Error message in Contribute on file checkout from Subversion

I have Contribute CS5 and Subversion talking to each other perfectly (I also have my Dreamweaver CS5.5 connected to this Subversion server). I can create a new file in Contribute and save it which checks the file into Subversion, but everytime I try to open either an exsisting file (or the new one I just created) I recieve an error message "There is a mismatch in the version of the file on the site, and the source file. Click OK to choose a version from the Subversion server." I say OK choose the most current version and then recieve another error message "The file in the Subversion repository could not be locked. Contact your admin for details"
Subersion and Dreamweaver 5.5 are working together like a charm (check in/out and locks) but Contribute not at all. I have read and reread the forums (both for Subversion and here) and none of the solutions are quite fit my problem (although I have tried them just to see).
Any suggestions?
Here are my details:
Contribute is running on a Windows 7 machine
Subversion is VisualSVN Server running on a Windows 2008 Server (running the Subversion build recommended by Dreamweaver 1.6.17 not the newest build 1.7)
I have a QA server (where we check in and out from) running on Windows 2008 server (all the 2008 servers are running the newest RC builds)
We connect to the QA server via a share

Hi,
You should create a RDS deployment and then you can set the licensing mode and name in the Deployment Properties.  I'm assuming you only have 1 server for all RDS purposes.  Please let me know if my assumption is incorrect.
1. Server Manager -- Dashboard -- Add roles and features
2. RDS installation, Quick Start, session-based deployment, finish wizard and restart
3. Once the server comes back up log on and let it finish the install
4. In Server Manager -- RDS -- Overview -- Tasks -- Edit Deployment Properties -- RD Licensing tab, set the licensing mode to match the type of RDS CALs you purchased, and set the FQDN of your RD Licensing server (itself)
After completing the above please test by logging on as a regular user and verify that there event is no longer being logged.  You may also open RD Licensing Manager and see that the RDS CALs are being issued.
Thanks.
-TP

Similar Messages

  • HT203180 I have bought several tv seasons from the itunes store. Recently some episodes will not sync with my ipad. The error message is that the file "could not be read or written". Previous episodes of the same series synced successfully.

    I have bought several tv seasons from the itunes store. Recently some episodes will not sync with my ipad. The error message is that the file "could not be read or written". Previous episodes of the same series synced successfully. Also while watching the same episode on my laptop (Mac Book Pro) it freezes.

    I had this same message appear today when i was putting new music on my ipod touch 4th gen. The only difference is that I wasnt using an external drive. I was using the one on my computer. This is the first time i have had this problem

  • Error message: Missing PDF maker files in Word 2007

    OK, I am beyond frustrated. I have had nothing but trouble with Windows Vista and Adobe Acrobat. Please help!!!
    What happens: first, the pdf addin for Word 2007 suddenly becomes disabled, for no apparent reason. Forget about trying to re-enable it through the Add-Ins menu, because Word tells me that the "connected state of Office Add-Ins registered in the HKEY_LOCAL_MACHINE cannot be changed". This is a problem for me, because I use a special font (Vietnamese) that sometimes gets corrupted when running pdf maker. The only consistent way I have found to avoid this problem is to run the pdf maker as "Quick PDF" and as far as I can see that option is only available through the pdf addin in Word, I have never been able to find it when I open the Acrobat program and create a pdf from there.
    Second problem: shortly after the pdf addin becomes disabled, my Acrobat program loses the ability to create pdfs altogether. I get the error message "Missing PDF maker files". Yes, I have tried repairing the installation and re-starting my computer per the instructions given. It doesn't fix the problem. I also tried looking in the Knowledge Database on this website, but it appears that the instructions they have to fix the problem there are for earlier versions of Word, not 2007, because my version of word does not look like the version of Word in their little videos.
    This is the second time this has happened. The first time I resolved the problem by a) re-installing Acrobat, which is a pain because it involves calling Adobe and wading through their customer service to get a new installation number, and b) paying a computer repair service to dig deep into the guts of my computer and convince it to change the Office Add-ins to allow the pdf addin again. It worked for about 6 months, and now I have the same problem again. For some reason Vista is spontaneously disabling Acrobat.
    I simply cannot deal with this every few months. We all know that Vista is a crappy program, but I run a business and I need a program that works with whatever crappy program Microsoft puts out. Please, can anyone give me suggestions about how to re-enable these functions when Vista disables them?
    Thanks in advance!
    Alycia

    for Office 2007, see if this Microsoft product will work for you
    http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en

  • Error Message: This type of file is not supported, or the required codec is not installed?

    I am trying to get media from my computer, and I only receive this error message :
    This type of file is not supported, or the required codec is not installed?
    What should I do? I have a window 8 laptop. My video files are from my itouch/ipod. I am using Premiere Elements 7.
    I have used this software with success before. HELP would greatly be appreciated!

    darlingdarleen
    Did both laptop 1 and 2 have QuickTime (latest version or any version) installed on the computers with Premiere Elements 7 when you got this "this type of file......" message?
    If you go to the opened Premiere Elements 7 projects involved and look at Share/Personal Computer/QuickTime, do you find that QuickTime Presets are shown and that you find export settings choices under the Advanced Button/Video Tab and Audio Tab?
    Look at the file name of the video. Do you see any irregularies in the name of the file, dots and such?
    If you record new iPod footage, open a new Premiere Elements project, and import that iPod footage, do you still get the error message? Putting aside, iTouch, what model iPod are these videos coming from?
    Thanks.
    ATR

  • Help on printing error messages to a log file

    Hi, may I know whether is there any way to print the error messages to a log file? Thanks for your help!

    noobboy,
    Please refrain from crossposting all of your questions into multiple forums. You were asked to stop this the last time you did this as well. Please be more considerate in future.

  • I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

  • Error Message: itunes.exe corrupt file

    Error Message: itunes.exe corrupt file
    \ipod_control\itunes\temp
    run chkdsk utility
    Itunes gives me this message, then acts normal
    downloads latest podcasts and videos but when I turn on the ipod video it hasn't been updated at all.
    Also from the start menu, I've tried to run chkdsk utility. when I do it does something 3-4 seconds and then that's it.
    My ipod shuffle works fine.
    Anybody have any ideas.
    Thanks

    try installing de software of that ipod, reinstall de ipod sofware and the itunes, after that go 2 apple.com and download the new updator. then install that too, and if possible redownload the new version of itunes. b4 u do all this , delete the software (old one ) of that ipod and itunes.. only the one that is giving u the problem, meaning b4 u reinstall the software that came with ur ipod, go 2 control panel.2.find add /remove programs.3then delete the old ipod and itunes software. then retstart ur computer. 4 then now go and reinstall the ipod software and itunes that came with ur ipod then after that redownload de ipod updator(new version is march 2006. get this and after that download the new version of itunes. then install all these, then u can also restore ur ipod by clicking on de updator when it opens press restore u will be commanded 2 plug in ur ipod. then follow de instructions. after all these ur itunes should be fine, and ur ipod software should be fine. ur itunes is corrupt , that might be causing the problem.

  • Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, V

    I'm working on a 64 bit windows 7 ultimate system and I can't get the Oracle.DataAccess and Oracle.Web to load on the helloworld web page
    See error below. At the very end i have the gacutil output. Also, the same dll's work on a 32 bit windows 7 system. I've also tried to load the beta version of the odac 64 bit
    but it it gets a "java stopped working error"
    Thanks in advance
    WEB PAGE ERRORVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
    Server Error in '/test/helloworld' Application.
    Configuration Error
    Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
    Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
    Source Error:
    Line 37:                     <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
    Line 38:                     <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
    Line 39:                     <add assembly="Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
    Line 40:                     <add assembly="Oracle.Web, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/></assemblies>
    Line 41:           </compilation>
    Source File: C:\inetpub\wwwroot\test\helloworld\web.config Line: 39
    Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
    === Pre-bind state information ===
    LOG: User = IIS APPPOOL\DefaultAppPool
    LOG: DisplayName = Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
    (Fully-specified)
    LOG: Appbase = file:///C:/inetpub/wwwroot/test/helloworld/
    LOG: Initial PrivatePath = C:\inetpub\wwwroot\test\helloworld\bin
    Calling assembly : (Unknown).
    ===
    LOG: This bind starts in default load context.
    LOG: Using application configuration file: C:\inetpub\wwwroot\test\helloworld\web.config
    LOG: Using host configuration file: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Aspnet.config
    LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\machine.config.
    LOG: Post-policy reference: Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
    LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.DLL.
    LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.DLL.
    LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.DLL.
    LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.DLL.
    LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.EXE.
    LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.EXE.
    LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.EXE.
    LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.EXE.
    Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
    gacuil output
    VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
    C:\Users\Administrator>C:\"Program Files"\"Microsoft SDKs"\Windows\v6.0A\Bin\x64
    \gacutil.exe /l Oracle.DataAccess
    Microsoft (R) .NET Global Assembly Cache Utility. Version 3.5.21022.8
    Copyright (c) Microsoft Corporation. All rights reserved.
    The Global Assembly Cache contains the following assemblies:
    Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f4
    29c47342, processorArchitecture=x86
    Edited by: burk_s on Jun 6, 2010 2:42 PM

    Hi Mubarak,
    Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
    http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
    http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How do I view downloaded content when the error message, not a supported file type or because the file has been damaged, shows up?

    I trying to download a book as a pdf to view through my adobe reader. But every time I do I keep getting the same error message saying that the file is not a supported file type or because the file has been damaged it can't be opened or viewed. What do I do and how do I get it to work. Because as of now I only have one option of downloading the book and I've tried to download the app notable pdf to see it that worked but it didn't either. As of right now I'm using google chrome but I also tried using Safari but it's still not working. I have a Mac with a Mac OS X updated system. I need an answer ASAP. Can anyone help me?

    I have the same issue.  Almost none of the PDFs I download from Safari browser can be opened. Same message about the file being damaged or not really a true PDF.  Neither of these are the issue here. Size of file is not an issue. I have Acrobat Reader XI so I believe that's pretty up to date.  If I open with Text Editor the file is blank.  any ideas?

  • I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got an error message, Cannot Open Output File. Can you please help me?

    I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got the error message, Cannot Open Output File.

    The file could be downloaded incorrectly. Could you redownload it again from [http://getfirefox.com http://getfirefox.com]?

  • Bearts Audio Control Pannel will not open. Get error message cannot find startup file

    Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
    Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel.  Looked for download to re-install BEATS Audio but cannot find one.
    Any suggestions.
    Sound works with IDT driver installed.
    Pavilion P7-1500Z

    Hi,
    Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
    Recovery Manager - Windows 8.
    Recovery Manager - Windows 7
    After the reinstallation has completed, restart the PC.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • When trying to open itoons I get an error message: Program C\program files (x86) R6034  An application has made an attempt to load the C runtime library incorrectly.

    when trying to open itoons I get an error message: Program C\program files (x86) R6034  An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more infomation.

    Hello Michwilltwo,
    It sounds like you are unble to open iTunes after a recent update. I would recommend the troubleshooting steps from the article named:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Be sure to follow the instructions as outlined by the links in the article as there is a specific order in which to uninstall iTunes and its associated programs.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Mavericks Update - Error message - The product distribution file could not be verified

    Help!
    Trying to download mavericks (from 10.7.5) as I have just had a new hard disk isntalled and need to start from scratch.
    Wanting to re download iphoto but I can't as I need a newer OS so trying to download mavericks from the app store. My internet is very slow and keeps cutting out so I have tried a few times but it's not working.
    Now I'm getting an error message - 'the product distribution fil could not be verified'
    If anyone can help that would be great.
    Or even let me know where I can get a copy of iphoto to suit OS 10.7.5 so I don't need to download a whole new OS.

    You're trying to download a 5 GB file. If your Internet connection is lousy, you won't have much success. Try another network.

  • Error message on On Location files

    I use Adobe On Location on a laptop for recording video quite a bit.  I then copy the folder with the On Location files to my main computer for editing.  When I import an .avi file created in On Location into Premiere CS4, I see a yellow exclamation symbol in lower right hand corner.  Clicking on this symbol brings up the message "File importer detected an inconsistancy in the structure of xxxx.avi.  Reading and writing this file's metadata (XMP) has been disabled."  However, I have no problems editing the files, so I haven't worried about it.  But I am curious to know why this happens on every .avi file created in On Location, and if I should be worried about it.
    J. D.

    I am having the same issue when importing clips from OnLocation.  I am beginning a huge production and I am concerned this issue might cause issues down the road with editing, encoding, mastering.
    I have checked the files and sequence and they are the same.
    I have seen others have this issue, but there does not seem to be anyone that knows exactly why it's happening and how to correct it.  Including Adobe,  I weent round & round with Adobe support in India and finally gave up.
    Error message in Event Panel:  File importer detected an inconsistency in the file structure of filename.avi.  Reading and writing this file's metadate (XMP) has been disabled.
    Adobe Production Premium CS4
         Premier Pro CS4 v.4.2.1 
         OnLocation CS4
    Windows 7, Ultimate 64bit
    12GB Memory
    1TB System HDD
    2TB - RAID 0 Video Processing HDDs
    2TB Video Storage HDD
    nVida Quadro 1800 1GB Video
    1934 FW Capture

  • Error message: The iTunes Library file cannot be saved. An unknown error occurred (-54).

    I opened iTunes and downloaded 2 songs from http://www.reverbnation.com. Shortly after I started getting this error message: The iTunes Library file cannot be saved. An unknown error occurred (-54). Anyone dealt with this before?

    == Error -54 ==
    From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
    First, try simply restarting your computer.
    iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814

Maybe you are looking for