ERROR MESSAGE IMPORTING CD

For the very first time ever, I've gotten a message, as soon as I try to import a cd, which states, "An error occured while trying to import the file... The current encoder settings for bit rate and sample rate are not valid for this file". WHAT!!!!!! I've NEVER had any trouble importing my CD collection into iTunes. Especially not while importing with the AAC Encoder. Does anyone have a clue as to why we're now getting this error message? Is there a fix to this problem? The bit and sample rates have ALWAYS been valid before. So why the change now. Could this be some sort of back-handed way from Apple, to have us stop putting our CD collections into iTunes? (I know it's a stretch) When I use the LOSSLESS Encoder or MP3 at higher bit rates everything works fine. But, as everyone is well aware this encoding takes up way more space, therefore less tunes in our iPods. I vaguely remember reading somewhere that eventually we won't be able to transfer our CD's (that we payed for) onto digital, portable music players. We'll have to buy everything from places like the iTunes store. I've also heard from different people that eventually, we won't even own anything anymore. We'll only be able to rent music, videos, dvd's, etc. We won't be able to store anything permanently onto our hard drives. If you want to listen to your favorite music, you'll have to pay everytime for the same songs over and over again. Does anyone at Apple know what this problem is all about? I'd appreciate any help whatsoever. Thanks.

I don't think so, it's saying the iTunes Library file cannot be saved. The disk you are using is full....

Similar Messages

  • I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message:  Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

    I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message:  Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

    Julian,
    Pages simply won't support a table with that many rows. If you need that many, you must use another application.
    Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
    There are probably other ways, but that's what comes to mind here.
    Jerry

  • When opening a msword file wit .doc extension i get an error message: import error. The file format is not valid

    when opening a msword file with .doc extension i get an error message: import error. The file format is not valid

    Looks like. I tried in the TextEdit format tab to set all the combinations while opening the file, like plain text, rtf and html without success. Always I get the same signs.

  • Image Capture Error Message Import Error -9912

    Hi
    I was backing up the photos and videos from my iPhone 5s to an external hard drive that I have. I have done this many times before without a problem. Today, I encountered an error. It said "Import Error (-9912)" and 1,025 items were not imported.
    Please could someone explain what this error message means and if possible give me some tips to solve it.
    Thanks
    Nick

    Try the links in "More Like This" to the right, and also google "Import Error (-9912)"
    (Looks like you're not alone with this error, those links might have some other suggestions)

  • Error message Importing clips

    I have an external drive with quicktime clips on it. I could not use the log and transfer tool to bring these in I kept getting an error message stating "Clips contain unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media". These are .mov files why is log and transfer not allowing me to import? The clips are DVC PROHD 720p 60 I am able to import (only one at a time) using MPEG Stream Clip exporting as Apple DVCPRO 720p 60.

    "Clips contain unsupported media or has an invalid directory structure...."
    You have to copy the entire card that the camera records on with all the sub folders. Simply copying the clips will cause this error.
    As for MPEG Streamclip only converting one clip at a time, [read this|http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0].

  • Organizer Error message importing to Editor

    Okay I have pse 5 on my windows computer, I just upgraded to CS4. Now I have installed it on my computer. When I open the organizer, select my photo to be edited by CS4, under Edit there is an option for Photoshop along with Editor. When I click on it, I get this error message An error occurred attempting to edit to the external editor. I click okay and Im taken back to the organizer. Nothing goes to cs4. Do you have any idea what has happened? I would love to continue using the organizer and it was suggested that I select my photos, drag and drop into Photoshop which does work. However I first select my photos and put them on the page as I see fit, save the file, close all the photos. I then go to the kit I want in the organizer and select the papers I want and drop them into Photoshop. I add those to my page and close the paper files. Then I go back and try to get the png files and none of those with drag into CS4. I have to open them through File open in CS4. So I figured if I got the option part to work, Id solve my other issue.
    Thanks, Marcie

    My advice is uninstall the current version of MediaSource, go to the downloads page (click the link Support > Downloads on this page), and get:
    . Creative Zen and Jukebox Driver Upgrade version .30.03
    2. Creative MediaSource Player/Organizer 3.30.2
    3. Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource
    Install . then connect the player to the PC. Then install 2. and 3. (the player must be connected for 2. to verify you have a Creative product).

  • OWB error message - Import service related

    Hi,
    I get this message when I try to use the Import Metadata wizard in OWB - 11.
    Import service failed when try to make connection to the metadata location and got the following error:java.lang.NullPointerException .
    I have also registered the user and tested the corresponding user connection.
    Any suggestions will be much appreciated.
    Thanks.

    Hi,
    I have got this issue resolved by installing the Oracle 11 E-Edition . Guess that's the only way this can be resolved. As though the Personal edition offers most of the Enterprise Edition options , including OLAP , there is an issue when owb queries the v$version view of the personal edition (searches for 'Oracle%' and does not get a result) due to which this error arises.
    If there are any other alternate approaches , do suggest for the common good.
    Many thanks.

  • Error Message - Import Manager

    Helllo All
    I recieve a message when trying to import some records
    The Map cannot be loaded because the table "Record" is not a source.
    We are "missing" the table "Record" from the dropdown.
    Can some one tell me how I can add/fine this table again?
    Regards
    Con

    Hi,
    In your case the "Record" disappears whenever you have only one record in your XML file. Instead of displaying nodes under "Record", it displays all fields under its parent node (let us say "Records").This situation occurs specifically whenever you are trying to import an XML file without refering to an XML Schema.
    To make things clear further: You created a map with an XML file that has more than one record i.e., with a file that has the "Record" node. So, whenver you try to open the map with another XML file that has only one record it fails as there is no "Record" node.
    Solution: Always refer to an XML Schema. This way, you are enforcing the XML structure i.e., "Record" node will be available even if you have only one record in your input XML file.
    Please let me know in case you need more details in this regard.
    Hope this helps,
    Regards,
    Rajani

  • Error Message : "Importer detected a generic error" Please Help.

    My problem is most likely very simple, with the research I've done I've concluded it is one of 2 options(probably):
    1. The project settings are wrong - I've tried quite a few within NTSC(where I should be) but the same error occurs. I am using videos taken by my Iphone 4s. I'm just not sure on any of it and couldnt seem to find an answer online.
    2. I didn't import them correctly. I've been importing them simply just by clicking on the files from my iPhone's folder while it is plugged in and dragging them into another foler on my computer. I know this isn't correct but I didn't have a importing software and I could still watch them on Windows Media Player so I thought it was fine.
    It could be something else but I have everything installed for it to work so I'm not sure. I may need to download a program that allows me to convert specific properties or something?
    I'm pretty confused with all the properties to videos and video formatting so I'm having difficulty solving this on my own. Thanks for the help (:

    >using videos taken by my Iphone 4s
    Iphone won't easily edit http://forums.adobe.com/thread/881246
    -and http://forums.adobe.com/thread/1011411?tstart=0
    -and a fix http://forums.adobe.com/thread/934466

  • Importing Script file for speech analysis - error message

    I'd love to get some assistance to get past an error message in Premiere Pro CC, "Matching scene number not found".  However, I've named the scene number and the clip to match, simply as "1".  What am I missing?  NOTE:  the scene is 33 pages long as this is a long speech that I've transcribed and would like to match up to the video clip . . . just in case that is an issue that someone has experienced in the past.  But I'm hoping length of clip isn't a problem (as this is a typical work flow scenario for me).

    Hi,
    Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
    But again it works for the third time..
    Error Message:
    Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
    Please help...

  • Error while importing zip file for second time to B2B through ant script

    [echo] args=import
    importstatus:
    [echo] Commandline arguments 1: [import]
    [echo] Import with overwrite=true
    [echo] B2BCommandLineUtility: importRepository: Error messages:
    [echo] MDS-00521: error while reading document /soa/b2b/tpa_JOvrtiV-7030143
    019445112136.xml from metadata repository
    [echo] MDS-00520: failure to read document /soa/b2b/tpa_JOvrtiV-70301430194
    45112136.xml because it is not in the metadata repository
    [echo] MDS-00911: Document with name "/soa/b2b/tpa_JOvrtiV-7030143019445112
    136.xml" and version 16 does not exist in the repository.
    [echo] ORA-01403: no data found
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
    [echo] ORA-06512: at line 1
    [echo]
    [echo] ORA-01403: no data found
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
    [echo] ORA-06512: at line 1
    [echo]
    [echo] ORA-01403: no data found
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
    [echo] ORA-06512: at line 1
    [echo]
    [echo]
    Can anybody plz help???
    Thanks in Advance!!!

    Hi,
    Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
    But again it works for the third time..
    Error Message:
    Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
    Please help...

  • Error message when opening a Pages Document

    I unintentionally added a .doc extension to a pages document. I erased the .doc extension, and now when I try to open it I get an error message "Import Error, Unknown Error".
    What shoudl I do to be able to open my document?
    Thanks in advance

    When you deleted the .doc extension did you then type in .pages? Otherwise your Mac & Pages won't know it's a Pages document.
    That is assuming is not a Pages document you export as Word & want to change back to Pages.

  • Error message after opening Microsoft Ecosystem Metadata Exchange Powershell Module

    Hi,
    I am running into issue who I launch the Microsoft Ecosystem Metadata Exchange Powershell Module
    Here is the error message:
    Import-Module : Could not load file or assembly 'file:///C:\Program Files (x86)
    \Microsoft Ecosystem Metadata Exchange\MetadataExchange\Microsoft.Telemetry.Met
    adataExchange.Cmdlets.dll' or one of its dependencies. This assembly is built b
    y a runtime newer than the currently loaded runtime and cannot be loaded.
    At line:1 char:14
    + Import-Module <<<<  MetadataExchange
        + CategoryInfo          : NotSpecified: (:) [Import-Module], BadImageForma
       tException
        + FullyQualifiedErrorId : System.BadImageFormatException,Microsoft.PowerSh
       ell.Commands.ImportModuleCommand
    ========================================
    I am wondering what I should do to fix it...
    My OS is win7 x64 sp1
    Thanks,
    Jason

    May have to contact them here.
    http://blogs.msdn.com/b/wer/archive/2012/03/28/windows-hardware-dashboard-reports-faq.aspx#Support
    http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?category=windowsdesktopdev
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Error on importing cimsap.zip

    Hi experts,
    I have upgraded my portal to EP 7 SP 14. I am trying to configure DI. When I try to import cimsap.zip, I am getting following errors. CR_Content.zip is successfully imported. Has anybody faced this problem before? Please help.
    One more thing is I am able to access CMS,CBS, DTR,SLD webguis. but devinf page is not opening. Any clues?
    Regards,
    Mehul
    Error Message:
    Import finished with 73 errors: 906 of 979 objects loaded
    Errors:
    CIM_ERR_FAILED: CIM qualifier Alias is currently not supported by this implementation
    QUALIFIER.DECLARATION Alias
    CIM_ERR_FAILED: CIM qualifier BitMap is currently not supported by this implementation
    QUALIFIER.DECLARATION BitMap
    CIM_ERR_FAILED: CIM qualifier BitValues is currently not supported by this implementation
    QUALIFIER.DECLARATION BitValues
    CIM_ERR_FAILED: CIM qualifier Composition is currently not supported by this implementation
    QUALIFIER.DECLARATION Composition
    CIM_ERR_FAILED: CIM qualifier Counter is currently not supported by this implementation
    QUALIFIER.DECLARATION Counter
    CIM_ERR_FAILED: CIM qualifier Delete is currently not supported by this implementation
    QUALIFIER.DECLARATION Delete
    CIM_ERR_FAILED: CIM qualifier Deprecated is currently not supported by this implementation
    QUALIFIER.DECLARATION Deprecated
    CIM_ERR_FAILED: CIM qualifier DN is currently not supported by this implementation
    QUALIFIER.DECLARATION DN
    CIM_ERR_FAILED: CIM qualifier Expensive is currently not supported by this implementation
    QUALIFIER.DECLARATION Expensive
    CIM_ERR_FAILED: CIM qualifier Experimental is currently not supported by this implementation
    QUALIFIER.DECLARATION Experimental
    CIM_ERR_FAILED: CIM qualifier Gauge is currently not supported by this implementation
    QUALIFIER.DECLARATION Gauge
    CIM_ERR_FAILED: CIM qualifier Ifdeleted is currently not supported by this implementation
    QUALIFIER.DECLARATION Ifdeleted
    CIM_ERR_FAILED: CIM qualifier In is currently not supported by this implementation
    QUALIFIER.DECLARATION In
    CIM_ERR_FAILED: CIM qualifier Invisible is currently not supported by this implementation
    QUALIFIER.DECLARATION Invisible
    CIM_ERR_FAILED: CIM qualifier Large is currently not supported by this implementation
    QUALIFIER.DECLARATION Large
    CIM_ERR_FAILED: CIM qualifier MaxValue is currently not supported by this implementation
    QUALIFIER.DECLARATION MaxValue
    CIM_ERR_FAILED: CIM qualifier MinLen is currently not supported by this implementation
    QUALIFIER.DECLARATION MinLen
    CIM_ERR_FAILED: CIM qualifier MinValue is currently not supported by this implementation
    QUALIFIER.DECLARATION MinValue
    CIM_ERR_FAILED: CIM qualifier Nonlocal is currently not supported by this implementation
    QUALIFIER.DECLARATION Nonlocal
    CIM_ERR_FAILED: CIM qualifier NonlocalType is currently not supported by this implementation
    QUALIFIER.DECLARATION NonlocalType
    CIM_ERR_FAILED: CIM qualifier NullValue is currently not supported by this implementation
    QUALIFIER.DECLARATION NullValue
    CIM_ERR_FAILED: CIM qualifier Octetstring is currently not supported by this implementation
    QUALIFIER.DECLARATION Octetstring
    CIM_ERR_FAILED: CIM qualifier Out is currently not supported by this implementation
    QUALIFIER.DECLARATION Out
    CIM_ERR_FAILED: CIM qualifier PropertyUsage is currently not supported by this implementation
    QUALIFIER.DECLARATION PropertyUsage
    CIM_ERR_FAILED: CIM qualifier Provider is currently not supported by this implementation
    QUALIFIER.DECLARATION Provider
    CIM_ERR_FAILED: CIM qualifier Read is currently not supported by this implementation
    QUALIFIER.DECLARATION Read
    CIM_ERR_FAILED: CIM qualifier Schema is currently not supported by this implementation
    QUALIFIER.DECLARATION Schema
    CIM_ERR_FAILED: CIM qualifier Source is currently not supported by this implementation
    QUALIFIER.DECLARATION Source
    CIM_ERR_FAILED: CIM qualifier SourceType is currently not supported by this implementation
    QUALIFIER.DECLARATION SourceType
    CIM_ERR_FAILED: CIM qualifier Static is currently not supported by this implementation
    QUALIFIER.DECLARATION Static
    CIM_ERR_FAILED: CIM qualifier Syntax is currently not supported by this implementation
    QUALIFIER.DECLARATION Syntax
    CIM_ERR_FAILED: CIM qualifier SyntaxType is currently not supported by this implementation
    QUALIFIER.DECLARATION SyntaxType
    CIM_ERR_FAILED: CIM qualifier Terminal is currently not supported by this implementation
    QUALIFIER.DECLARATION Terminal
    CIM_ERR_FAILED: CIM qualifier TriggerType is currently not supported by this implementation
    QUALIFIER.DECLARATION TriggerType
    CIM_ERR_FAILED: CIM qualifier UnknownValues is currently not supported by this implementation
    QUALIFIER.DECLARATION UnknownValues
    CIM_ERR_FAILED: CIM qualifier UnsupportedValues is currently not supported by this implementation
    QUALIFIER.DECLARATION UnsupportedValues
    CIM_ERR_FAILED: CIM qualifier Write is currently not supported by this implementation
    QUALIFIER.DECLARATION Write
    CIM_ERR_FAILED: Unknown qualifier Deprecated found in property ScheduledStartTime
    CIM_Job
    CIM_ERR_FAILED: Unknown qualifier Write found in property DeleteOnCompletion
    CIM_JobSettingData
    CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_ConcreteJob: CIM_Job
    CIM_ConcreteJob
    CIM_ERR_FAILED: Unknown qualifier Write found in property EnabledDefault
    CIM_EnabledLogicalElement
    CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
    CIM_System
    CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
    CIM_Service
    CIM_ERR_FAILED: Unknown qualifier Gauge found in property AvailableSpace
    CIM_FileSystem
    CIM_ERR_FAILED: Unknown qualifier Deprecated found in property array PowerManagementCapabilities
    CIM_ComputerSystem
    CIM_ERR_FAILED: Unknown qualifier Gauge found in property NumberOfUsers
    CIM_OperatingSystem
    CIM_ERR_FAILED: Unknown qualifier Gauge found in property FileSize
    CIM_LogicalFile
    CIM_ERR_FAILED: Unknown qualifier Deprecated found in property PowerManagementSupported
    CIM_LogicalDevice
    CIM_ERR_FAILED: No such override property in superclass CIM_System: EnabledState
    CIM_ApplicationSystem
    CIM_ERR_FAILED: Unknown qualifier Gauge found in property WorkingSetSize
    CIM_Process
    CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_LogicalPort: CIM_LogicalDevice
    CIM_LogicalPort
    CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_Processor: CIM_LogicalDevice
    CIM_Processor
    CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkAdapter: CIM_LogicalDevice
    CIM_NetworkAdapter
    CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkPort: CIM_LogicalPort
    CIM_NetworkPort
    CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_OSProcess
    CIM_OSProcess
    CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FRUIncludesProduct
    CIM_FRUIncludesProduct
    CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_ProductParentChild
    CIM_ProductParentChild
    CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FileStorage
    CIM_FileStorage
    CIM_ERR_FAILED: Unknown qualifier Deprecated found in class CIM_ProvidesServiceToElement
    CIM_ProvidesServiceToElement
    CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_RunningOS does not exist.
    CIM_RunningOS
    CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_SystemDevice
    CIM_SystemDevice
    CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_BootOSFromFS does not exist.
    CIM_BootOSFromFS
    CIM_ERR_FAILED: Can not decrease MaxLen qualifier from 1,024 to 256 in property SAP_Namespace.Name
    SAP_Namespace
    CIM_ERR_FAILED: Can not decrease MaxLen qualifier from 1,024 to 256 in property SAP_ManagedType.Name
    SAP_ManagedType
    CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterface: CIM_NetworkPort
    SAP_ACENetworkInterface
    CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_JCODestination
    SAP_JCODestination
    CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_MsgServJCODestination
    SAP_MsgServJCODestination
    CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_AppServJCODestination
    SAP_AppServJCODestination
    CIM_ERR_FAILED: Unknown qualifier STATIC found in property AccSldModelVersion2
    SAP_ACEEngine
    CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_ACEAssociatedVirtualizationManager does not exist.
    SAP_ACEAssociatedVirtualizationManager
    CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterfaceComponent: CIM_SystemDevice
    SAP_ACENetworkInterfaceComponent
    CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_HostedACEEngine does not exist.
    SAP_HostedACEEngine
    CIM_ERR_FAILED: Class SAP_ACENetworkInterface referenced by association SAP_ACENetworkToNetworkInterface does not exist.
    SAP_ACENetworkToNetworkInterface

    Hi Mehul,
    try to go to the administration page of the SLD and choose for profile. In here select the option 'objectmanager'. Here set the following settings:
    BufferInstances -> false
    RejectUnsupportedCIMQualifiers -> false
    StrictModifyClassChecks -> false
    after this save the settings and stop and start the SLD from within the SLD itself. Then re-import the CIM model and the contect (so both CIMSAP and the CRdelta).
    This should solve the error messages (I had the same issue before).
    Regards,
    Nico...
    P.S. Please put the question on solved if this solves this issue for you as well to help other people with the same problem.

  • I am getting an error message while replicating the product categories

    Hi SRM Gurus,
    We are presently using SRM 4.0 stand-alone scenario. My client want certain product categories to go for ECS scenario. In the process of journey of configuration. I am stuck with the Product category replication. And I am getting an error message 'Import of material groups into hierarchy HIERARCHY' in the Inbound queue of SRM.
    We have one Hierarchy for local product categories. Do I need to create new Hierarchy for the R/3 Product categories?
    Can you please give me some pointers regarding this?
    Thanks in advance!
    Regards,
    Ram

    Hi Sridhar,
    I did all the confihuration steps for CRM middleware set up. I am replicating only Product categories through T.Code R3AS. When I check in the inbox of SRM through SMQ2, I am getting the error message Import of materail group into hierarchy HIERARCHY. Because we are already using the local product categories for stand-alone scenario. So do i need to create one more hierarchy for the product categories coming from R/3. Or else do I need to configure some settings for that.
    Can you please let me know.
    Thanks and Regards,
    Ram

Maybe you are looking for