Error message in CPS Manual intervention window

Hi All,
In Redwood CPS, we get the following error message under the Manual intervention filter in Job monitor.
JCS-122035: Unable to persist: JCS-XXXXX: @locale2@:(com.redwood.scheduler.exception.Class.persistence.api.PersistenceException$AmbiguousField 'Behavior' 'JCS_JOB0' 'JCS_JOBDEF0' ' aliases=true {Job=Job, a_1=JobDefinition}')
But as such all the jobs seems to be running fine without any issues.
Could you throw some light on the error message and its likely consequence if any in the future?
Thanks,
Balaji

Hi,
Try this:
tables : BSIS.
parameter : bukrs like bsis-bukrs.
at selection-screen.
if bukrs eq '1000'.
   message 'Co. Code is not allowed' type 'I'.
endif.
Thanks,
Sri.

Similar Messages

  • Displaying Error message in a pop-up window

    Hi,
    I need to validate the entry in a field on the selection screen and display the error message if the entry does not exists in the corresponding table.  <b>But the error message should be displayed in a pop-up such  that on continuing , the selection screen re-appears.</b>
    How can i  display the error message in a pop-up window  with a single continue button?
    <b>( i dont want to display the yes and no options as in case of fm popup_to_confirm etc.)</b>
    thanks,
    vartika

    Hi,
    Try this:
    tables : BSIS.
    parameter : bukrs like bsis-bukrs.
    at selection-screen.
    if bukrs eq '1000'.
       message 'Co. Code is not allowed' type 'I'.
    endif.
    Thanks,
    Sri.

  • Error message while syncing contacts with windows address book

    getting error message while syncing contacts from windows address book cradsstring something

    Hello,
    The complete and exact error message is always more helpful than some small snippet something. Please provide that, and maybe we can make some better guesses for you.
    Thanks and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • ITunes displays -50 error message when syncing iPod on windows 7

    I am trying to sync my ipod and appears this error
    iTunes displays -50 error message when syncing iPod

    Hey ermides,
    Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
    iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
    http://support.apple.com/en-us/ts1539
    Thanks,
    Matt M.

  • I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

    I keep getting an error message when installing iTunes with windows 8

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.

    I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.

    iTunes 9.0.x is certainly compatible with Win7 64 bit since I use that exact setup on 3 different PCs. Two suggestions for your installation problems:
    1)Download a new copy of the 64 bit installer from Apple then, instead of just running the itunes installer right click on it and try 'run as adminstrator'. In my experience that clears up a world of problems with program installation in Win7 and Vista. This is necessary even if you're already logged in as an administrator.
    2) Try the previous version of iTunes (9.0.3). You can get a copy at http://www.oldapps.com/itunes.php?old_itunes=54 again right click on the file and "run as administrator"
    Good luck, hope this helps.
    Lil

  • Forms 6i Error Messages and Codes Manual

    Does Forms6i have a separate Error Messages and Codes Manual the way Form4.5 had ?
    Thanks.

    Hi John,
    Help on Built-ins & Error Messages are in Forms itself.
    Click the Help Menu (Extreme Right) => Form Builder Help Topics. Type the Error Number (eg. FRM-10000)/ Built-in Name. It provides list of related topics, click Display and detail help is provided.
    Have a nice day.
    Mohammed Osman

  • Error Message comes up saying this "Windows Cannot find C:\Program Files\Mozilla Firefox\Firefox.exe"

    Error Message comes up saying this "Windows Cannot find C:\Program Files\Mozilla Firefox\Firefox.exe"
    == This happened ==
    Every time Firefox opened
    == Since 6/7/2010 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; DS_gamingharbor; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Hello Jignesh.
    This issue has been reported before by other users, and it turns out it's the effect of malware. In other words, your system is infected. To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
    SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
    AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
    Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
    Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
    If these don't find it or can't clear it, please tell me and I'll provide you with further assistance.

  • Purchased Photoshop Elements 13, downloaded, entered serial numbers, then got the error message: OS Requirement not met, Windows Vista not supported.

    Purchased Photoshop Elements 13 (upgraded from Photoshop Elements 10), downloaded, entered serial numbers, then got the error message: "OS Requirement not met, Windows Vista not supported" now what?

    Sweetie Bug wrote:
    now what?
    System requirements | Adobe Photoshop Elements
    The last version of PSE which supported Vista was version 12.
    You'll either have to upgrade your operating system to Windows 7 or Windows 8 or return PSE 13 for a refund.

  • Error message "The printer requires Interventi​on" on Windows 8.1

    I have Windows 8.1 and get an error message every time I send a print job.  The jobs just sit in the print queue.  The message says that intervention is required.  We are using the wireless option.  We have other computers that run Windows 7 and they are NOT having this problem.  Has anyone else run into this issue?  Does anyone know how to fix it?  I have tried unistalling and reinstalling already.

    Hello there @AndyG74 
    Welcome to the forums!
    I understand you are running Windows 8.1, and when you send a print job, you are seeing an error and the print job sits in the print queue, without printing it out. As your Windows 7 systems run and print fine, this would seem to be more of a software problem with the Windows 8.1 system and not the printer hardware.
    My suggestions to you, would be to try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. Please save a screen shot of the results and post them back for me to review.
    Also, try printing from Notepad and let me know if that works.
    If the printing issue seems to be solely within one program, include that information too!
    Thank you,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Error message "Invalid Key Manual"

    I recently bought the E2500 Router and I am using the EA2500 Adapter with it . I have this set-up on 2 Desktop PC's . 1 Pc is working just fine with this set-up . The other keeps giving me an Error message of "Invalid Key Manual" . What does this mean ? The adapter is working because it does find the Router as a usable connection . It just isn't able to connect to it and keeps giving me the same Error message .
    Thanks for any help you can give me

    rpswartz wrote:
    I had the exact error message trying to connect my PC using the Cisco AE1200 wireless adapter and Virgin Mobile MiFi.  Cisco support said it was a Virgin Mobile problem and Virgin Mobile said it was a Cisco problem.  I thought the Cisco adapter was bad, so I bought another Cisco adapter.  I will also try another brand of adapter, and if it works, I will try to get my money back from Cisco.
    Is it your first time to use this adapter or you've had it working before? What's the OS of your computer? From what I know, this adapter will work on Windows XP SP3, Windows Vista SP1 or later, or Windows 7 and works on USB 2.0 and 3.0 versions. Did you try by the way to uninstall and reinstall it using the updated drivers from the Cisco website? You may want to try that as well as installing it on a different computer to see if the adapter is going to work or not.

  • Error message when installing iTunes on Windows 7, "Apple Application Support was not found, Error 2"

    I can successfully download iTunes on my PC, but receive an error message when I try to install the file: "Apple Application Support was not found... Error 2" I've tried deleting the file and reinstalling it to no avail. Any ideas?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Error message when installing itunes on Windows XP

    C:Documents and setting not vaild with Win32 applications.
    I do not know where to go from here.

    Are you getting the error message discussed in the following document?
    iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application"

  • I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

    I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I  am using windows 7 professional install disc. I  can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • Issue error message in a pop-up window

    Hii experts,
    How do I issue a message in a pop-up window in a normal report programming? For eg if i click on particular box in SAP graphic, a message window should come up with some information about that box.
    Thanx in advance

    Hi ,
    First track the event let say at line selection(in case of reports)
      then use 
    CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
          EXPORTING
            endpos_col         = 80
            endpos_row         = 25
            startpos_col       = 1
            startpos_row       = 1
            titletext          = text-300
      IMPORTING
        CHOISE             =
          TABLES
            valuetab           = l_return
         EXCEPTIONS
           break_off          = 1
           OTHERS             = 2
    Append the errors in l_return.
    l_return is of type below:
    DATA: l_return LIKE bapireturn OCCURS 0 WITH HEADER LINE.
    Thanks & Regards
    Ruchi Tiwari

Maybe you are looking for

  • Line item text CRM 7 Properties parameter in SalesDocumentCRM

    Greetings. I'm having a heck of a time sending my custom textid into the CRM backend in CR M 7.0. I notice in the SalesDocumentCRM class, there is some logic in the initBackendObject(Properties props, BackendBusinessObjectParams params) method there

  • Shared services Access

    dear All, I have given access to user in Shared services as administrator for Planning application but he is still able to see calculation manager and is able to open EAS console as well. Please suggest me , I want to give access to Only Planning app

  • Query to get summarized and detailed data

    Hi experts, The scenario is as follows: Generic extractor -> DSO -> Infocube Now, the cube have item level details. My concern is, the cube might grow very big and impact the performance. Is it possible to have a query that retrieves summarized infor

  • Libvisual not seeing any features

    I'm on Arch x86_64, and have the newest versions of libvisual and libvisual-plugins installed, but Elisa is not showing any visualisations for music. I found that this can be the case if libvisual or libvisual-plugins is not installed - but they are!

  • Imovie 11 get started

    where can I find a detailed tutuiral on how to use imovie 11 iOs x or lion whatever it is. this is my first apple pc i got this week - 27 in imac. help i really want to use this to make movies with my many vid clips. i only found a getting started fo