Error message in Deja Vu backup

Recently when backing up with Deja Vu, I get the following error message:
PROBLEM: The Safety Net folder could not be found. No files will be archived.
REASON: The path to the Safety Net folder may have changed, or the disk on which it is located may not be connected.
SOLUTION: Ensure that the disk containing the Safety Net folder is connected at backup time. If the path to the Safety Net folder has changed, you should re-select it in Deja Vu's Options.
I have no idea what the Safety Net folder is, whether this is important, as the backup seems to have taken place correctly (i.e. all changes since the last backup have been backed up!).
Does anyone have any insight?
As ever, any help is much appreciated.
Oliver.

No, it's nothing to worry about. Do you have Deja Vu's Auto-Connect feature enabled? If so, disable it and try your backup again.
BTW, the developer of Deja Vu has his own website with support forums. You're more likely to get a definitive answer from another user if you post there. Currently it's down for maintenance (as of Jan 13/06).
http://propagandaprod.com/forums/index.php

Similar Messages

  • While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred.  Do you want to continue with altering this Iphone? When you continue al the material on this I

    While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred.  Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
    I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
    Please can somebody help me, so I can make backup.
    Greetz,
    Derk

    It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
    from: http://support.apple.com/kb/HT4946
    The folder where your backup data are stored varies depending on the computer's operating system.   Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac:  ~/Library/Application Support/MobileSync/Backup/
    Windows XP:  \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista and Windows 7:  \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • TS1550 My time capsule will not back up. There is a time machine error message that states "The backup disk image "/volumes/Backup/Jane's MacBook Pro.sparsebundle" is already in use. How do I correct this problem?

    My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
    I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
    How do I correct this problem?

    Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

  • Itunes gives error message when trying to backup ipone 6.

    ITunes gives an error message when trying to backup IPhone 6.  I followed some of the advice I have seen delete old backups and try again, but I still get an error message. 

    What error message?
    Thanks

  • Time Machine error message "Unable to complete backup....."

    I just purchased Time Capsule and attempted to do my initial backup. I had to stop during the middle of the process. When I returned to resume the backup I get the following error message: "Unable to create backup. An error occurred creating the backup directory." Has anyone else gotten this error message? If so, any suggestions on how to fix this. I tried doing everything that Setup Guide suggested with no success.
    After reading some of the posts here, I've made sure that my Time Capsule name is short and without special characters but nothing has worked. Any help would be appreciated.

    My initial backup (350GB on WiFi N 5Ghz wide-channel) seemed like it would take 3 days (which is fine), but after 1 day, I too got that error. I started the backup again and it went for an hour, then the same error. Started again, went for 5 minutes, same error. Now I can't even start it again--I've tried many times and the error is now instantaneous.
    The first time the error happened, the backup seemed to pick up where it left off. After that, though, all progress each time was lost.
    The network itself has never gone down, and the light has stayed green. And the 2Wire DSL router it's attached to seems to be fine as well.
    I'm wiping the drive (with the zero option in the hopes of catching and physical defects early) and will try again tomorrow.
    All software and firmware is up-to-date: I made sure before turning on the Time Capsule.
    Ethernet is not really an option--I'd have to run a long cord though a high-traffic area, and accidents would happen.

  • TS3694 Unable to back up my Iphone 4S, error message states that my backup is corrupt and needs to be deleted. How do I delete the backup file?

    Unable to back up my Iphone 4S, error message states that my backup is corrupt and needs to be deleted. How do I delete the backup file?
    Help needed.

    Thanks I did that and it worked.
    Another question if you dont mind. If i want to undelete the backup file, is there a way?

  • Cannot backup iPhone 3GS. Error Message: iTunes could not backup iPhone because iPhone Disconnected. What is the fix for this problem?

    Hi, I'm hoping someone can help me find a solution to my problem.
    When a backup is attempted, it starts off as if it's working, then stops and the following error message appears: "iTunes could not backup iPhone because the iPhone disconnected". But, the iPhone doesn't really disconnect! It must be some type of internal glitch.
    The iPhone is a 3GS and I have mostly pictures and contacts, two songs, a total of 33 apps. The iOS is updated (6.1.6). I do not know if this phone was ever jailbroke. I have been able to backup this phone before, but cannot now. The last backup was 9/21/13, it is now 3/2/14.
    Sorry if there is too much info, or not the correct info to find a solution!
    Also, I must say that although I am not a tekkie, I've seen many different types of various programs and I find that iTunes is not very intuitive...don't mean to hurt anyone's feelings, just my humble opinion.
    Thank You,
    Camp917

    Hey Lawrence,
    A big THANK YOU!! to you! Your suggestions worked!
    Before I changed USB ports (more on that in a sec...), I employed one of your suggestions that you gave to someone else with the same problem...and that was to clean the connector on the bottom of the phone with a soft dry tooth brush. I couldn't believe the amount of lint that came out! Especially what was found in either end...had to do some very careful picking. (Almost enough lint to knit a small sweater!!)
    Changing the USB port was the second and final step required for a successful backup. My computer is a laptop, and I did have a USB Bluetooth adapter (for another device) installed. I removed  the adapter, plugged the iPhone into that USB port, crossed my fingers...and it worked!!!
    Now if I can figure out the rest of this darn program, I might upgrade to a new iPhone!
    Again, thank you very much Lawrence!
    Rich

  • Error Message from RMAN after backup

    Hello,
    I get this message when i try to backup a imported database:
    RMAN-00571: ==================================================
    =========
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ==================================================
    =========
    RMAN-03007: retryable error occurred during execution of command: backup
    RMAN-07004: unhandled exception during command execution on channel tut
    RMAN-10035: exception raised in RPC: ORA-19502: write error on file "/ora_db/backup/SKR/test.bak", blockno 238593 (blocksize=512)
    ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file
    Additional information: 238593
    Additional information: 1024
    Additional information: 239121
    RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
    The RMAN ist configured correctly because i can backup the database before importing the dumpfile.
    I tryed to set the Parameter SETSIZE but then i get a different error message.
    Discspace free: 50 GB
    I hope someone can help me.
    Thorsten

    OK,
    its already done, you have to set "setsize" (Thanks to th e helper).
    But why?

  • Receiving error message when trying to backup computer in Windows Vista Ultimate

    I am receiving an error message when trying to back up files from backup and restore in Vista Ultimate it says Access is denied (0x80070005). This problem began occurring recently after a bunch of unwanted programs were inadvertently downloaded from the
    internet. I uninstalled all of them using REVo uninstaller but some of the files were not removed in the process. Can someone out there help me resolve this problem with the error message I am experiencing? THX 
    DAG

    Karlluch...
    Try here >  iTunes for Windows: "Error 7" message when opening iTunes

  • Whenever i try to backup my Iphone 4 i get an error message " Itunes can not backup (my Iphone) because  the backup was corrupted or not compatible with the Iphone"

    whenever i try to back up my iphone it gives me an error message "itunes could not back up (my)iphone because backup was corrupted or not compatible with your iphone" i already deleted the itunes backups through the prefrences tab. this has not helped. what am i doing wrong?

    I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

  • I am trying to restore bookmarks to Version 5 from a backup I made from Version 4.+. I get an error message "Unable to process backup file." What's wrong?

    I made a backup of my bookmarks when I was running Firefox Version 4+ (stored in a "json" file on a thumb drive). My primary hard disk crashed and when I down loaded Firefox on to a new hard drive, I got version 5.0. When I tried to restore the saved bookmarks, I got an error message that says "Unable to process backup file."

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    * http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

  • Error Messages when trying to Backup Nokia Photos

    I'm trying to backup Nokia Photos so I can transfer to a new PC.
    I was on version 1.5.242 and got a simple error message after the initialisation that it couldn't backup .. no other explanation.
    I downloaded and installed Version 1.6 and now I cam getting a bizarre error message that is about 3 pages long and refers to sql, database errors and all sorts of other gubbins that mean absolutely nothing to a standard user like myself.  I'm not totally computer illiterate but that message was way beyond my comprehension.
    Can anyone help?
    Is there another way to transfer my files over to my new pc other than the non-functioning backup option?
    Thanks

    Please copy and paste the exact errror message and all the tech talk gubbins here

  • HT1766 I get an error message when trying to backup my phone:  HELP

    Error message: iTunes could not back up the iPhone "MY iPhone" because the backup was corrupt or not compatible with the iPhone.
    I don't understand why it wouldn't be compatible; using Macbook pro with iphone5. Itunes us up to date on both devises. What could be wrong here? Please help with any information possible. Thank you.

    Hey Aarohead,
    If, when trying to create an iPhone backup, iTunes displays an alert message and the backup fails, you'll want to follow along with the troubleshooting steps in this article and see if that resolves the issue:
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Have a good one,
    David

  • Why am i getting an error message when trying to backup my iphone

    Getting an error message that iTunes can't synch ----phone because there was an error. 

    If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test:   Go to...
    Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options.  Turn off all apps from backup and then do a manual backup.  If that doesn't work, then this post will not help.  If the backup works, then go back to the app list and turn some on and try another backup.  If successful, keep repeating these steps.  If it fails at some point, then try to zero in on the one app that seems to make the backup fail.  (I had this problem and found one app failing, probably due to a corrupt data file.)
    This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

Maybe you are looking for