Error Message;GetCurrent position - Hel
I've used Sound Blaster 24 bit external for a couple
of month's now, almost no problems till last night!
For no known reason, an error message will pop
up on the screen GetCurrentPosition Failed
Direct sound error 80004005.
And the only way to get the computer working again
is to reset it! Any suggestions, PLEASE!!!
I'm running windows xp on a laptop. That's the same
thing (Error) That happens when I either unplug the
usb connector, or power supply while the blaster is
on ( Which, of coarse, I understand, and don't do )
Thanks for ANY HELP!
Hi Francois,
I have found a note that might help solve your issue
1037901 Error during copying in transaction PPOME
1104954 PPOME: Error 5A 505 when copying objects
other customers had similar issue in their user exit, check if you have set up one.
Hope this help
Sarah
Similar Messages
-
Hi experts,
I need to reverse a reversal (asset retirement) but it is not possible according to error message AA462 when using AB08.
Procedure is to manually post a document with reversed positive/negative signs from original posting.
When I try to create manual posting on my asset retirement revenue G/L account (credit posting key) I get error message "specify positive values only" so I cannot post the document. I cannot post with debit posting key because asset retirement is only possible as a credit revenue posting.
What can I do then?
Thanks,
BenHi Ben,
If it's a inconsistency referred to in SAP note 1273856 implement the note. If it solve the problem but you have incorrect postings in the tables SAP Support needs to to the necessary corrections to the document line items. In this case please open an message.
Regards Bernhard -
Error message while copying a position in PPOME
Hi,
I get the following error message when trying to copy a position in PPOME
Error during copying. The action has been interrupted.
Message no. 5A505
Any ideas what might cause this?
Regards,
FrancoisHi Francois,
I have found a note that might help solve your issue
1037901 Error during copying in transaction PPOME
1104954 PPOME: Error 5A 505 when copying objects
other customers had similar issue in their user exit, check if you have set up one.
Hope this help
Sarah -
How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B
During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks
Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.
-
Error Message: Conversion of file content to XML failed at position 0: sun.
Hi Experts,
i strugle with a File 2 IDOC Scenario.
In the sender communication channel monitoring I get the error message:
Conversion of file content to XML failed at position 0: sun.io.MalformedInputException
Unfortunately I am not getting any further information and I do not know where the file-adapters problem is.
Tthe .fieldSeparator = # . Can this be the problem, that the file-adapter-engine can not handle # within file conversion? I also tried it with .fieldSeparator = '#' . But the error message is the same.
I am glad for any hints.
Thank you for your help in advance.
Regards,
UdoHi Udo,
The error is due to wrong intput.
putting # might be a reson.
You Can try (,) or a space as a field separater.
Can you test this once.
Have to defined the field separated?
Regards,
Sumit Gupta -
"Attempt to position before start of file" -Error Message preventing Bounce
I am running Logic Express 7 on my G5. After creating, recording, and saving a project file, I have been receiving the following error message whenever I try to bounce:
Attempt to position before start of file
result code = -40
As my file starts exactly at 1 1 1 1 ... I don't understand why this message occurs.. Can someone explain/assist ?No. The bounce dialog box is showing the same start and stop times as the track. The real issue appears to have been that I had two different separate track selections in the same track window..(due to stopping the recording process, and restarting again later..) Now that I have merged them into one the problem has been solved ! Thanks for your help anyways.
-
I was doing some minor editing in Logic Pro 9.1.8, like adding some plug-ins to audio and midi tracks on numerous songs. Most of the songs I had no problem bouncing. For some reason 2 of the songs I tried to bounce kept showing me this error message:
"Error in parameter list / Not an existing volume, and no default volume / Bad positioning information / Bad drive number" result code=-50.
The songs open and play fine, but won't let me bounce. I've worked with Logic for a few years and this has never happened. Any suggestions?
Thanks,
JohnnyFixed! Ran disk utilities and repaired my external HD.
-
Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem. -
Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly I got the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, that stated: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program fo fix. then I got the message, iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) I have had iTunes since I purchased the iphone in 2012. I have only updated the product since then until today when I did the uninstall ans reinstall as stated in above directions. I am not sure what is different now. please help
I had this problem as well but found the soultion on another post from turingtest2 - it worked for me:
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me
Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization -
I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
Spry validation error message position
Hi all,
I really like the spry validation however I would like it so that when you hit submit and the form has errors, another error message appears near the button so the user knows when there is an error.
Is this possible?
Cheershttp://labs.adobe.com/technologies/spry/samples/validationwidgets/TextareaValida tionSample.html
Check out the section on "You can define a separate HTML element to display the error messages for this widget." -
Error Message in Time schema (Positive)
Dear All,
I have created to error msg in Table v_t555e and also i have written PCR.for loss of pay.
but my newly created error message is not reflecting after time evaluation.
PSA grouping with time recording =01
Msg Type =1 Error set via operation COLER in time evaluation
No of Msg type =77 01day Loss of Pay
78 0.5 day Loss of Pay
I checked in cluster B2. its saying that FEHLER table does not have any entries for that particular date ( 03.09.2008)
what would be the problem, are there any more configuration has to do?
Kind regards,
Dinesh.Hi sreenu,
yes, i have done all bellow mentioned grouping and i checked v_t555e table also. every think is correct.
PSA groping with time rec =01
MSg type 01
No of Msg =77 (Loss of pay ) this is the error msg that i created in table V_T555E
best regards
Dinesh. -
am running windows 8 and yesterday evening i started getting this weird error message i uninstalled aniweather and reloaded more of the same tonight i uninstalled mozilla and reinstalled 3rd verse same as the 1st(sorry my sarcasm/humor gets the better of me when things start getting..... annoying)
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
My daughter told me her Mac mini isn't booting up past the grey screen. I put in the install disk and started it up pressing "C" and used Disk Utility to attempt to figure out what's up. I got the following error message:
Could not repair due to underlying task failure on exit (-9972)
Does this mean the hard drive is toast? I don't have any HD repair software-with all my Macs I've never run across a problem that the boards here or Disk Utility couldn't fix for me. I don't know if she damaged the drive (she claims the cat chewed on the edge of the mini-sounds a bit like the "dog ate the homework"), or if it failed. It was purchased last year when Tiger was released, so it should still be under warranty. Any ideas about what I could try next?
Thanks
~margaret
17 iMac G4 1.25GHz 160GIG HD Mac OS X (10.4.3) G4 iBook, Mac mini, 10G iPod, iPod mini (pink!), Apple IIGSDale, although the -9972 error is probably some serious data error on the drive, which can sometimes be solved by an Erase & Install of Mac OS X, the fact that the Hardware Test reports an issue probably means that the data error was caused by physical damage on the drive.
I have to say that I find your post(s) most unhelpful. It' true that the informatin contained in them can be useful, however, you could have made the effort to sort it for iMargB. The fact that you didn't, plus your posting of the exact same post in two different threads, makes me feel that you are in a hurry, and that you sacrifice quality to quantity. Trying to help as many people as possible is a good thing, however, we are here to help (or to be helped), not to overwhelm people with information, hoping that they will figure it all out on their own.
iMargB, the Hardware Test is not part of Mac OS X, it is a system-specific volume, which explains why it is included on your original disc rather than on the Tiger one. Your guess of using the latest OS's Install disc was a good one though, when it comes to using Disk Utility for example : attempting to repair a Tiger installation with a Panther disc is not a good idea, as it might damage it instead, because of the differences between Panther and Tiger.
Although I know little about the Hardware Test's error messages, the "Master" part is not what would worry me, as it could just be the position of your hard drive's jumper (which could be Master, Slave, or Cable Select). However, if the Mass Storage test is failing, I would suspect a hardware issue with the drive itself. Hardware Test is known to miss a few things sometimes, but the reverse isn't true. Thus if it reports a bad drive, I think it is safer to assume that there is an issue than to assume that Hardware Test is wrong. Moreover, the "Invalid Node Structure" is very likely due to physical damage (as I already said), therefore, zeroing out all data and reisntalling Mac OS X or using Disk Warrior could be very temporary fixes.
If you have a FireWire cable, I would suggest booting your Mini in FireWire Target Disk Mode to retrieve as much data as you can, with another Mac such as your iMac or iBook. Instructions can be found here. There may still be a chance that the other Mac could see the drive, so not all your data would be lost. Then, I would take it to Apple for repair, as the drive could be failing.
Maybe you are looking for
-
When I click on the Firefox icon on my desktop the browser appears but a pop-up also appears with the above statements. It also suggests that "this may be phoney and someone may be trying to impersonate the site and you shouldn't continue." What do I
-
Can no longer configure modem in Airport Extreme Base Station
We've been using our AEBS to connect to our ISP via its internal modem for several years. Recently, I needed to update some ISP information for the modem connection and did so successfully using Airport Admin Utility. Two days later, tried to change
-
Java programming in mySAP ERP 2004
Greetings With mySAP ERP 2004, Can I do java programming instead of abap programming?. My intention is not to depend on ABAP programmers for simple tasks. Thanks Gonzalo
-
I am trying to burn photos onto a CD so that it will be read by Windows, Mac or at photo stores. I have followed all the instructions but the burning process is still going after more than an hour. Why is it taking so long? I'm not even filling up th
-
How to use " External Routing " in Human Task (BPEL Process)?
Hi All, Can anyone help me to provide any url or suggestion about "External Routing" in Human task? Thanks in Advance. Sharmistha