Error message in "Check Solution Manager"

I'm running SolMan EHP1 SP6. The BI repository and Solution Manager are running on the same box. The BI repository is loaded in client 001. The System SID is PS4.
I'm performing the "Diagnostic Self Check" in Root Cause Analysis. When I select the "Check Solution Manager" button I'm getting an error message
Text = BI Setup check 'MYSELF_DEST' failed - Reason: ;Incorrect client 300; use BI client 001
Action = The CCMSBISETUP job was not completed successfully. Please run CCMSBISETUP again from the transaction solman_admin and/or adjust the corresponding BI objects in RSA1 if necessary.
In RSA1 the source system is defined as PS4CLNT001. So I'm not sure what the problem is.
It is my understanding that I can configure CCMSBISETUP in solman_workcenter by selecting "System Monitoring", then Setup, then Configure IT Performance Reporting. When I do this the default value for RFC destination from Solution Manager to BI: is set to NONE
The system requires and entry for the RFC destination from BI to Solution Manager - Does anybody know what RFC destination belongs here?

Hi,
The CCMSBISETUP job was not completed successfully. Please run
CCMSBISETUP again from the transaction solman_admin and/or adjust the
corresponding BI objects in RSA1 if necessary.
Alternatively, please perform again Initial and Basic configuration
for SolMan by running transaction solman_setup. This should solve the
issue.
Notice that you must have the latest version (13) of SAP Note 1405878
applied in the solution manager system.
Hope this helps.
Cheers
SH

Similar Messages

I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time .

Trying to activate FaceTime and/or iMessage, I get an error message. Any solutions?

Attempting to activate FaceTime or iMessage on my iMac, I'm getting error message. Any solutions?

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait for it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

Error message while check or save

Hi,
Case1
We are getting the error message while check or save
PO, "no vendor Specified".
Case2
Refernce to SDN solution, Maintained text inplace of no vendor specified messgae no 00 and class 001, &1&2&3&4&5&6&7&8.
Now Iam getting the error message &1&2&3&4&5&6&7&8.in place of No Vendor specified.
Please let me know how to resolve this issue.
Thanks
Nagaraj K

Hi,
We are maintained vendor master, company code and Purchase organation level.
We are created more than 5 nos vendor for testing and we are through with the vendor master setting.
We are able process RFQ,Contract documents but we are getting this error messge while check or saving the PO.
Thanks you very much for your folowup.
Thanks
Nagaraj K

We are unable to sign in to iMessages, wifi connection is fine but we get the error message, pls check your network connection

we are unable to sign in to iMessages, wifi connection is fine but we get the error message, pls check your network connection. Does anyone know how to fix this

there has been a big problem with facetime and imessage. The best solution for this case is to restore your device http://support.apple.com/kb/HT1414
Make sure you back it up. and I would set up facetime before you reinstall your backup and make sure its working.

Error in RFC & to Solution Manager System

Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder

FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.

Error in Installation of Solution Manager on Virtualbox centOS

Error in Installation of Solution Manager on Virtualbox centOS .
I tried as per the solution given in the error.
Please go through attachment for error and my /etc/hosts file.

Hi,
I guess you added the entry in /etc/hosts after you got the error.
That being true, stop and start your sapinst again. This will allow you to continue. The information is cached and the only way is to stop and start sapinst.
Cheers,
Amerjit

How to resolve a "The Extension Package is invalid."error message in Adobe Extension Manager CS5,6

How to resolve a "The Extension Package is invalid.error message in Adobe Extension Manager CS5,6

I'm using Windows XP Professional sp3.I've tried to install(unfortunately,to no effect,till now)Layers Control by Vadim Chtcherbakov ,Floating Adj by David Barranca,Photoshop Blending Modes by Rufus Deuchler,and The Fader by Capture Monkey.The Adobe Extension Managers I have installed in my PC are 5.0.1 for CS5,and 6.0.8 for CS6...Thanks in advance for your consultation!

TS2516 an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

This user talked to Apple Support personnel and confirms what Larry is suggesting:
crowland1066
Re: book upload fails
Nov 30, 2013 3:02 PM (in response to pablo123)
Just got off the phone with apple support. If the photo book completes the assembly process but fails during the upload process the problem is in their overloaded servers.They just started a free shipping promotion for the holidays which has increased the traffic dramatically. I bought a calendar a week ago and it went right through. I'm going to try again during less peak times.
Happy Holidays

I got errors while installation of solution manager 4.0 sr2

I faced the errors below while installing Solution Manager 4.0 sr2.
How can I solve these problems?
Thanks.
ERROR 2007-03-13 17:30:12
FSL-00001 System call failed. Error 13 (Permission denied) in execution of system call 'openU' with parameter (/opt/cdler/CD2/IM_HPUX_PARISC/COMMON/INSTALL/JDBCCONNECT.JAR, O_RDONLY), line (368) in file (syuxcfile.cpp).
ERROR 2007-03-13 17:30:12
FSL-02015 Node /opt/cdler/CD2/IM_HPUX_PARISC/COMMON/INSTALL/JDBCCONNECT.JAR does not exist.
ERROR 2007-03-13 17:30:12
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-03-13 17:30:12
FCO-00011 The step copyScripts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Unpack|ind|ind|ind|ind|8|0|copyScripts was executed with status ERROR .

Hello Cemil,
The errors you are recieving are most likely user or permissions
related.
Can you please verify that there are 777 permissions on the
installation directories? Also are you installing as User Root?
Are you installing from an NFS Mount or network drive? If so it could be
possible that the user does not have enough permissions on this. If
so I recommend copying the installation files to a local directory and
retrying the installation from there.
Best regards,
Dolores

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

This is a user to user forum. Apple isn't here and won't answer you. You need to contact Apple directly. You can use the Contact button at the bottom of the screen.

My iMessage will not let me sign in. The error message "Please check your network connection and try again" keeps popping up. I am connected to wifi.

My iMessage will not let me sign in. The error message "Please check your network connection and try again" keeps popping up. I am connected to wifi.

Welcome to Apple Support Discussions,
Have you tried:
Turn FaceTime or iMessage off and then back on in Settings.
Launch Settings by tapping the icon on the Home screen
Scroll down to Messages or FaceTime
Toggle the switch from on (green) to off (white)
Wait a minute
Toggle the switch back to on (green)
Wait for it to re-activate
Hard reboot your iPhone, iPod touch, or iPad
Make sure you're on Wi-Fi
Hold down both the Home button on the front, and the Sleep/Wake button on the top of your device
Wait for the Apple logo to appear
If it still doesn't work, repeat step 1 (turning FaceTime or iMessage off and on)
Reset network settings
Launch Settings by tapping on the icon on the Home screen
Tap on General
Scroll all the way to the bottom and tap on Reset
Tap on Reset Network Settings
If it still doesn't work, repeat step 1, then step 2, above (Turning FaceTime or iMessage off and one, rebooting).
(Source: http://www.imore.com/having-trouble-imessage-or-facetime-ios-7-heres-how-fix-it)

Officejet 7310 Error Message "Remove & check cartridge on right"

After installing a new HP cartridge # 96 on my Officejet 7310 the Error Message "Remove & check cartridge on right" persists.
Am using OS 10.7.4. Tried everything. Any thoughts would be greatly appreciated.

Hi ike69,
There are several causes to this issue, please see the following for an explanation and troubleshooting of the possible causes:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Script Error message when checking for updates....

Post Author: rcoleman
CA Forum: General Feedback
Getting a Script Error message when checking for updates or logging in to Crystal Reports. CR Developer v XI 11.0.0.1994.
Script Error
Line 481
Position 41
If g3()=True then main=True: Exit Fun
FYI to the Site Administrator

parkerpress wrote:
Any idea how to solve this if I haven't activated the 3GS service? I've been doing fine on wireless only.
Steve
Same problem here. After upgrading to iOS 4.2.1 a couple of weeks ago I'm getting the same error as the OP in the first post. I've never activated the 3G service.
I tried turning the cellular service on and checking for updates, pulled and replaced the SIM card, rebooted, nothing helps. I'm still getting the error when I click on the "Check for Update" button in iTunes (v10.1) when my iPad 64GB 3G is connected to my iMac. Any help would be appreciated. TIA.

Error message in "Check Solution Manager"

Similar Messages

Maybe you are looking for