Error message in delivery

hi Gurus
pls i was getting this error message while tring to create delivery for one of our new plants created "material not define for sales org ARM1 DIST CHAN. lang..E... after going into the error msg it say i should check the following"
.The copy conditions specified in Specify copy control for deliveries do not allow the order to be delivered.
What can i do to resolve this and how do i go about it
Thanks in advance

material not define for sales org
Go to MM02, key in the material code and select the sales views. Ensure that the material which is having the sales area is the same as the one in sale order.
copy conditions specified in Specify copy control for deliveries
do not allow the order to be delivered.
Go to VTLA and check whether you have maintained copy control for your order type to delivery type with the related item category.
thanks
G. Lakshmipathi

Similar Messages

Email not getting send: Error message 'No delivery to external email id

Hi All,
Whenever i am trying to send mail to external address from Business Workplace (Tcode: SBWP), it initially sets the status of the mail as waiting with message 'Will be sent after server date:server time'. But after 6 hours, its status changes to error with message 'No delivery to <external email id>.
When i checked in error log (in SOST), it displays the following messages:
1. Document sent
2. Wait for Communications service
3. No delivery to <external email id> (after 6 hours from Document sent/Wait for communications service time)
Please suggest me how to resolve this issue.
Thanks in advance.
Regards,
Shradhanjali Mishra

Hi Shane,
Extremely sorry for the late reply.
I asked the BASIS team to fix the issue.. and i think they did some configuration as a result of which i am not getting any error msg now while sending email.
I guess you also need to check with your BASIS team to fix this issue.
Regards,
Shradhanjali

Error Message in Delivery : Quantity falls below minimum inventory level

Version : SBO 2005 A SP01 PL22
Description of Issue: When trying to Add a Delivery you get Error Message: Quantity falls below minimum inventory level [Delivery - Rows - Warehouse Code] [line: 0] [Message 131-14]. You are then unable to Post the Delivery and Print the corresponding Packing List.
Testing Findings: Upon detailed testing of this issue and work with SAP Support it has been determined that the issue is that the Delivery Row Ordered Qty is looking at the OITM In Stock Qty when determining if the full Row Qty can ship instead of the OITW In Stock Qty. This is an issue because due to other "bugs" this Client has encountered their OITW Qtys in other Whses are negative, even though they have the Block Negative Inventory and the Manage Inventory by Warehouse Flags Checked On. This then reduces the OITM Qty below the level of the Delivery Row and you get the above error message.
Example: A Sales Order Row has an Order Qty of 15 for Whse 01 for a particular Item. The OITW In Stock Qty for Whse 01 = 17. The OITW In Stock Qty for Whse 03 = -7. The Block Negative Inventory and Manage Inventory by Whse Flags are both Checked On. The 'Net' OITM In Stock = 10. When you try to Copy the Sales Order to a Delivery and Add the Delivery, you get the above Error Message and it will not allow you to Post the Delivery and Print the Packing List.
Current Workaround: Client is performing Inventory Goods Receipts to bring the In Stock Qtys in the affected Whses to greater than or equal to zero.
Proposed Solution: SAP Development to add logic to SAP Business One to validate the Delivery Row Qtys to Ship against the OITW In Stock Qtys instead of OITM when the Manage Inventory by Whse Flag is checked on.
Supporting Documentation: This DRQ Request relates to Support Message # 864405 2007. All above referenced testing details including example SO#'s, Item #'s, etc. and an entire copy of the Client's database are available and linked to this Message #.

Hi Ramu,
also you can make sure you are choosing the right WH in ctrlshiftS windows if You do, then chek on Inventory -> Inventory report -> inventory status if you have enought and available quantities for the delivery, if you dont then you gonna have to make the PO and the AP Invoice to add more quantity to that item
regards

How to add the error message into Delivery Error Log (VL10A,VL10X)

Hi,
I have a to add my custom message into Delivery creation error log (VBFS, VBSS)
This message should be shown in the Collective process log (VL10X, VL10A).
Please give me the soln to solve this problem.
I have searched in SDN, i didnt get the proper solution
Thanks
Shankar

HI,
Make use of the BADi "LE_SHP_DELIVERY_PROC"
Use the method DELIVERY_FINAL_CHECK.
Pass the error messages in table CT_FINCHDEL.
Regards,
Ankur Parab

Error Message when Delivery Note is created

HI ALL,
          "Quantity falls into negative inventory" error message appears when Delivery Note is created from Sale Orders in SAP B1 system.
          Pls, solve my problem,
         Thanks u so much.
kyimoh
Best Regards

hi kyimoh
Please check Your Item In Stock Quantity status. If your quantity less then ur Delivery quantity. So You have to increase your item In Stock Quantity.
Thanks
Khan Imran

Error message from delivery release to sales invoice drawing of data

cannot post parent item with child item from delivery receipt to sales invoice
error message is ar invoice rows- warehouse code lino:0 ],'no matching records found "inventory log message"]
any suggestions on the remedy for this?

the Bom is sales and i've changed the warehouse code so that the parent item together with the child items would be posted from delivery note/release towards the sales invoice,i've tested it at their test database and works just fine without any errors popping out.
ive changed specifically where they draw the child items--instead of DIY001,Ive changed it to warehouse Diy005 warehouse, while i did not changed the warehouse assigned for the parent which is coded as DIY001
Thank you Nat for spending time to answer my query. ive got to test some more data if ever the changed of business partner name would have an effect with the transactions. the reason why i am testing it is that they have a same Bp partner code for two persons.

Error message : No delivery items could be created

Hi,
I got this error message when I tried to create a delivery from the sales order. Appreciate if someone could advise me on what I have done wrong or missed out.
Thanks!

Dear Friend,
As friend Srinath suggested, check in VOV7, whether the check box Schedule line allowed is checked for your item category..
And also check in VOV6, whether item relevant for delivery check box has been checked or not for your schedule line category..
Both should be checked..
Also, check whether stock exists for that material in the plant mentioned in the sale order..
Thanks,
Venkatesh.S.P

Customer credit limit check and error message in delivery

Hi,
I have a required to block the creation of delivery , if customer outstanding amount is there more than 150 days after the payment due, system should give the error message for this and should not allow to create the delivery till that open item get cleared, i try with OVA8 with risk category 002 and document type category 02 and 03 by selecting the oldest open item check box setting reaction as D status block Days oldestItem : 150 but with this system is still allowing to create the delivery, how to blcok this if i do any changes in the SO then first time it set the static credit limit block but once it is release with VKM3 then it is alllowing to create the delivery, so how to block the delivery creaton.
Is there any user exit in delivery creation VL01N, to check the cusromer open items and block.
regards,
zafar
Edited by: zafar karnalkar on Sep 5, 2011 7:49 AM

Hi
To control the changes in the SO try to control a VOFM subroutine and set it the field 'No credit check' in OVA8. See the VOFM 002 (as a template) but you need the changes over the SO, and this you have in the 001. In delivery I don't know anything (for instance, see SAP Note 415716 - User exits in delivery processing). My idea is use the subroutine 001 to lock the SO, and with the field VGBEL and VGPOS in LIPS, search the status of credit for this SO when you create the delivery, and then, use the proposed userexits in the cited note.
I hope this helps you
Regards
Eduardo

Error Message when delivery qty more then po qty in MV50AFZ1

Hi
Sap Gurus,
I gt a requirement that while creating deliveries in vl02n
if delivery quantity greater then po qty it should through error
but i have alredy done coding in mv50afz1 user exit its working fine. My problem is if delivery no is differnt for the po no.
it is not giving error because delivery quantity is less for differnt deliveries .
this is the code i have written,
data : v_menge type ekpo-menge,
Getting Quantity from ekpo Table
select single menge
              into v_menge from ekpo
              where ebeln = lips-vgbel
              and ebelp = lips-vgpos.
if sy-subrc = 0.
Cheking the Condition for Delivery Type
   if likp-lfart = 'ZGND' or likp-lfart = 'ZGNL' or likp-lfart = 'ZGNS'.
Cheking Condition if Delivery Quntity More than Po Quantity
    if v_menge < lips-lfimg.
     message e002(zt) with 'Delivery Qty Cannot be Greater than PO Qty'.
    endif.
endif.
endif.
this is checking for single delivery quantiry greater then po qty
but if multiple deliveries it is not working.
Please suggest me to write logic and coding chages.
ravi n
Edited by: Nekkannti Ravi Kumar on May 12, 2008 10:01 AM

Hi,
First u have to find all deliveries againegt PO Item (material). find out total deleviry qty + present delivery qty.
than check with PO qty ..
I think it will solve.............
Gupta.......

Message No delivery type defined for supplying plant BP01 and document type

Hi all,
I am trying to create a purchase order with a BP01 supplier and the BP02 division but I get the following error message No delivery type defined for supplying plant BP01 and document type.
When I create a PO with a BP02 supplier and the BP01 I do not get any message.
How can I fix it ?
Thanks
Regards
Pierre

1)Create one Customer for Supplying Plant Sales area and assign this Customer no with Receiving Plant in OLME---> PO -
> Set up STO -
> define Shipping Data for plants. and maintain the same sales area in your Supplying plant.
2) In OLME---> PO -
> Set up STO.....for your Document Type: UB and Suppying plant Combination assign Del. Type NL and Checking rule RP
3) In OLME---> PO -
> Set up STO...for your Supplying Plant and Receiving Plant combination Maintain Doc. Type : UB
Make sure you are maintaining Sales View for your Material at Supplying Plant.
4) Maintain Shipping point at, SPRO----> Logistics Execution -
> Shipping -
> Basic Shipping Functions -
> Shipping Point Determination for Plants.....there for your Loading group,Shipping Condition, Shipping Plant combination maintain Shipping plant..
Now Create STO in ME21N with Doc.type: UB at Receiving Plant.
Then Create Delivery in VL10B from Supplying Plant...
Then Do PGI in VL02N from supplying Plant.
Then do GR at Receiving Plant based on Outbound Delivery at Receiving Plant...

Error Message V1810 - Make to Order No Change delivery plant in Sales Order

Hello, for a client where I'm setting the flow intercompany , but i have an error on the Sales Order when I must be change delivery plant.
Scenario: Make to Order, Product configuration, Sales Order BOM created by CS60
Step:
1 - I create sales order fo company X delivery plant 1000
2 - Creates Order BOM on plant 2000 Company Y
3 - creates MRP Planned Order
4 - Convert Planned Order to Production Order
For different issues can happen that you decide to ship the goods to a different plant than the X. Production Plant remains 2000.
If I try to change the plant on the Order system stops me with the following error:
Message V1810 - Plant can no longer be changed
Diagnosis
The plant can no longer be changed in the Following situations:
The item has been assigned to a project.
There is a production order for the order item but it is not a staticassembly order.
Already have accrued costs.
For the very complex structure of the product I can not delete the production order and sales order BOM.
How do I handle these cases?
Can anyone help me?
Best regards
Giuseppe

Hi Guiseppe,
can you please answer some questionsa to understand your requirement.
if you want to transfer the goods from plant to plant you can do it through Stcok transfer MB1B t code.
1.then why you want to change the plant? in which element you are trying to do in sales order or production order?
2.you mention it as intercompany and MTO can you be clear for whoom you got the sales order(internal or External Customer?

Warning/Error Message delivery unit in sales order

Hello,
how is it possible to throw a warning or error message in the sales order, when the entered quantity is not a multiple of the delivery unit specified in material master sales tab 1?
Thanks
Anne

Hi,
Please take the help of your abaper and modify the user exit for sales order . Put a validation check at the time of entering the order quantity w . r .t delivery unit mentioned in the material master for that sales area and through a warning or error message as per your requirement.
For user exit please go through the below link:
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Hope this will help you to resolve your issue.
Regards,
Krishna O

Error Message during posting return delivery against materil document

Dear experts
I have created a purchase order with batch specific unit of measure KAI.
I created the inbound delivery document (say for eg: 30,000 KG)
I have taken GRN for the above IBD through MIGO transaction with 101 movement for all 30,000 KG.
Later i have posted the return delivery 122 movement with reference to above 101 material document. 30,000 KG
After this i realized that i need cancel the 101 movement document.
So cancelled the 122 movement document, and try to cancell the 101 material document.
Then system is issuing error message VLA 321 "Movement type 102 cannot be used here".
Also if i again want to post return delivery to send the stock back, then also i have error message. but this time it is VLA 319
"Return delivery qty greater than previously GR-posted qty:"
My Support package for SAP_APPL, relese 600 is SAPKH60019.
Please suggest me solution to fix these errors as these are not relavant for the situation.
Regards/Murali

Hi,
Can you please check this note...
Note 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
Note 1342935 - Error message BORGR 623 during GR reversal in MIGO
Regards
Bhuban

Error message for over delivery quantity in case of batch split.

Hi All,
System is throwing error message if I try to to enter delivery quantity more than target quantity(order quantity) in case of standard process which is ok but in case of batch split when split line created (9000001 for line 10) and if go to item level in line item 900001 and enter delivery quantity more than target quantity system is giving only information message, still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massege as well. Delivery item category for all the line items is same and status B is assigned to over delivery in item category. Is there any standard way of achieving this or do we need any modification, if yes then what user exit need to use.
I searched alot about this in last three days but found only one thread which is unanswered, please provide your valuable suggestions. If this problem is discussed already and solved please provide me the link to that thread as I could't find any.
Thanks,
Davinder

Hi
Still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massage as well.
I think it you can possible to change the Information message as Warning message.
Please go to SE91 put the Message Class XX (Ex:V1) there And in No. field enter the message number (Ex: If message no V1293 enter the number as 293)
AND
go for
where used in then select only Program >ok then Program will come select the Program > double click, you will l find the message with the Description.
Now with help of ABAP with just comment on these both the messages. Afterwards you will get the Error message.
Hope this will helps you
Dasaradha

Error message while creating an inbound delivery to generate an idoc

hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leo

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Error message in delivery

Similar Messages

Maybe you are looking for