Error message in distribution status of crmd_order

Hi All,
We are working on CRM 2007. After saving the transaction type in cRMD_ORDER the distribution status attribute in the status view is showing as "Error in distribution".
But still we can find the document being available in ECC.
Please help us in this issue.
Points will be rewarded liberally.
Thanks in advadnce,
RK

Have you applied Support Package 2? We had a similar error that was caused by a program error that got fixed with SP2.
We got the error in SAP Note 1128686 which is due to a program error that has a correction in the note and also included in the cumulative Support Package 2 (SAPKU60002).
After applying the SP, sales orders created in IC Web now are in status Distributed Open.

Similar Messages

Display error message in the status bar during PBO

Hi All,
I want to issue an error message on a program's selection-screen.
The thing is when I issue an error message inside PBO, all the text in the selection-screen are gone and replaced with lines.
So i displayed the error message in the status bar.
MESSAGE S074(Z4) DISPLAY LIKE 'E'.
But the problem with this is that it will allow to continue data processing.
What shall I do in order for my error message to behave as an error message and not as a status message?

Hi,
Write your message in PAI same as you have done MESSAGE S074(Z4) DISPLAY LIKE 'E'.
after this use call screen 'your screen no'.
it will not lock the field.

Display error message as as status message on the screen

Hi all,
How to display error message as as status message on the screen
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it leave the current transaction.
if i display success message and use display like 'E' it display the error message but if i save it save the transaction.
i cannot use leave to screen also because of subscreen. if i use leave to screen system display set screen not allowed in subscreen.
so i want to stop the processing or do not allow the transaction to complete on the message.

Hi
displaying error message like status message will help u?
try the below code
MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
cheers
shibu

Error message B1 357-Status records with status 51 after status 53

Hi All,
somebody knows why is can be caused this message:
''Error message B1 357-Status records with status 51 after status 53''
Thanks and best regards
L

Dear Luis,
Please Check
Status records with status 51 after status 53
Best Regards,
Amit

Error Message Displaying the status Bar not like popup message

Hi all,
My Requirement is while creating invoice if pricing conditons is repeted , system should thorough the error message like (uplicate Condition Types Are Not Possible in the status Bar but Im getting poup Error message So I want to display the same message in the status Bar.
Please Help me any one.
Regards,
Prathap

I dont want to Display the popup, I want to Display in Status Bar as a Error Message.
Like this .
If I put message type 'E' its Displaying popup message , MESSAGE ' Duplicate Condition Types Are Not Possible.' TYPE 'E'.
If I Put messge type 'I' its Displaying in Status Bar .
Regards,
Prathap
Edited by: giri prathap on Sep 13, 2011 12:35 PM

How do i pass the error message at header level in CRMD_order

Hi all,
i got one requirement like when i create/change the sevice order (CRMD_ORDER)
if net_value is more than 1000 i have to set the message 'E' like 'order is blocked'
else 'approved' at header level before going to save the order.
please help me out it is high priority and as i am new to CRM.
thanks in advance.
Thank you,
Madhu.

Anil
You have to look for a BADI to add the Error Message.
Also use the FM CRM_MESSAGES_DISPLAY to display the message !
Thanks
<b>Allot points if this helps!</b>

Why are we seeing the error message Forms Distribution Aborted?

We have been using Acrobat for years on a Windows XP platform, and now for the past 3 months, Acrobat XI on a Windows 7 Professional platform, creating distributed forms with no issue. In the last week or so we're seeing an error message indicating the Form distribution has been aborted, with an indication that the form is open with another user. It suggests to save as a different name or in a different folder. Saving as a different name doesn't resolve the issue, but saving it to a different folder does resolve the issue and the distribution completes properly. What would have changed and what do we need to do to eliminate saving to a different folder?
Thanks,
Randy

Holsome1
I’m sorry to hear about the trouble with your MMS! I’d love to get this fixed. How long has this been going on? What location are you in? Are there any areas it does work for you? All contacts?
YosefT_VZW
Follow us on Twitter @VZWSupport

How to Show String Error Message in SAP status bar?

Hello All,
I am doing some custom check in SBO_SP_TransactionNotification and Setting
   SET @error = -1
   SET @error_message='Duplicate Web Order ID'
   select @error, @error_message
But in SAP interface it is only showing -1 in status bar, I could not show error_message in status bar. How it could be achieved.
Thanks in advance

Hi
try this
SET @error = 1
SET @error_message='Duplicate Web Order ID'
select @error, @error_message
Regards
Arun

Can't get online. Error message says current status is "offline." I uncheck "offline" in the File Menu but it goes back offline again immediately and will not stay in online mode..

'''bold text'''

Thanks for the response. Unfortunately, things have gotten progressively worse now in another direction. After I posted this, I shut down my computer to go to work. It had to "rebuild" the filevault sparseimage to recover space.
Now when I restarted it, I am missing things from my dock, ? marks are in their place, all of my preferences have been set to some default AND this is the biggie - I have no mail accounts whatsoever. When I click on Mail, it asks me if I want to establish a new account. It looks like the FileVault action has totally screwed up my system.
I tried rebuilding the permissions as recommended above using safe boot. Didn't help. I am now trying to repair the FileVault sparseimage as recommended elsewhere. I think I now see what the problem might be. I have two different sparseimages for the same account with the only difference is that a 1 is appended to the second one. Unfortunately I can't tell which it is. I have a feeling I should repair the 1st one (without the suffix 1). It must not be able to open that and hence that is why it made a second one.
Any other help anyone?
Nick

Trying to upgrade to Mountain Lion, error is message; " product distribution file could not be verified. It may be damaged or was not signed"

trying to upgrade to Mountain Lion, error message; " product distribution file could not be verified. It may be damaged or was not signed" ??
what to do? This is in App store. I followed the link e-mailed to me that an upgrade was available....... Puzzled.

Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
Step 1
Back up all data.
From the menu bar, select
 ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 2
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 3
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message in ME21N and ME22N

Dear Friends,
I am facing one problem... my requirement is at the time of saving purchase order i need to check some thing and if that check fails i need to display the error message and needs to stop the creation of purchase order. That error message at the status bar also ok and pop up also ok. But when i try to display that error message in one exit 'EXIT_SAPMM06E_012' then the eror message is not coming properly.. i mean it is displaying one box under that one red symbol and in the message comming my message class name. I could not able to display the proper error message in proper way.
I have tried one BADI also post save method that is displaying error message properly but immediately after that i am getting one more pop up saying system error with POST_METHOD some thing like that. I haVe checked in debugging that second error message is displaying from the standard program (message class : ME and number 816) but i dont want that second pop up. How to skip that and how to provide proper error message.
Any help will be highly appreciated.
Thanks a lot in advance,

Hi,
here is the sample of the code we have used in our system.
restrict logic based on Document Type and Company Code
IF i_ekko-bsart EQ c_ub AND i_ekko-bukrs EQ 'XXXX'.
loop at Line Items of PO
LOOP AT tekpo WHERE loekz EQ space.
if Receiving Plant is YYYY and Storage Location is NULL
    IF tekpo-werks = 'YYYY' AND
       tekpo-lgort = space.
    issue error message
      MESSAGE ID 'ZM' TYPE 'E' NUMBER '042' WITH
          tekpo-ebelp                               "line item
          tekpo-werks.                              "receiving plant
    ENDIF.          "receiving plant/storage location
ENDLOOP.
ENDIF.          "document type
Hope this helps.
-Ramesh

Error Message when LOV contains no entries

Hello,
I am using Oracle and Forms 10g. I have the following problem.
I have a textfield with a WHEN-MOUSE-CLICK trigger that displays a LOV.
I want when the LOV contains no values to see an error message on the status bar below only. My problem is when I click again on the textfield an error message displays saying that the LOV contains no values.
What I want, is to display the error message on the status bar ONLY and not on a message.
I have tried to do it by setting the :System.Message_level but this method also deletes the message on the status bar.
How can I solve my problem?
Thank you very much

Hello,
If you know the corresponding error message number, you can addd a ON-ERROR trigger on the item that supports the LOV, then trap this message and display yours with the Message( '', no_acknowledge) built-in.
Francois

How to display the error message on screen in display mode

Hi all,
How to display error message as as status message on the screen(module pool).
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it lives the current transaction.
Thank you!
Prasad

Hi,
Try as below.
MESSAGE IXXX DISPLAY LIKE 'E'.
LEAVE TO SCREEN XXXX.
After displaying the information message like E, leave to the screen you want to navigate or can also navigate to the transaction required.
Regards,
Nangunoori.

Need to find the way to get the actual error message in the alert log.

Hi,
I have configured OEM 11G and monitoring target versions are from 9i to 11g. Now my problem is i have defined the metrics for monitoring the alert log contents and OEM is sending alert if there is any error in the alert log but it is not showing the actual error message just it is showing as below.
============================
Target Name=IDMPRD
Target type=Database Instance
Host=oidmprd01.ho.abc.com
Occurred At=Dec 21, 2011 12:05:21 AM GMT+03:00
Message=1 distinct types of ORA- errors have been found in the alert log.
Metric=Generic Alert Log Error Status
Metric value=1
Severity=Warning
Acknowledged=No
Notification Rule Name=RULE_4_PROD_DATABASES
Notification Rule Owner=SYSMAN
============================
Is there any way to get the complete error details in the OEM alert itself.
Regards
DBA.

You need to look at the Alert Log error messages, not the "status" messages. See doc http://docs.oracle.com/cd/E11857_01/em.111/e16285/oracle_database.htm#autoId2

Had firefox on my computer but was using IE8 as browser. uninstalled mozilla as keep getting error message when trying to share Times article to fb which mentions mozilla but it is still happening

I only use IE8 as my browser but had mozilla firefox installed on computer too. For about a month now have been unable to share NY Times articles to facebook. When I click on "recommend to facebook" I get an error message in the status bar that mentions mozilla. I uninstalled mozilla firefox but this is still happening. I contacted The NY Times but they are unable to replicate the problem and suggested contacting mozilla.

I only use IE8 as my browser but had mozilla firefox installed on computer too. For about a month now have been unable to share NY Times articles to facebook. When I click on "recommend to facebook" I get an error message in the status bar that mentions mozilla. I uninstalled mozilla firefox but this is still happening. I contacted The NY Times but they are unable to replicate the problem and suggested contacting mozilla.

Error message in distribution status of crmd_order

Similar Messages

Maybe you are looking for