommends using the latest version of iTunes to restore iPod because this will address the file system issue and will also defragment the iPod drive. Although you can use the Chkdsk utility to fix file system errors on the drive mapped to iPod, Chkdsk will not defragment the drive.
More information is at the above link (I just pasted snippets of what I saw).

Error message from labview when trying to set up the DAQ assistant

I recieve a message from labview when I try to set up the DAQ assistant and select a channel to use. The error I get states "An exception occured within the external code called by a Call Library Node. This might have corrupted LabView's memory. Save any work to a new location and restart labview". Labview then freezes. I have reset the DAQ device in trying to slove this but I still get the same message. How do I solve this?? thanks - mars2006

Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

Error Message from DWCS4: Error in line 27 of form.js.php

Similar Messages

Maybe you are looking for