Error message in Bex after I make display attribute navigational

Hello,
Regarding 0FIAR_C03. There's a display attribute called "Customer Classification". I made it navigational and re-activated the cube. Thereafter, the existing queries on this cube display the following error message when I try to edit them:
1) Variable 0P_KEYD2 for characteristic Posting Date has been converted to a required entry.
2) Variable 0P_KEYD3 for characteristic Clearing has been converted to a required entry.
Does anyone understand what this means and how I can resolve it?
Thank you,
Jim

Hello Bhanu,
Yes, I can edit the query after seeing these messages.
I also received an error message within the RSA1 after I turned on the Navigational Attribute, but it seemed like more of a warning than an error message, so I was not concerned....until I ran into this error immediately upon going into Bex.
In my past experiences, I never had an issues after making something navigational, but this seems to be related to that change....
Thank you.

Similar Messages

I received an error message; We have detected an incompatible display driver.

I received an error message; We have detected an incompatible display driver. All my display drivers are up to date. How can I find out which display driver is not compatiable? How can I fix this issue?

oleg_skriabin
Did you realize that you posted in a 2 year old thread?
What version of Premiere Elements do you have and on what computer operating system is it running?
Are you having a problem with the following error message?
We have detected an incompatible display driver--please update
If so, you might want to start your own new thread on your specific issue in your specific computer environment, including
details.
Have not seen the above error message respond to your suggestion
Try to make your monitor screen resolution higher
so it will interesting to learn of the details of your situation.
ATR

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

Are you trying to update via wifi or connected to your computer?
 Cheers, Tom

What do I do with this error message: To use this library, make sure its file permissions are set correctly.

So I cannot even access the application. It was working fine yesterday and today I get this error message:
To use this library, make sure its file permissions are set correctly.
I have changed nothing. All the pictures are there on the computer. Help?!

Reboot. Close any programs which open at start-up. Run Disk Utility (you can type this in the Spotlight search field at the right end of your Menubar).
In Disk Utility, select your drive from the list on the left, and click "Repair Disk Permissions". This will take a few minutes, but should be less than ten.
Reboot.
Try to open your Library in Aperture. What happens?

I RECEIVED AN ERROR MESSAGE THAT I COULD NOT MAKE OR RECEIVE CALLS AND I HAD TO RESTORE VIA ITUNES. I HAVE DONE SO AND LOST LOADS OF APPS ETC (MY FAULT FOR NOTBACKING UP) BUT STILL UNABLE TO MAKE OR RECEIVE CALLS.

Phone is only a few months old and was working fine last night - it ran out of battery but on being charged up this morning it was effectively locked. I received an error message that I could not make or receive calls and I had to restore via itunes. I have done so and lost loads of apps etc (my fault for not backing up) but still unable to make or receive calls. Anyone had anything similar and can advise who I should contact or what I can do.
Thanks,

try contacting your carrier and see whats going on.

Error Message concerning template after starting the application

Hi all,
I just developed a WebDynpro Application in which a Adobe Form is used in one view.
After deploying and starting the application I am expecting, that the view with its adobe form is displayed.
Unfortunately I am getting, the following error message:
<b>com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: IOException occured while creating template stream from the TemplateSource : ./temp/webdynpro/blablabla.Adstest2/Adstest2View_InteractiveForm.xdp (No such file or directory)</b>
Does anybody know how to solve this problem?
Thank you in advance.
Best regards, Patrick.

Hi Patrick,
Make sure ADS is configured properly on server & credentials are installed on ur server.Check whether pdfSource is available .It looks like a configuration problem bcos xdp file get generated automatically with adobe form.
regards
Sumit

ITunes error messages while syncing after 0SX 10.6.6 update

After installing the recent OSX 10.6.6 update, I am receiving the following error messages in iTunes when trying to sync both my iPhone 4 and my 1st generation Apple TV:
iPhone error message:
"The iPhone cannot be synced. The disk could not be read from or written to."
Apple TV error message:
"iTunes cannot sync photos to the Apple TV because of a problem on your computer. The disk could not be read from or written to."
I'm not sure if this matters - but in the iPhone error message - it does not state if the "disk" is the iPhone or the computer - but in the Apple TV error message it does make this distinction, saying that the problem is on my computer and specifically mentions photos.
Now, once I dismiss either of the error messages, the sync progresses normally and completes successfully. Also, I have checked my computer (MacPro) and all diagnostics (including the internal hard drives) pass with flying colors. And the computer is working fine otherwise - so I have no reason to believe that there is a hardware problem with the computer. And I would find it very strange that I would have a hardware problem with both my iPhone and Apple TV appearing at the exact same time. And finally, both the iPhone and Apple TV are performing normally when in use.
Since this problem did not start until after running the 10.6.6 update - logic tells me that is where the problem probably lies.... the question is how to resolve it - anyone have any ideas?

Both those symptoms are consistent with a damaged photo cache. If you remove your existing photo cache as per the instructions in the following document, does that get you past the error?
[iTunes: Photo sync creates iPod Photo Cache folder|http://support.apple.com/kb/TS1314]

Error Message: EventType : BEX P1 : iTunes.exe --- iTunes Crashes!!

Hi,
Please help with this seemingly unfixable issue:
When I go to synch my iPod (30 GB/Video), iTunes crashes and shutsdown and I get an error message with this this string:
EventType : BEX P1 : iTunes.exe P2 : 9.2.0.61 P3 : 4c18061b
P4 : iTunes.dll P5 : 9.2.0.61 P6 : 4c1805f8 P7 : 0004be7e
P8 : c0000409 P9 : 00000000
My attempts to fix have been, and none of these worked:
1. Run FULL Virus Scan
2. Run FULL Adaware Scan
3. Run FULL Malwarebytes' Anti-Malware Scan
4. Apple Tech Suppor Recommended I uninstall (in this order) iTunes, QuickTime, Apple Software Update, Apple Mobile Service, Bonjour, Application to Apple Support. After this I went in to my Registery and deleted any iTunes/iPod/Apple files. I did the same in Windows Explorer (Application Data and Program Files). I also did a Registery scan (Uniblue Reg. Cleaner Software).
5. Shutting down all programs running.
6. "Restoring" my iPod
When I start to synch my iPod after about 100 songs an (Windows) iTunes Error message pops up and crashes.
Please help if you can and if you actually know how to fix this!
Al thanks!!
Steven
I went to open up the ref. file FYI and a lot computer language showed up including (if this is important)
EXE NAME="kernel32.dll" FILTER="GRABMIFILTERTHISFILEONLY">
<MATCHING_FILE NAME="kernel32.dll" SIZE="989696" CHECKSUM="0x2D998938" BINFILEVERSION="5.1.2600.5781" BINPRODUCTVERSION="5.1.2600.5781" PRODUCT_VERSION="5.1.2600.5781" FILE_DESCRIPTION="Windows NT BASE API Client DLL" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft® Windows® Operating System" FILE_VERSION="5.1.2600.5781 (xpspsp3gdr.090321-1317)" ORIGINAL_FILENAME="kernel32" INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft Corporation. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xFE572" LINKER_VERSION="0x50001" UPTOBIN_FILEVERSION="5.1.2600.5781" UPTOBIN_PRODUCTVERSION="5.1.2600.5781" LINK_DATE="03/21/2009 14:06:58" UPTOLINKDATE="03/21/2009 14:06:58" VER_LANGUAGE="English (United States) [0x409]" />

Hi,
I thought I would hijack the thread since the OP seems to have gone missing, and I'm having the same issue, and have taken the same steps to correct it - to no avail.
Itunes does NOT appear to be crashing at the same song/album. Rather, when I connect my ipod Video, it crashes before it can even begin syncing. Any help would be greatly appreciated.

Error message during BEx analyzer execute

Using BEx analyzer, system show error message like below:
Variable 0P_FVAEX could not be replaced;
Program error in class SAPMSSY1 mehtod: UNCAUGHT_EXCEPTION
System error in program CL_RSR_REQUEST and form TEXT_ELEMENTS_GET:VARIABLES_SUBMIT(see long text)
Who can solve this problem? Thanks!
Message was edited by:
Almini Sanbra

Dear sanbra,
We have faced the same error and its resolved after applying the
Following:
I have applied the following Note
1079186 Error when you filter by characteristic values
Please also apply the following patches to your system:
Support packages and patches ->SAP netweaver->SAP Netweaver->
SAP Net weaver 2004s->Entry by component->BI java
Update with the latest patches
1)BIBASES12P_4-10003477.SCA Patch for for BI BASE SERVICES 7.00 SP12 4
2)BIWEBAPP12P_4-10003476.SCA Patch for BI WEB APPLICATIONS 7.00 SP12 4
3)BIIBC12_0-10003495.SCA SP for BI INFORM. BROADCASTING 7.00 0
Regards,
Suman Raju.
***********IF useful some points please***********

Error message in WebGUI after adding fields with EEWB - Class doesn't exist

Hello!
After adding fields to the component BT111H_OPPT within EEWB and BSP_WD_CMPWB I recieved an error message while trying to open an Opportunity in the WebGUI, stating:
Cannot display view MainWindow
An exception has occured
Exception Class CX_SY_DYN_ILLEGAL_CLASS - Method call of IF_BSP_WD_DYN_RT_REP_SUPPORT~GET_URL_PARAMETERS failed; the class ZL_BT111H_O_BSPWDCOMPONEN_IMPL does not exist
Method: CL_BSP_WD_COMPONENT_FACTORY=>GET_REPOSITORY_XML
Source text Row:25
An exception occured during the activation of target view CUBTOpptOverview.MainWindow for the navigation
An exception has occured
Exceptions Class CX_BSP_WD_RUNTIME_ERROR - View CUBTOpptOverview.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source text Row:162
Has any one an idea, if this could be a bug or what went wrong? I am especially irritated, that it seems, that class was not created. After all I never changed any tables or anything in the background manually. I just used the standard tool EEWB, nothing else.
Many thanks for any kind of help!
By the way, I tried to go back all the steps I took previously to, kind of "un-do" my error, but I was not able to delete all created extensions, due to a another error - but that's a different story, or isn't it?
Cheers,
Marek

Hello Experts,
I know my question was a tricky one and no-one was able to help me from this forum. That's why I would like to share with you the solution I just recieved from SAP:
Although all classes that were created whilst extending the component BT111H_OPPT were deleted, there still existed a seperate extension definition in ViewCluster BSPWDVC_CMP_EXT still persisted.
I wasn't aware of the fact, that I had to delete that too.
Note: in order to delete ViewCluster, use tx SM34
The problem ist now solved!
Cheers!
Marek

"IWD Bus Enumerator disabled" error message in LSC after Windows 8.1 upgrade

Hi there,
I just upgraded my T430 from Windows 8 64-bit to Windows 8.1 64-bit.
After restart, LSC shows an "IWD Bus Enumerator disabled" error message. I went to the device manager, right clicked on IWD Bus Enumerator and selected the "update driver software" option. Message came back that the latest driver is already installed. By the way, in the device manager there are two lines "IWD Bus Enumerator", where the first line is normal (i.e., enabled), and the second line shows that error message (yellow triangle).
What next? Any ideas? My laptop seems to work fine, otherwise.
Best,
Sven
Solved!
Go to Solution.

I resolved my issue by going to device manager and selecting View Hidden Devices - then expand System Devices
In my case there were 2 listings for IWD BUS ENUMERATOR - one had the yellow triangle - I uninstalled that one and restarted my laptop and the message was gone. If that does not work make sure you get the latest drivers from Lenovo and also visit Intel.com and search for WiDi - they have some programs to check drivers.

Configuring error message in BEx link in SPM 2.1

Hi,
Currently working on Spend Performance Management(SPM) 2.1 application. I am trying to configure error message which pops up along with BEx link whenever we run reports with large amount of data.
I would like to configure error message so that it displays "Large data in report", hence user find it easier to understand why he is being given BEx link.
Please guide me on this.
Regards,
Deeraj.

Hi ,
As suggested above , you'd have to remove content creator role if your user profile has it .
When you go to
- application properties > General > Warning mesg for large reports(field) and
- change the default message ,
- hit save logout of the application ,
- log back in
- go back to application properties > General > Warning mesg for large reports(field) and
Do you see the message you had entered in step 2 above?

How do you clear Error Message 3100? After installing the New inks, On NEW 'Canon MX432' Printer

Have NEW ‘Canon MX432’, (1)-followed the instructions to set language without problem, next step, checked for the Set ink cartridge Message, (2)-and then opened the Paper Output Tray and the Paper Output Cover.
On the second try; (3)-the Head Cover opened automatically, (4)-then lowered the Color Ink Cartridge Lever, (5)-Unpacked the FINE Cartridge and remove the protective tape, (6)-then Inserted the FINE Cartridge straight in until it stopped, (7)-and lifted the Color Ink Cartridge Lever.
Next did the same steps (8) - (9) - (10)- (11)-to the Black Cartridge, next (12)-Closed the Paper Output Cover.
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer, (14)-got error Message; ”Printer Error occurred”, then the numbers; “5100”.
Have tried unplugging the printer a few minutes and repeating the steps from the start to no avail.
Next will go buy new Ink and try again or return this Canon MX432 Printer, for a different Model.
Do not want to install new Ink Color and Black Cartridges until I understand the problem solution.
Have used Canon products for over 30 years never had this problem or any problems with their products which could not be resolved by me.
Steps Followed:
*** Do you see a problem with these steps taken? ***
(1)- Set language
Waited for the “Set ink cartridge” Message
(2)- Opened the Paper Output Tray and the Paper Output Cover
(3)-The Head Cover opened automatically
(4)-Lowered the Color Ink Cartridge Lever
(5)-Unpacked the Color FINE Cartridge and remove the protective tape
(6)-Inserted the FINE Cartridge straight in until it stopped
(7)-Lifted the Color Ink Cartridge Lever
(8)-Lowered the Black Ink Cartridge Lever on the left
(9)-Unpacked the Black FINE Cartridge and remove the protective tape
(10)-Inserted the Black FINE Cartridge straight in until it stopped
(11)-Lifted the Color Ink Cartridge Lever
(13)-Closed the Paper Output Cover
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer
(14)-Got error Message: ”Printer Error occurred”, then the numbers; “5100”

Hi Anselmo_MSW!
It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time.
The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:
1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
2. Make sure all ink tanks are seated properly.
3. Make sure all packing materials have been removed.
4. Make sure no paper is jammed in the printer.
5. Disconnect the printer cable from the printer.
6. Close the front cover and turn the printer off.
7. Unplug the printer from the power source, and then plug it back in after five minutes.
8. Power on the printer.
If the error returns, the printer will require service options. I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers. What I would recommend is contacting a Canon Representative using the following link to learn of your service options. Contact Us.

Error message for 0CURRECY after DTP

During transformation we made a formula for KF call Price, the formula price is equal to gross sales volume/Quantity sold. After DTP we found error message, and the data for all price was 0, that means the formula that we set during trasformation was not worked
Message Text: No SID found for value 'PC' of characteristic 0CURRENCY
ID:BRAIN
NO:70
Diagnosis
     Characteristic value PC does not exist in the master data table of
     characteristic 0CURRENCY . Therefore, this value could not be
     transformed into the internal SID.
System Response
Procedure
     Check whether the value is correct or not. If it is correct, you need to
     generate the associated master data. Note: For characteristics
     0FISCVARNT , 0FISCPER and 0FISCYEAR, there must be a corresponding
     fiscal year variant (see table T009). In addition, there must be units
     in table The value for 0FISCPER must be valid according to the fiscal
     year variants. This means that only the periods 0 to (no. of normal
     periods + special periods) are allowed. If the fiscal year variant is
     year-dependent, then only the periods defined for the corresponding year
     are valid. You can make these settings in Customizing in the activity
     Maintain Fiscal Year Variant . T006 and currencies in table TCURC. Also
     note that the units must be of
     Units that refer to 0UNIT must be available in table T006, and
     currencies that refer to 0CURRENCY in table TCURC. Note that the units
     must be available in internal format. Owing to the presence of a
     conversion exit in field MSEHI of table T006, you are only able to see
     the internal format if you deactivate this exit. ( Settings > User
     Parameters > Tab DataBrowser > Consider Conversion exit must not be
     set). Also take a look at note no. 619987.
Procedure for System Administration

Solution already mentioned in the OSS note -Note 619987 - No SID for the 0UNIT or 0CURRENCY characteristic
did you find the value - "PC" in the T006 or TCURC table ,if not you must insert it.
If you have and still get the error ,You can eliminate this inconsistency by calling the RSDMD_INITIAL_LINE_INSERT function module with I_CHABASNM = 0UNIT or 0CURRENCY.
If units are loaded in the external format, you must either convert these into the internal format in the transfer or update rules or change the extractor/file.The CONVERSION_EXIT_CUNIT_INPUT function module converts the external value of a unit into the internal value.
Hope it Helps
Chetan
@CP..

Getting error messages upon startup after installing Lab View 5.1.1.

I have recently purchased a DAQ system along with a computer, which uses a readout program written in Lab View. however, after installing Lab View 5.1.1 on this same system, I started getting some error messages and the readout program no longer works. Here are the error messages:
"The \SystemRoot\system32\drivers\nidmmk.dll device driver could not locate the entry point ?single PointWrite@mdsSimpleDIGPortPrimitive@@UAEXKKKAAJ@Z in driver Nidaq32K.sys"
as well as
"The ordinal 2011 could not be located in the dynamic link library nidaq32.dll. An error occurred while loading VT Digital buffer write.vi"
I would greatly appreciate any help I can get.

Hello,
Installing LabVIEW should not effect an installation of NI-DAQ. However, it seems to me that we may have installed a different version of NI-DAQ on top of the current version. This is very possible because the old LabVIEW CD�s contain NI-DAQ on them.
In this case, there is not an easy solution, we could try uninstalling and reinstalling combinations, but it will probably save the most time and effort to uninstall all National Instruments products and reinstall them. The best way to do so is from the ADD or REMOVE Programs utility from the Control Panel. Then we want to remove the following registry keys (BE SURE TO BACKUP YOUR REGISTRY!!)
HKEY_CURRENT_USER\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and delete registry entries containing any keys with 1093 in them.
Do not worry if any of these trees are not listed. If you have Administrative rights, and you still cannot delete these keys, that is also OK. Continue with the remainder of the process.
Make sure that you do not have any of your own VIs or other files saved in the "C:\VXIpnp", "C:\Program Files\National Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a different location. If you are concerned about keeping old virtual channels and your SCXI setup intact, then backup the "C:\WINDOWS\niconfig.daq" file, too. Delete all folders and files mentioned above.
Note: If you have Windows NT/2000, replace "C:\Windows" with "C:\WINNT" in the paths listed above.
Once these steps are taken care of, we should have clean system. You probably want to reboot and then reinstall the software. You should install development environments first, and then install drivers.
Just let us know if this does not take care of the problem, or if you have any questions on how to complete a step of the process.
Best regards,
Justin T.
National Instruments
NOTE: Turning off virus scan programs greatly increases the speed of uninstalling and reinstalling.

Error message in Bex after I make display attribute navigational

Similar Messages

Maybe you are looking for