Error message in dialog programming

hi folks,
I need some help in anaylzing the error while saving the data on the screen. The error message reads 'Status COP of the user interface ZMP40000 screen missing' This is a custom screen. It is in relation to a task of hiding a particular screen from display, hence i need to modify the module pool.
Any idea what it is??
Thanks in advance. Any thoughts to this will really be helfpul.
Vinu

Yes, I have because I am doing the testing in QAS. The error showed up when I copied one of screens for standard module pool program (MP400000) to custom pool program (ZMP400000) in se51. when I run the transaction pb40 for that screen it is stauts (green) message shwoing in the status bar.
Thanks for responding.
vinu

Similar Messages

A way to display error messages from the program

Dear all,
I am looking forward to display a set of error messages(in a internal table) during the execution of the program to the user.
I wanted to know the better way of displaying error messages from my program with more options.
Well I tried out using displaying errors as ALV list/Grid or as simple list processing.
But I found some stanadard transactions (Like in MM and FI where errors are shown in a better way, but failed to find out how they are done.
Please guide me.
Thanks in advance
Aryan

Try to use application logging it has a very good way to display a set of messages.
[http://abap4.tripod.com/Using_Application_Logging.html|http://abap4.tripod.com/Using_Application_Logging.html]
Run this report in se38 an example sap report to understand logging way to show a set of messages
Report Name : SBAL_DEMO_01
Edited by: Vighneswaran CE on Dec 19, 2010 3:01 PM
Edited by: Vighneswaran CE on Dec 19, 2010 3:11 PM

All of a sudden my iTunes stopped working, and I get the following error messages: 1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem and 2. iTunes was not installed correct

All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
Thanks

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192)

Error messages in ABAP program are stored in which table

hi all,
Can anyone tell
error messages in ABAP program are stored in which table??

Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
Fuction module for storing error messages ->'format_message'
for example...
data : v_message(100) type c.
call transaction NNNN mode A update S messages into it_messages.
loop at it_messages where msgty = 'E'.
call function 'format_message'
exporting
*it_messages details
importing
v_message.
write :/ v_message.
clear v_message.
endloop.
Anothe method - ->
Here is a sample of the program code for that:
LOOP AT it_messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = it_messtab-msgid
lang = it_messtab-msgspra
no = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
msg = g_msg
EXCEPTIONS
OTHERS = 0.
IF it_messtab-msgtyp = 'S'.
it_sucess-sucess_rec = g_msg.
it_sucess-lifnr = it_header-lifnr." Based on your field
it_sucess-tabix = v_lines.
APPEND it_sucess.
ELSEIF it_messtab-msgtyp = 'E'.
it_error-error_rec = g_msg.
it_error-lifnr = it_header-lifnr.
it_error-tabix = v_lines.
APPEND it_error.
ELSE.
it_info-info_rec = g_msg.
it_info-lifnr = it_header-lifnr.
it_info-tabix = v_lines.
APPEND it_info.
ENDIF.
ENDLOOP.

How to keep the field open for input with error message in report program

Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.

Hi...
you have to use the event:
AT SELECTION-SCREEN ON <FIELD> EVENT.
u have to give an error message in this event.
Consider the following Example:
PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.

in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
Regarding events:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
Regarding messages:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh....

Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.

Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.

If Photoshop crashes the should be a System crash report generated by your OS. For example Windows

Could not complete your request because of a program error" message when opening program

Hello,
Same here with the message and I'm on a brand new system:
new macpro, new mavericks, new photoshop CC and havent done a thing yet.
Tried all found solutions:
-generator on/off
-sniffer on/off
-GPU on/off
-300x exit prefs etc
-re-install PS
-list-view
-pushing my belly button
But nothing helps.
I tried a little work in PS (render/save etc) and that all seems to work
BUT....sniffer states:
2014-02-07 16:23:50.885 sniffer[522:303] invalid display
ContextOffscreen exception caught and ignored.
2014-02-07 16:23:50.886 sniffer[522:303] invalid display
ContextOffscreen exception caught and ignored.
And dont know what to do about it and/or if that causes it. Thank you. & regards

I was able to follow your directions and delete almost everything. I couldn't find a PSE 4 path folder. I deleted the com.adobe.Photoshop.Elements.plist and opera preferences. Repaired permissions and restarted computer.
Still had the same error message when trying to "Save As" a PSD to a jpg. I can save for the Web which is a jpg (but not good enough for printing.)
Maybe I'll reinstall.
I'm not having trouble with any other programs. Can't recall having added anything to PSE recently, though if this is the culprit, it might be something I did months ago (though I don't know what) because I haven't tried saving as a jpg in a long time.
I've been saving my documents as a tiff file. Could that be a cause? I've converted some of these tiff files to PSD and still get the error message.

Error message from originating program when clicking on weblink to open FF4

FF4 is now my default browser on my WinXP netbook. (Instead of FF3.6.)
If FF is not open and I click on a weblink in Outlook or other programs, FF4 opens the webpage but I also get an error message in the originating program saying the system cannot find the file. If FF4 is already open I do not get the error message. FF3.6 did not generate this error message even though it took significantly longer to open than FF4.

Hi Srikar,
It depends.
Generally though you display a message in SAPGUI it does not display automatically in BSP.
Some times you have to manually write some code to populate and display a message in BSP.
First you need to find the BSP page and write some code to display error messages in the same..
Regards,
Sreekanth

Error Message from BDC program

Hi all,
I'm facing the following situation: when i run a call transaction program for VL01:
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL TRANSACTION 'VL01N' USING bdcdata MESSAGES into MESSTAB.
sometimes when an item has no stock, i get the error message:
    MSGTYP = E
    MSGID = VL
    MSGNR = 643
    MSGV1 = '1'
    MSGV2 = 'UN'.
    MSGV3 = ''
    MSGV4 = ''
the problem: when i compose this message with FM - FORMAT_MESSAGE, i dont get the material code, to wich the loss os stock error referes to, since is not returned from call transaction execution (in messtab). How can i determine to which material code the error refers to ?
As anyone faced the same situation ?
   Best regards,
Pedro Castro

If you know the material number which you passed to the BDC, you can simply use that, if you are passing mulitple materials for one call of the BDC, then I don't think you can know which material it is erroring on if the message does not bring it back.
Regards,
RIch Heilman

Trying to open iTunes I got a error message of msvcr80.dll can not be found. I thought that it was an iTunes program problem. I tried reloading iTunes and then got an error message of a program is trying to acces a library file incorrectly. How can I reso

When trying to open ITunes, I got an error message of msvcr80.dll can not be found.
Assuming that it was an iTunes file, I reinstalled iTunes.
Trying to open again, I got an error message of an appication is trying to open a library file incorrectly.
How do I resolve this problem.
Neither my PC with Vista nor my my laptop with windows 7 will work?
Thanks

Hello Msvcr80.dll,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

I keep getting the itunes has stopped working error message and the program keeps closing itself everytime I atry to access the store

Every time that I attempt to open the store in my iTunes program, I receive and error message and it states ITunes has stopped working and needs to close the program. How do I fix this?

Restart your computer then try iTunes.

C7280 - Cannot scan. Error message says another program has control over the device

I opened the HP Device Manager to do a scan. I accepted the settings and the scan started. But part way through the scan, I stopped the scan as I realized that I wanted to change the resolution. I quit the Device Manager and restarted it but when I did, I got an error message saying:
"The function you have requested cannot be performed because another program has control over the device".
I don't have anything else open and so I can't work out what program has control over the printer.
C7280 Prtinter. Mac OSX 10.7.
This question was solved.
View Solution.

I was thinking that if you stopped the process in mid-scan that there may be some background processes still running. Rebooting usually stops those processes.
No, you will not have to do this each time. Next time, though, it may be easier to just let the scan complete and the do another scan at whatever setting you want.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Error message and refining program!

hI Im getting this error message
can anyone help on whats going wrong here?
any help appreciated
Paul
Enter the item part number: 10001
Enter the date of sales dd-Mmm-yyyy: 11-Apr-2003
Exception in thread "main" java.io.FileNotFoundException: 10001 (The system cann
ot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileReader.<init>(Unknown Source)
at week12.main(week12.java:27)
Here is the program and input files at bottom
import java.io.*;
import B102.*;
public class week12{
public static void main(String[] args) throws IOException{
int i;
int numrecords = 0;int index = 0;
int input_part = 0;
String line;
String str1, str2;
String stock;
String sales;
int partno[];
double price[];
String date[];
System.out.print("Enter the item part number: ");
stock = Keybd.in.readLine();
System.out.print("Enter the date of sales dd-Mmm-yyyy: ");
sales = Keybd.in.readLine();
System.out.print(" ");//This is only for spacing when printing to screen
BufferedReader infile1 = new BufferedReader(new FileReader(stock));
line = infile1.readLine();
numrecords = Integer.parseInt(line.trim());
price = new double[numrecords];
partno = new int[numrecords];
for(i = 0; i < numrecords; i++){
line = infile1.readLine();
index = line.indexOf(' ');
str1 = line.substring(0,index);//get part number
str2 = line.substring(index); //get price
partno[i] = Integer.parseInt(str1.trim());
price[i] = Double.parseDouble(str2.trim());
// close the file
try{
infile1.close();
//infile2.close();
}catch (IOException iox){
System.out.println("problem closing input file");
BufferedReader infile2 = new BufferedReader(new FileReader(sales));
line = infile2.readLine();
numrecords = Integer.parseInt(line.trim());
date = new String[numrecords];
for(i = 0; i < numrecords; i++){
line = infile2.readLine();
index = line.indexOf(' ');
str1 = line.substring(0,index);
str2 = line.substring(index);
date[i] = str2.trim();
// close the file
try{
//infile1.close();
infile2.close();
}catch (IOException iox){
System.out.println("problem closing input file");
PrintWriter outfile = new PrintWriter(new FileOutputStream("out.txt"));
//output contents of arrays
for(i=0;i<numrecords;i++){
outfile.println(partno[i]+" "+price);
System.out.println(partno[i]+" "+price[i]);
outfile.close();
//input file1 (stock)
10001 14.99 speakers
10021 5.99 mouse
10031 200.0 17"-Monitor
10041 215.0 Motherboard
10051 14.5 Keyboard
10061 1.1 mousepad
10071 199.99 desk
10081 15.49 floppydisk
10091 59.89 cdrom
10111 69.99 dvdrom
10221 479.99 dvdburner
10331 199.89 cpu
10441 180.0 harddisk
10551 139.0 gf4-440video
10661 59.99 pc2100-256m-ram
10762 213.44 printer
10871 6.99 printer-cable
10992 249.99 wireless-router-modem
//input file 2 (sales)
10-Apr-2003 10001 C00001 123 233.35
10-Apr-2003 10021 C00002 200 223.35
10-Apr-2003 10001 C00005 123 243.35
10-Apr-2003 10041 C00021 403 23.35
10-Apr-2003 10001 C00007 123 223.35
10-Apr-2003 10061 C00071 222 263.35
10-Apr-2003 10071 C00331 010 273.35
11-Apr-2003 10081 C00441 001 253.35
11-Apr-2003 10091 C00551 020 223.35
11-Apr-2003 10081 C00441 001 253.35
11-Apr-2003 10081 C00441 001 263.35
11-Apr-2003 10331 C03331 405 213.35
11-Apr-2003 10441 C04441 133 2333.35
11-Apr-2003 10081 C00441 001 252.35
11-Apr-2003 10661 C06661 155 253.35
12-Apr-2003 10762 C07771 166 263.35
12-Apr-2003 10871 C08881 177 293.35
12-Apr-2003 10992 C09991 175 203.35
12-Apr-2003 10762 C07775 165 269.99

It's saying that it can't find the file named "10001", which should be obvvious from the error message, in particular, this part: "java.io.FileNotFoundException: 10001 (The system cannot find the file specified)".
Considering that 10001 is apparently the item number, and your data file includes multiple items in a single file as so it's probable that an individual item number is not also the file name, it seems reasonable to expect that this exception would result from your program.

Error message in iCal program access to my email is not permitted.

I am having big trouble with iCal lately with multiple events and duplicate calendars proliferating. Someone was nice enough to give me something to put into Applescript to correct the problem. Now a new problem. When I enter an event and use iCal to notify other participants, I get a message that says:
The server responded with an error.
Access to account (my name and address) is not permitted.
The server responded:
“HTTP/1.1 403 Forbidden”
to operation CalDAVAccountRefreshQueueableOperation

Got to Ical, preferences, accounts. If you have a Mobile Me CalDav account listed, delete it. This is the source of the error message. Deleting this account will not interfere with mobile me syncing. (At least it didn't interfere with mine and the error message is now gone. Good luck.

Collect Error Message from SAP program to BSP Page

Hi Experts,
I am displaying an error message in the form of pop-up Message in a Screen based on a condition using BADI on R/3 screen , but when i am calling the screen from Portal (BSP PAge) I am unable to see the Error Message which is being displayed as a pop-up in r/3..
How to catch the error and display in BSP Page.....
I have searched the forum but didnt find any suitable replies....
Plz help
Regards,
Srikar

Hi Srikar,
It depends.
Generally though you display a message in SAPGUI it does not display automatically in BSP.
Some times you have to manually write some code to populate and display a message in BSP.
First you need to find the BSP page and write some code to display error messages in the same..
Regards,
Sreekanth

Error message in dialog programming

Similar Messages

Maybe you are looking for