Error message from mail

For the past few weeks I've been getting an error about not being able to receive mail, but I can, sometimes. Recently switched internet providers but it was happening prior to that. Any thoughts would be appreciated.
Haven't changed any settings on my mail server or preferences for a long time.

rmdpub wrote:
Yes, I get errors 5-6 times per day during business hours for approx. 15 minutes at a time. I set the account up in Thunderbird and then kept an eye on it over the course of a few days. It didn't experience any connection errors.
Try some of Mail debugging options from this hint. Compare the results from when you get errors to when you don't get errors. If you can point a finger at something and say "here is where it breaks", then I encourage you to file a bug report.
What is this error? Are there any discussions about it?
Some attachments are encoded incorrectly: http://discussions.apple.com/message.jspa?messageID=10594685

Similar Messages

I keep getting a connection failed error message from mail every time my computer goes to sleep, is shut down and/or I change network connections?

Mail mail was working fine for months but now I keep getting an error message every time my computer shuts down or even goes to sleep. I get the exclamation point error and when I try to reconnect it always falis. My internet connection is fine and nothing else is losing connections. The only way to fix it is to shut down mail completely and restart which fixes the connection every time, but it's getting really frustrating have to constantly shut down mail and restart it just to use my email.

Bump ???

WiFi connected but message from mail and Safari "can't connect to server"

My WiFi went down and rebooted. WiFi connected on iPhone, IPad and MacBook Pro. The iPad gives an error message from mail, Safari and other apps, "can't connect to server". What is wrong and how do i correct settings on the iPad?

Hello MBreck47
There are a few more things you can try to troubleshoot issues with maintaining a connection to Wi-Fi. Check out the article below for those steps to resolve your issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Regards,
-Norm G.

On starting up firefox i am getting an error message from javascript application telling me that my username is an invalid username/password combination.If i continue to get this error message,try entering my email address as my username.

Hi,on starting firefox which i have used solely as my browser for years i am now getting an error message from java script application that shows my username followed by a message saying; 'username'-Invalid username/password combination.If you keep getting this error,try entering your email address as your username'. I then press the OK button within that error message box and it dissapears and everything seems ok although hover my cursor over the mail(envelope) icon and it says not connected.
I only started having this problem since downloading firefox 4.It also does not tell me where this problem is occuring so i do not know where to log on with this information.I would be most grateful for any help with this matter.Many thanks.

Take a look in the Error Console for details about that.
Tools > Error Console <br />
Right-click the message and use '''Copy''' to get that complete message.

IPhone error message from iPad

In the middle of syncing my iPad (3G) this week it hung, and I had to shut the computer down as it froze too.
Since then, I cannot use the 3G connection when I'm away from my wi-fi; Settings does not work (I can open it, tap General, tap Wi-Fi then it freezes); and I get an iPhone error message from iTunes when I connect my iPad(!) to my Powerbook (OS 10.6.7, iTunes 10.3.1). And iTunes sometimes recognizes the iPad as a Device, but often does not.
I do have an iPhone 4 connected but it works fine.
The iPad connection error message is:
Any clues?
BeemOs

Did you set up Gmail as a mailbox in the Mail App on your iPad?

When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?

It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

Error message from source system

Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
AP

Hi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar

Error Message from SAP GUI

Hi,
I have designed a Custom screen for one of my requirements. However when the screen is displayed, I am facing an error message from SAP Front End Server that says " Erroneous data received from server. Application may not work correctly".
What could be the reason ?
Thanks & Regards,
Venkatesh.

Hi,
Please check the belos SAP notes
1453114 Maximum string length
1161022 Dialog box "Erroneous data received from server"
1524462 - Erroneous Data received from server. Application may not work correctly.
Regards,
Naveen.

Error message from Adobe Reader. cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly. Print looks like gibberish

Trying to view/print PDF documents from website. Print looks like gibberish and is unreadable. Problem is with the embedded fonts. Error message from Adobe says cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly.

Try Adobe support, that's not a Firefox support issue. <br />
http://forums.adobe.com/index.jspa

Error message from Internet Explorer v8.0.6

My Muse test site is currently on Business Catalyst. The url is http://wfax-test.businesscatalyst.com — my client says that they get an error message from Internet Explorer version 8.0.6 "MuseJSAssert: error calling selector function: error: a security problem occurred". The good news is that this only appears on the "Schedule" page of the site. Any idea what it could be? My client is afraid for me to put the site online because of this error message.

Hi Artby,
In your page, you have a link to "http://[email protected]//[email protected]" (Saturday Afternoon at 3:00). This link is technically a valid link, but I'm not sure it is what you intended. If you where looking to create an email there, you should remove the http:// in front of the link and Muse should properly create an email link. If you were trying to go to a website, I'd recommend you check the URL again to make sure you have it right.
The link is throwing a security error because we have to do some extra processing for some of our links, so we check each of the urls and try to determine if there is extra logic we need. In this case, this link is telling the browser you'd like to "login" to the site qemi.org with the username "apostle". IE 8, by default, will block us from reading information from this type of link in case there is a password, or in case we shouldn't know the username. It is a security measure (thus the error) and should pose no risk.
If you did intend to have that URL, then this won't quite work at the moment in Muse. To work around this, you could pull out this small snippet into a custom HTML element or something, which Muse won't try and process (though you'd need to remove the class "nonblock" from the link if you copy/pasted the Muse export code).
Hope that helps,
Andrew

Error message from ABAP to BW portal

Hi
I need to write error message from ABAP to BW portal.
If I write as usual: message E001(ZBW).
Then I get a dump in portal.
Does anyone know how to post error message in this case?
Thanks.

Hi,
You need to use the function module RRMS_MESSAGE_HANDLING to post any kind of messages in the report output/web template or portal.
You can pass the values trough the below parameters:
              I_CLASS = 'ZBW'
              I_TYPE   = 'W'
              I_NUMBER = '006'
Regards,
Shilpa

Error message from ABAP to portal

Hi
I need to write error message from ABAP to BW portal.
If I write as usual: message E001(ZBW).
Then I get a dump in portal.
Does anyone know how to post error message in this case?
Thanks.

Hi
Good
Check the below sdn link.
portal runtime error in BW
Thanks
mrutyun^

Error Message from VM TMS 13.0

Dear all,
We have receive some error message from the VM TMS 13.0, that is installed a month ago.
<ErrorCode 1000>
Message="Faulting application name: TMSSNMPService.exe, version: 1.0.4008.29206, time stamp: 0x4d12159c Faulting module name: mscorlib.ni.dll, version: 4.0.30319.18444, time stamp: 0x52717d7e Exception code: 0xc0000005 Fault offset: 0x0000000000cd5bf7 Faulting process id: 0x116c Faulting application start time: 0x01cf68076319516f Faulting application path: C:\\Program Files (x86)\\TANDBERG\\TMS\\Services\\TMSSNMPService.exeFaulting module path: C:\\Windows\\assembly\\NativeImages_v4.0.30319_64\\mscorlib\\abf62e6545d2802fc60286678a67e6bf\\mscorlib.ni.dll Report Id: 371654ff-d3fb-11e3-98ea-005056b1027a"
<ErrorCode 1026>
Message="Application: TMSSNMPService.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.AccessViolationException Stack: at System.Runtime.InteropServices.Marshal.ReadInt64(IntPtr, Int32) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VbToObject(Tandberg.CommLib.SnmpLib.WinSnmp.SMIVALUE ByRef) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VblToHashtable(IntPtr) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.OnSnmpMessage(IntPtr, IntPtr, Int32, UInt32, UInt32, IntPtr)"
<ErrorCode 7031>
Message="The TMSSnmpService service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds:
Any comments on the above error?
Best Regards,
Ben Lai

This seems to be happening on 14.2.2 as well.
Component: Application Error
Severity: Warning
Event class: /App/Failed
Device class: /Server/Windows/WMI/TMS
Systems: None
Summary: Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id:
Message:
Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id: 0x39c4
Faulting application start time: 0x01d04d36eb9b6c36
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\system32\ole32.dll
Report Id: e334bd6f-b990-11e4-aa1d-842b2b6be310
http://tools.cisco.com/security/center/viewAlert.x?alertId=29142

Error message from mail

Similar Messages

Maybe you are looking for