Error message IM063 while closing service order
Hi,
I am facing an issue of error message-IM063 (Plant is not assigned to sales org and distribution channel) while closing service order or changing status into TECO. When i checked plant and sales area assignment all looks fine as there are some other service order which has same equipemnt and closed.
Thanks for your reponse.
Regards,
Rakesh
How you created the Service Order (either through BAPI or manually)?
If you created using BAPI, please see the below note.
[Note 702763|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=702763]
Similar Messages
-
Error message SE508 while create Service Entry Sheet (ML81N)
Hi,
In client production system we are facing problem of getting error message SE508: Error in account coding allocation just after we click "adopt services"tab while creating service entry sheet (with respect to PO)Tcode ML81N.Please analyse the problem and give us solution as why it is happening? Please look at error screen shot with steps followed (in attachment) for your reference.
ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.> click "adopt services"> here we get error message "SE508":ERROR IN ACCOUNT CODING ALLOCATION
Regards
Rahul ShuklaHi,
I would suggest you to check the note 1087090 first.
Further I would like to recommend you to deactivate the exit EXIT_SAPLMLSK_001 in case it is active in
your system.
If the note 1087090 doesn't apply, please check the services data in the tables ESKL and ESLL. If PO services data have been deleted in the corresponding PO item, please check all of the deletion indicators in ESKL and ESLL. There must be an inconsistency. For example: the field 'LOEKZ' has been set in the table ESKL for the PO item, but it does not reflect in the table ESLL.
In table ESLL, there is no logical or physical deletion but the
services in the table ESKL has been marked (i.e logically deleted) -> this could be the reason for the error message SE508. For this case please open a SAP ticket to get help with the correction of the inconsistency.
Regards,
Edit -
ABAP dump Error while creating service order in PCUI.
Hi Experts,
We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors RAISE_EXCEPTION
Date and Time 02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
| function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj PatilHi Thirumala,
Thnaks for the reply.
I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil -
Error while saving service order?
Dear SAPIENTS,
While saving service order system is throwing error in commitment check
message number CO634
can anybody tell where i need to check to resolve this problem?
Regards,
Kaushal Raihi
In FMAVCR01 you can see the amount avaialble for the fund center and commitment item combination ,
in the maintenance order itself from the menu Goto>Assignments>fund center
i think you are using the funds management where the system picks up the commitement item for the respective material in the order you specified ,kindly consult with your FICO person also
regards
thyagarajan -
Error While Closing the order???
Hi Experts,
I am facing error while closing maintenance order.
can anyone provide me the solution.
please find the attachment and do the needful.
Thanks & Regards,
Sunil BoyaHi Sunil,
As I do not have much exposure to this area, I would suggest you to:
1. See this thread Can not Close Orders for which Period is closed? | SCN
and go through the answer of Paul Meehan
2. Search Google with String 'SAP message CO688' . you will find several useful SCN links on the subject.
3. Wait for Experts answers to this thread.
Jogeswara Rao K -
Stop Message while saving Service Order from IW51
Hello,
I am getting bleow error while saving service order.
System: Status object does not exist. Message Numner IW351
Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
USEREXIT_SAVE_DOCUMENT_PREPARE
From this depending upon the some validation i am populating Error message,
I am creating sales order through service order from the Transaction IW51.
When i Try to save the service order i get the error messages which is coming from my validation which
I had put in the MV45AFZZ.
After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
As soon as i click on that i get a STOP messgae.
Which i as below.
System: Status object does not exist
I m not getting why it is coming.
Kindly Help.
Regards
SachinHi,
After MESSAGE add STOP. :
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
STOP.
or If ambiguity with usage of STOP being obselete use EXIT after message.
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
EXIT.
BR
Dep -
Error while closing process order
Dear friends,
I wants to close my process order. While closing the order i am getting following error:
System status CRCR is active (ORD 70000623)
Message no. BS013
Diagnosis
Object ORD 70000623 has system status CRCR (Control recipe created). According to this status, transaction 'Complete' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
Please guide me to solve this
Thanks
SenthilHi Sri,
Thanks. U have not told" If i select SEND button, where it will be sent?".
In t.code CO54, i am getting 7 messages.
Message number 1--got the status of SENT
While sending message number 2,
: i am getting "Destination Error" --show below:
Error 1
<b>Destin. Z001: Char. PPPI_MATERIAL_PRODUCED for target field QUANTITY_PRODUCED is not in the message</b>
Message no. CB341
Error 2:
<b>Message could not be processed by destination Z001 COCI_CONFIRM_MATERIAL_PROD
Message no. CB361</b>
Diagnosis
The destination Z001 is assigned to the selected process message via the message category. In the message category, the characteristic PPPI_MATERIAL_PRODUCED is assigned to the target field QUANTITY_PRODUCED of this destination. However, this characteristic is not contained in the process message.
It is possible that the message cannot be processed by the destination Z001.
Procedure
1. In the message log, check whether the message has been sent to destination Z001.
2. If the message has not yet been sent to any destination, you can now complete and send it from the message monitor.
If the message has been sent to other destinations, but not to the destination Z001, manually post the message data if necessary.
Please advice me ..how to solve..even i could not understand the error.
Give your mail ID , i will forward the error with screen shots
Thanks
Senthil -
Everytime iTunes opens on my Windows 7 pc, I get the error message -42110 while it appears iTunes is trying to download a movie I didn't order. Any suggestions?
Thank you i been looking for a answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!
-
In DP50 Error during material determination for service order
Hi,
While doing Resources-Related Billing request,the following error is displaying..
Kindly Help
Error during material determination for service order
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
501384
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
Thanks,
MohitHi mohit,
You need to check DIP profile setting if profile is attached to your order type or not please check this
Thanks and regards
Sachin Kadam -
Problem while Creating Service order through Work Order
Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.Closed..
-
I am facing the problem on downloading apps from Mac App Store, when I try to install the application from App store, I am getting an error message "Status_Code_Error" while click on "Login"
Same problem here in Brazil.
It seems to be a problem with logging in App Store in the Mac (Yosemite 10.10.2).
When I tried the very same userid and password I was able to login in to use my iCloud account from the same computer and also from my iPhone. -
Error Message AM057 while deleting contact person
Hi,
Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
The performance assistant shows nothing but message no. AM057.
Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
Data in table ADRVP looks as under.
Cl. Person Seq. No. Table Field Application table key pers.addr. Key Addr. no. Owner
300 0200591046 1 KNVK PRSNR 2000000093060 BP 0200026699 X
300 0200591046 45333695 KNVK PRSNR 3000007093060 BP 0200026699 X
Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
Thanks,
BalajiDear Balaji
You have asked same question In Different places
Re: Error Message AM057 while deleting contact person in customer master -
TS3694 What does it mean when I get error message 3194 while trying to restore my ipad?
What does it mean if I receive an error message 3194 while trying to restore my ipad?
I received this message after connecting my ipad to itunes. There is a display of a cord connecting to itunes which is initially why I was alerted to connect my ipad to my itunes account on my laptop.
Any help is appreciated.Turn of any firewall or antivirus software.
-
Installing itunes to my laptop I get an error message (Apple mobile device service fail to start verify that you have sufficient privileges to tart system services)
You seem to have installED iTunes and are trying to connect your iDevice, is that right?
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Your statement - "installING" - also might indicate that you have insufficient privileges in Windows to properly install & use iTunes.
If you can't install or update iTunes for Windows - Apple Support
ÇÇÇ -
Prevent invoice creation for closed Service Order
Hi ,
Is there a way to prevent invoices from being created against a closed Service Order?
Thanks,
JogradHello,
If the service order is Business completed, then it is not possible to reate invoice from the same.
If the status is technically completed, then your can create invoice through DP90.
Prase
Maybe you are looking for
-
How do I use metadata text box in Aperture Book
When I hit the button for a text box, I get a text box. Likewise for a new photo box. What I really want is a metadata text box and when I hit that button nothing happens. I have tried it with a photo selected and on a blank page. How do I use the me
-
No Wi-Fi or Bluetooth on iPod Touch 3rd
hi guys , i have a problem with my ipod touch 3rd generation and i was unable to turn Wi-Fi or Bluetooth on or off because the setting is grayed out or dim. if you can help me out i will be grateful. this ipod is for my lil brother and without wifi
-
I am trying to authorize my pc bt cannot find the store menu to authorize
i am trying to authorize my computer it says to open itunes in store menu, select authorize this computer but i cannot figure outwhere thestore menu is
-
Record column level changes of table for audit.
Hi Experts, I need suggestion on recording column level changes in table for internal aduit purposes, our company policy does not allow us to enable CDC and CT on database levels so I am looking for whar are other the best ways for doing the same ?
-
How do i get rid of that hair that shows up in my photos all the time.
Have tried cleaning all lens as directed by manual and vacummed the inside (but did not let the vacum actually touch anything. still their...... especially in back lit shots.