Error message in application builder in Build Application.vi

Hello,
I'm trying to make an executable file but I recive the following error message:
Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi->Dist Build LLB Image.vi->Dist Build App Image.vi->Build Application.vi
Possible reason(s):
LabVIEW: The VI is not executable.
Does anyboy know the reason for this message?
Thanks.
Javier de Pablos

Hello Jaime,
I've tried to compile a very simple VI (there is only a while loop that executes nothing and counter is wired to an indicator.
I've attached you.) and I've got the same error. So the code or any dynamic VIs are not the problem.
I've repaired the Application Builder within Control Panel > Add and Remove programs but I haven't resolved the problem.
Javier de Pablos
Attachments:
Untitled.vi ‏13 KB
gg.bld ‏1 KB

Similar Messages

How to fix "server problem" error message when trying to use PhoneGap build service.

I have a site that is now optimized for mobile devices and want to use the PhoneGap Build service in Dreamweaver CS6 to make a native app. Unfortunately, I keep getting the "We seem to be having server problems." error message when I try to create a new project. I did notice that the configuration file was created at the site root. I've seen a few other similar threads on this, but no solution. I've checked on any firewall issues (none) and know that the PhoneGap server is not down. The problem is on my end.
Thanks,
Loren

Not an answer to the server problem, but I have posted the PhoneGap Build process here: http://forums.adobe.com/message/4669054#4669054. It might help anyone still having problems.

Recurring Error Message in Check Project portion of "Build Panel"

Hello, I keep getting the following error message when I check my simple project prior to building it.
My project has two menus and two chapters. It is in SD.
Here is my error message:
Here is how my project looks:
Any thoughts?
Thanks!
Matt

Page 160 in the Encore manual (PDF link below) shows a sample flowchart
What do the links in your flowchart look like?
The individual CS5 pages also have links to the CS4 user guide pages
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

[WHLK] The error message pops up while installing WHLK build 10022/10031 on Server 2012

Hi all,
There is no error message on WHLK build #9926.
But the error message pops up on installing build 10022/10031.
Did you get the same problem while installing WHLK build 10022/10031?
Here is the s=installion step:
Launch "HLKSetup.exe" on Server 2012 -->The kit will ask the user th find "HLKSetup.exe" in download folder-->
Launch HLKSetup.exe" in download folder-->The error message pops up when the process bar goes to 38%
Error message
Problem signature:
Problem Event Name: APPCRASH
Application Name: Microsoft.Windows.Kits.Hardware.Setup.UpdateControllerDb.exe
Application Version: 10.0.10031.0
Application Timestamp: 54f420f2
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.2.9200.16384
Fault Module Timestamp: 5010ab2d
Exception Code: e0434352
Exception Offset: 00000000000189cc
OS Version: 6.2.9200.2.0.0.400.8
Locale ID: 1033
Additional Information 1: d522
Additional Information 2: d5228251694f130212c01ab1b52ad2a6
Additional Information 3: f9b9
Additional Information 4: f9b95021280f20538cd74ca111eba02c
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=190175
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

This is not the correct support channel for pre-release products, please follow-up with the channel in which you received this product for support or read the release notes for the product which will supply the correct steps to follow to avoid this situation.

Ecatt error messages in Log while implementing Solution Builder

Hi all,
We are implementing SAP Best Practices using Solution Builder. During the solution builder set up, there is a step where we have to "Upload Installation Data". As per the step, i have downloaded the required BP_CRM_V1_2007_Installation_Data.zip file, unzipped it and uploading it from here. But its resulting in an error, and the log says something about ECATT/BCSET Objects. Has anyone faced a similar problem? Any help would be appreciated. Thank you.
Regards,
Padma Guda

Hi Padma,
could you breif the problem statement?
Regards,
Venky

Why do I get the following error message when trying to use Report Builder in sql server 2012?

sukai

Hi sukai,
The issue is due to one or more of the files listed in the application manifest cannot be found on the server. We can upload all the deployment’s dependents files, and try again. And frequently this means that the application is somehow corrupted, or that
the ClickOnce store is corrupted. Please refer to the following thread to fix the issue.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/47c9f7c6-00ed-4980-9667-5c176ad7116a/ssrs-report-builder-application-cannot-be-started-contact-application-vendor
According to your screenshot, you are using Chrome. Please use IE browser try it again. SSRS not all report functionality is supported by all browsers. Please refer to the similar thread below:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ef9cb3f2-2acd-4947-b1fe-4724c51c61a2/unable-to-start-report-builder?forum=sqlreportingservices
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to resolve error message 'Windows 7 Build 7601 This copy of Windows is not genuine'

Hi
I have the following error message on my computer 'Windows 7 Build 7601 This copy of Windows is not genuine'
I have already spoken to a HP expert via telephone, and they aked me to continuously press the F11 button whilst switching on my laptop (Pavillion dm1)
It says I should see a grey bar with the text Windows is loading files on a blue screen however this does not come up on my screen.
Please can you help.
Many thanks

Try the steps in the following weblink/Video:
http://www.youtube.com/watch?v=NmBYK-vwCfI
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Sending job error message to admin by email

Hi everyone...
Anyone knows how to send job error message to admin by email? For example, if crawler failed, an email is sent to admin with the error message. I'm thinking of building windows service which run at the background and knows when a job fail and send the error message through email to admin.
Is there a better way?
Cheers,
Jefi Santoso

hi,
>>>Can this be achieved through BPM?
yes you can put your transformation step
and send step in a block and specify an exception
branch and catch all exceptions that will
occur during transformations and the send step
then you can send info from the exception branch to
any other system
you won't be able to catch the error's name
but you will be able to notify any thinrd party
about the error
more on error catching:
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
Regards,
michal

SQL*PLUS WINDOW DOESNT GIVE AN ERROR MESSAGE.

HI,
i FOUND OUT THAT IF I HAD AN ERROR IN MY SQL SCRIPT, THE WINDOW WILL DISAPPEAR AND LOST EVERYTHING THAT I HAVE DONE. IT DOESNT GIVE ME AN ERROR MESSAGE. IM HERE IN CHAP05, BUILDING A RELATIONAL SCHEMA OF ORACLE DATABASE 10G EXPRESS EDITION FOR LINUX. WHAT PARAMETER AM I MISSING IN MY SYSTEM? PLS. HELP ME. THANKS.
LEN

Hi,
Most likely you have to adjust WHENEVER SQLERROR and (or) WHENEVER OSERROR settings.
Consider an example below:
C:\> sqlplus /NOLOG
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Nov 1 02:55:29 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn max
Enter password:
Connected.
SQL>
SQL> whenever sqlerror continue
SQL>
SQL> exec raise_application_error(-20000, 'Error')
BEGIN raise_application_error(-20000, 'Error'); END;
ERROR at line 1:
ORA-20000: Error
ORA-06512: at line 1
SQL> whenever sqlerror exit
SQL>
SQL> exec raise_application_error(-20000, 'Error')
BEGIN raise_application_error(-20000, 'Error'); END;
ERROR at line 1:
ORA-20000: Error
ORA-06512: at line 1
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, Oracle Label Security, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
C:\>As you can see, with WHENEVER SQLERROR set to EXIT, SQL*Plus session terminates as it encounters any program error.
Similarly, for OSERROR setting:
C:\> sqlplus /NOLOG
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Nov 1 02:57:08 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn max
Enter password:
Connected.
SQL>
SQL> start C:\non_existent_file
SP2-0310: unable to open file "C:\non_existent_file.sql"
SQL>
SQL> whenever oserror exit
SQL>
SQL> start C:\non_existent_file
O/S Message: No such file or directory
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, Oracle Label Security, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
C:\>Hope this helps.

Populating error message schema

I have an error handling orchestration that pulls error messages as an XML Document via a direct bound port. I pull certain information off of the ErrorReport object and store that info in orchestration variables. I have the table schema that was set up
for inserting the records into my SQL Server table. How do I map my variable information to the table schema? I created an "error message schema", but how do I build that message from my variables? How do I populate it with my variables so that I
can map it to my generated table schema? I'm just not clear about this step.
Thanks.
Raymond

Thanks for the input guys. here is what I have. I'll try to be brief.
I have a schema I designed called ErrorMsg. Here is what an instance of that schema looks like"
<ns0:ErrorMsg xmlns:ns0="http://ExOrchestrations.ErrorMsg">
<FileName>FileName_0</FileName>
<PartyName>PartyName_0</PartyName>
<SequenceNumber>SequenceNumber_0</SequenceNumber>
<ProcessingServer>ProcessingServer_0</ProcessingServer>
<MessageID>MessageID_0</MessageID>
<FailureTime>FailureTime_0</FailureTime>
<ReceivePortName>ReceivePortName_0</ReceivePortName>
<ErrorText>ErrorText_0</ErrorText>
</ns0:ErrorMsg>
I have defined a message called ErrorValues. It is of type ErrorMsg
Inside a construct Message shape I have chosen ErrorValues as the message to be constructed. I also have the the following code in a message assignment shape:
var_XmlDocument = new System.Xml.XmlDocument();
var_XmlDocument.LoadXml(
"<ns0:ErrorMsg xmlns:ns0='http://ExOrchestrations.ErrorMsg'>"
+ "<FileName>" + var_FileName + "</FileName>"
+ "<PartyName>" + var_PartyName + "</PartyName>"
+ "<SequenceNumber>" + var_SequenceNumber + "</SequenceNumber>"
+ "<ProcessingServer>" + var_ProcessingServer + "</ProcessingServer>"
+ "<MessageID>" + var_MessageID + "</MessageID>"
+ "<FailureTime>" + var_FailureTime + "</FailureTime>"
+ "<ReceivePortName>" + var_ReceivePortName + "</ReceivePortName>"
+ "<ErrorText>" + var_ErrorText + "</ErrorText>"
+ "</ns0:ErrorMsg>"
ErrorValues = var_XmlDocument;
When I compile I get the following error msg:
'ErrorValues': message has not been initialized in construct statement
I know I'm probably missing something simple.
Thanks.

Error message on 1242 WAP

I am trying to make a simple configuration change on an AIR-AP1242AG-A-K9 wireless access point. When I try to save the change using the "copy run start" or "write mem" command I get the following error message after the unit trys to build the configuration. Here is my complete string of commands.
A01#copy run start
Destination filename [startup-config]?
Building configuration...
Error writing new config file "flash:/config.txt.new"
nv_done: unable to open "flash:/config.txt.new"
Error writing new block-fs file "flash:/private-multiple-fs.new"[OK]
The configuration change does appear in the run config but does not save to the startup config.

Dan,
You are terrific!!!. I have 20+ crash files in the flash directory so I deleted 2 of them and tried to save my configuration changes just see what would happened and it worked. I suppose it is a good idea to remove the rest of the crash files however, part of the reason I am doing what I am doing is because I am preparing to upgrade these units to LWAPP. Will these files get wiped out when I do the conversion or will they be in the way of the conversion? No sense in going to all the work of deleting the files if they are going to get wiped out anyway. Yet, if they are taking up space that is needed in the conversion process then I'll do what I have to do.
Bob Ibach
Telecommunications Services
Western Washington University
360-650-6812
[email protected]

Getting error message when i try to burn my DVD when i am done authoring

error message says "Unsuccessful. Not enough space on media output device" I have been DVD SP 3 for years and have never gotten that message. The size of the project is under 2gigs, so the blank dvd is plenty big enough. Anyone ever get that error message?
Thanks, Stone

I don't think that's the problem, Shawn. Stone, I think the problem may be your hard drive. You apparently don't have enough free space for the build. Since DVD Studio Pro needs to "build" the project before burning it to DVD, the "output device" error message is probably referring to the build location (i.e. your hard drive) rather than the blank DVD. Either clear out some stuff on your hard drive, or find a different partition or drive that has more free space.

Executable build failing with no error message with smtp email VIs

I have a VI which I want to build into a .exe which will be used as an HMI for a real-time system. I am using the SMTP VIs to text/email me various notifications about the system state. The main VI works fine if run but will not build into an .exe. The error message comes back blank so no help there (LabView 2010). If I just simply disable the portion of the code in the HMI.VI which contains the email VI code, the application builds. I searched for anwers and was unable to resolve the problem. Any ideas? Do I need to include anything in the build that is specific to the LabView SMTP VIs? I'm new to building .exe's so I appologize for any rookie mistakes I may have made.
Thanks.

mikeporter wrote:
You said you searched for answers (on the forum?).
Yes.
What did you find?
I found a bunch of topics on email send errors after the application was built but nothing related to .exe building failures (related to the SMTP/email VIs). I also found topics dicussing the bug that fails to report an (any) error during the .exe build (for 2011). The solution was to install the service pack. if that's my problem then I will have to go through the motions to get that done (corporate computers / lack of persmissons and such).
What have you tried? This question has been answered many, many, many times.
I tried what I stated in the OP. If I disable the portion of the code which contains the email SMTP VIs, the application builds, otherwise, the build fails and no error code or description is given.
PS: probably has nothing to do with the SMTP drivers, per se.
If the answer has been given many, many times, then I appologize for not being able to find it before posting. Trust me, the last thing I want to is waste my time fishing for answers on the forum, especially when I get a response from forum members who would rather point out that my mis-identified problem has been answered many, many times, rather then just helping me out.

Getting "layer break" error message when trying to Preview a single sided DVD, or build an ISO image or disk folder

Hi! Hoping someone might be able to help with an odd problem. I haven't found anything in the forums or the web that match my symptoms.
I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that. I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop. I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements. To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project). This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD. But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message. I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
I typically build both DVD and Blu-Ray images from the same material in the same project. I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built). And as I mentioned before, this is the first project on which I've even seen this layer break message.
Any suggestions would be greatly appreciated! I'd rather not recreate the project from scratch, but I'm worried that I may have to.
Thanks
Jon

The total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
Be sure you "run as administrator" for dual layer projects.
Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
Also see these posts:
Neil Wilkes
http://forums.adobe.com/message/3466255#3466255
Neil Wilkes
http://forums.adobe.com/message/4054265#4054265
Neil Wilkes
http://forums.adobe.com/message/4054269#4054269
Jon Geddes
http://forums.adobe.com/message/4002647#4002647
shuchi shrivastava
http://forums.adobe.com/message/3905911#3905911
Jon Geddes and Neil Wilkes
http://forums.adobe.com/message/4003221#4003221

When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build"

When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?

I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11 itunes v. 9.0 and I just want it to be restored. I need help. Oh and its an 8 gb ipod touch.

Error message in applicatio​n builder in Build Applicatio​n.vi

Similar Messages

Maybe you are looking for

Error message in application builder in Build Application.vi