Error message in dreamweaver
After starting up dreamweaver I get the following error messages.
then I click on oke, the follwing error appears,
After closing dreamweaver the third error appears
Can anyone tell how to solve this problem and does anyone know what caused it.
thanks for the help,
John
Did you check the Dreamweaver FAQ before posting this question? The answer is in JavaScript and other unexpected errors.
Similar Messages
-
Error message in Dreamweaver CS4
Hi all,
I wonder if anybody can help me. I've recently purchased Web
Premium CS4, and I've started to get an error message in
Dreamweaver.
The message reads as follows: "A script in file C:\Program
Files\Adobe\Adobe Dreamweaver
CS4\Configuration\Shared\Common\Scripts\dwscriptsExtData.js has
been running for a long time. Do you want to continue?"
When I click 'yes', the message disappears, and then
reappears immediately. If I click no, I get another error message,
after which the original error pops back up.
This is starting to annoy me! I only purchased last week!
Any ideas?
ThanksNeil_Page wrote:
> Hi all,
>
> I wonder if anybody can help me. I've recently purchased
Web Premium CS4, and
> I've started to get an error message in Dreamweaver.
>
> The message reads as follows: "A script in file
C:\Program Files\Adobe\Adobe
> Dreamweaver
CS4\Configuration\Shared\Common\Scripts\dwscriptsExtData.js has
> been running for a long time. Do you want to continue?"
>
> When I click 'yes', the message disappears, and then
reappears immediately. If
> I click no, I get another error message, after which the
original error pops
> back up.
>
> This is starting to annoy me! I only purchased last
week!
>
> Any ideas?
>
> Thanks
Sounds like an extension may be incompatible with CS4. Turn
them all off
and see if that helps. Then turn them back on one by one.
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html -
Have repeating error messages in Dreamweaver 5.5. under Mac Os 10.6.8
Hi,
wanted to start to work and get familiar designing websites with my "old" dreamweaver.
Every time I try to start or to use Dreamweaver's menus (new file, save as, etc) I receive the following error message:
The following Javascript error(s) occured:
Unable to open script file "Macintosh
HD: Application: Adobe Dreamweaver
CS5.5: Configuration: Shared:MM:Scripts:
CMN:TemplateUtils.js" (error 2)
I tried all the troubleshooting tips, but it didn't work.
Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Has anybody a tip for another solution or how to proceed? Basically I don't want to update yet on CC.
Thanks a lot for any help.
Ute
error messageHi Ute,
This document Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6 provides information on troubleshooting DW JavaScript errors.
Thanks,
Preran -
Error message in Dreamweaver Cs6
Dreamweaver gave my the following error message: This page contains some SWF objects that may not work properly in the most recent versions of Internet Explorer. Dreamweaver cannot convert them to the new SWF markups. Please delete each of them and insert again. It works fine in firefox and chrome. But most of our viewers use IE so I need it to work in there.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Workforce Investment Board of Southeast Missouri</title>
<meta http-equiv="Content-Type" content="work, job, careers, employment, Missouri, workforce development, employer, unemployment text/html; charset=utf-8" />
<link rel="stylesheet" href="mm_spa.css" type="text/css" />
<script src="SpryAssets/Spryvalidationtextarea.js" type="text/javascript"></script>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="spryAssets/Spryvalidationtextarea.css" rel="stylesheet" type="text/css"/>
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<style type="text/css">
.style4 {
font-size: 18px
.style5 {font-size: 16px}
.style6 {
color: #990000
</style>
</head>
<link rel="stylesheet" href="mm_spa.css" type="text/css" />
<link href="styles.css" rel="stylesheet" type="text/css" />
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<body>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9.0.0.0" name="sf" width="720" height="540" align="top" ID="sf" VIEWASTEXT>
<param name="movie" value="WIBflash/WIBflash.swf" />
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="allowScriptAccess" value="always" />
<param name="allowFullScreen" value="true" />
<embed src="WIBflash/WIBflash.swf" width="720" type="application/x-shockwave-flash" height="540" quality="high" name="sf" allowScriptAccess="always" allowFullScreen="true" pluginspage="http://www.macromedia.com/go/getflashplayer" align="top"></embed>
</object></noscript>
</div>
This is a copy of the flashintall log:
2013-9-25+3-53-17.177 [error] 1223 1053
=O====== M/11.8.800.175 2013-09-29+20-05-10.901 ========
0000 [I] 00000010 "C:\Users\Phyllis\AppData\Local\Adobe\AIH.f9b49face1887753af95db2a882987555f3f44b2\instal l_flash_player_ax.exe" -install -iv 8
0001 [F] 00001041
=X====== M/11.8.800.175 2013-09-29+20-05-12.413 ========
=O====== M/11.8.800.175 2013-09-29+20-07-28.199 ========
0000 [I] 00000010 "C:\Users\Phyllis\AppData\Local\Adobe\AIH.f9b49face1887753af95db2a882987555f3f44b2\instal l_flash_player_ax.exe" -install -iv 8
0001 [F] 00001041
=X====== M/11.8.800.175 2013-09-29+20-07-29.361 ========
=O====== M/11.8.800.175 2013-09-29+20-07-33.671 ========
0000 [I] 00000010 "C:\Users\Phyllis\AppData\Local\Adobe\AIH.f9b49face1887753af95db2a882987555f3f44b2\instal l_flash_player_ax.exe" -install -iv 8
0001 [F] 00001041
=X====== M/11.8.800.175 2013-09-29+20-07-34.788 ========
=O====== M/11.8.800.175 2013-09-29+20-07-58.056 ========
0000 [I] 00000010 "C:\Users\Phyllis\AppData\Local\Adobe\AIH.f9b49face1887753af95db2a882987555f3f44b2\instal l_flash_player_ax.exe" -install -iv 8
0001 [I] 00000011 1
0002 [I] 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0003 [I] 00000013 C:\Windows\SysWOW64\Macromed\Flash\Flash32_11_8_800_175.ocx
0004 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_8_800_175_ActiveX.exe
0005 [I] 00000016 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_8_800_175_ActiveX.dll
0006 [I] 00000023 C:\Windows\SysWOW64\Macromed\Flash\activex.vch
0007 [I] 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0008 [W] 00001024 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl 183
0009 [W] 00001024 C:\Windows\SysWOW64\FlashPlayerApp.exe 183
0010 [I] 00000021 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
0011 [W] 00001106
0012 [W] 00001106
0013 [W] 00001024 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe 183
0014 [I] 00000012
=X====== M/11.8.800.175 2013-09-29+20-08-13.725 ========
Please help, if I need anything else please let me know. [email protected]
ThanksFlash content is no longer suitable for the web as it can not be viewed on most handheld devices like phones and pads.
It's time to convert those flash movies into slideshows -
Error Message in Dreamweaver MX
Hi can someone kindly help me please. I'm just building my
first Web Site and can't put images on it the error message i'm
getting is Unable to create remote folder Assets, 550 create
directory operation failed in Dreamweaver mx what have I done wrong
any help would be appreciated.When do you get this error?
Have you defined a site?
When you look at the site name in the list of sites on the
Files panel, do
you see a folder icon to the left, or two networked
computers?
Are you using Dreamweaver MX 6.0 or 6.1?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"devonguy" <[email protected]> wrote in
message
news:gnv2pb$5qq$[email protected]..
> Hi can someone kindly help me please. I'm just building
my first Web Site
> and
> can't put images on it the error message i'm getting is
Unable to create
> remote
> folder Assets, 550 create directory operation failed in
Dreamweaver mx
> what
> have I done wrong any help would be appreciated.
> -
Javascript error message loading dreamweaver mx
this may be two different questions but here goes:
-- i downloaded the interakt kollection a while back and just
got time to use it. by now i noticed that a newer version was
available so i downloaded it. but it crashed my machine trying to
update. and an error message now comes up about a javascript error
trying to load one of the interakt files. i put the system back 24
hours but the same error comes up. i click okay and dreamweaver mx
continues, but what does it mean?
-- i'm just starting php programming and perform the simplest
function, saving a .php site in apache2\htdocs and a file within
the site. but when i try to run the php from the livedata view, i
get a http 404 message about the doc not found. no wonder: the doc
is not the one i saved, but has a longer file name. tried this a
couple of times with different file names and the same thing
happens. suggestions please.
thanks,
michaelMichael
You may need to uninstall and then reinstall DW &
Interakt. The issue that
you are probably running into is that Interakt changed some
of the DW files
which worked until the DW 8.02 update came out, and rewrote
those files. The
Interakt updater probably relies on finding the updated DW
files.
When you preview a file DW creates a temporary version of it,
and runs that,
and then deletes it. You can not reference these temporary
versions in any
other way.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"hconnorjr" <[email protected]> wrote in
message
news:ef9hkr$5ac$[email protected]..
> this may be two different questions but here goes:
>
> -- i downloaded the interakt kollection a while back and
just got time to
> use
> it. by now i noticed that a newer version was available
so i downloaded
> it. but
> it crashed my machine trying to update. and an error
message now comes up
> about
> a javascript error trying to load one of the interakt
files. i put the
> system
> back 24 hours but the same error comes up. i click okay
and dreamweaver mx
> continues, but what does it mean?
>
> -- i'm just starting php programming and perform the
simplest function,
> saving
> a .php site in apache2\htdocs and a file within the
site. but when i try
> to run
> the php from the livedata view, i get a http 404 message
about the doc not
> found. no wonder: the doc is not the one i saved, but
has a longer file
> name.
> tried this a couple of times with different file names
and the same thing
> happens. suggestions please.
>
> thanks,
>
> michael
>
> -
CSS error message in Dreamweaver CS4
I have an message that says"Found 1 errors in tinaswebsite.css" and "Affects: Firefox 1.5, 2.0, 3.0; Internet Explorer 6.0, 7.0, 8.0b1; Internet Explorer for Macintosh 5.2; Opera 8.0, 9.0; Safari 2.0, 3.0." How do I know what the error is and how do I fix it?
Well, I pointed this out a few days ago and got beaten to a pulp. I kinda like the abuse.
Kath-H wrote:
But surely people start here: -
Getting error message in dreamweaver while pasting
Hi,
I am getting this error while I am trying to do the copy
paste function in Dreamweaver 8.
While
executing DWShortcuts_HTMLSource_Paste command in menus.xml, the
following JavaScript error(s) occured: TypeError: MM.event has no
properties
Pls Help...... Regards.Find and delete
Application Data\Macromedia\Dreamweaver 8\Configuration\WinFileCache-CB42E5FF.dat
No need to wipe your whole config or reinstall. -
I have an error message in dreamweaver that doesn't permit me to preview in firefox.
Unable to launch Macintosh HD:System:Library:Automator:LaunchApplication.action:Contents:Resources:no.lproj.:main.ni b. Please be sure that this application exists and that there is enough memory to run it.
The source of the bug is determined that Firefox 3.6.x is the cause and not Dreamweaver. See the following page for reference:
https://bugzilla.mozilla.org/show_bug.cgi?id=549680
It appears the bug was resolved as of this past Wednesday and there is a unsupported patch on that page as well. You can typically expect that to be in the next patch for Firefox. Until then you can use another browser or test in Firefox by launching Firefox and loading your testing server manually. -
Editingutils.js error message dreamweaver cs4
I keep getting this the attached error message using Dreamweaver CS4, spry framework utilizing a number of spry widgets.
CollapsiblePanels
Spry Forms Widgets
I have made changes to the span id names associated with each of the form widgets.
I've reviewed this link http://kb2.adobe.com/cps/401/kb401257.html
However the files described do not contain the following lines and changes
Edit SpryTabbedPanelsDesignTime.js and make the following changes:
THIS DOES NOT EXIST IN THE FILE IN CS4
Go to line 188. Change:
eval("opts = " + args[ 1 ]);
to:
try { eval("opts = " + args[ 1 ]); } catch(e) { opts = null; }
Save the file.
Edit SpryCollapsiblePanelDesignTime.js and make the following changes:
THIS DOES NOT EXIST IN THE FILE IN CS4
Go to line 188. Change:
eval("opts = " + args[ 1 ]);
to:
try { eval("opts = " + args[ 1 ]); } catch(e) { opts = null; }
Save the file.
Launch Dreamweaver and verify that you can now load your file.
Any other solutions?I have resolved the editingutils.js by breaking up the forms, but it is not the solution I'm really looking for.
Each of the 6 forms on seperate pages are 450 lines of code.
Form sample.
http://irexs.com/betatest001/can/listCANCommercial.cfmhttp://www.irexs.com/betatest001/
I want to be able to have multiple forms on one page, nested in spry collapsible panels.
I'm using DW CS4 and Coldfusion 8 server, forms utilize SPRY form fields (not cfforms).
In order to reslove the editingutils.js I had to break up the forms, but have considered an alternate solution.
In each panel the forms are nested via cfinculdes; structure as follows.
<div col panel>
<div col panel content>
<form spry fields>
<cfincludes location form file>
<cfincludes details form file>
<form end>
<dev col panel content ent>
<div col panel end>
WHAT I WANT TO ACCOMPLISH is as follows.
Sample page
http://irexs.com/betatest001/can/listCAN.cfm
Forms are to be inserted in the panel content section as described above.
ISSUES ARE:
I have limited JavaScript knowledge.
For the forms to work i require the the panels in closed state at page load: This is done.
ON FORM SUBMIT, I need the panel to stay OPEN, when client side or server side submit requires correction to the form.
What happens now is the page refreshes and the panel closes: the default state.
SOLUTION DESIRED, is to have the selected panel to stay open and the input information to remain when form is submitted.
Thanks for any help. -
ERROR MESSAGE Can't open file in DW8
After downloading Dreamweaver 8 trial version.
Download was sucessful. Installation was successful. I opened the
program to proceed to build a webpage. I was able to open a HTML
file. and I was UNABLE to open any image file... I attempt to open
jpg file... I get error message saying Dreamweaver can't open jpg
file Please open HTML, XML or other compatible files. When I
attempted to open a gif file ... another error message same but for
gif in place of jpg. I checked the other programs and other
programs did not have the same problem. I was able to open file
from Internet Explorer or WS FTP. but NOT in Dreamweaver. IT is the
only program that I am not able to open ANY of the image files. I
am not able to continue to evaluate this version before deciding
whether it is what I would like to order. I have heard many good
things about it so I wanted to give it a try but no... I did not
get a good start. I need advise what to do about it. Thank you. A
quick reply will be greatly appreciated.Are you trying to open a .jpg file directly in Dreamweaver?
Or are you
trying to insert an image into your page?
Dreamweaver is not an image editor so the former would not
work.
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"12345xy" <[email protected]> wrote in
message
news:e3vot6$hnq$[email protected]..
>
After downloading Dreamweaver 8 trial version.
Download was
> sucessful.
> Installation was successful. I opened the program to
proceed to build a
> webpage. I was able to open a HTML file. and I was
UNABLE to open any
> image
> file... I attempt to open jpg file... I get error
message saying
> Dreamweaver
> can't open jpg file Please open HTML, XML or other
compatible files. When
> I
> attempted to open a gif file ... another error message
same but for gif in
> place of jpg. I checked the other programs and other
programs did not have
> the
> same problem. I was able to open file from Internet
Explorer or WS FTP.
> but
> NOT in Dreamweaver. IT is the only program that I am not
able to open ANY
> of
> the image files. I am not able to continue to evaluate
this version
> before
> deciding whether it is what I would like to order. I
have heard many good
> things about it so I wanted to give it a try but no... I
did not get a
> good
> start. I need advise what to do about it. Thank you. A
quick reply will
> be
> greatly appreciated.
> -
New user working on my first web site, using MX 2004, v 7.01.
When I try to drag and drop a jpg from my files panel group
to a web page htm file I get the following error message.
Dreamweaver can’t open .jpg files. Please choose an
HTML, XML, or other compatible file.
Not sure what the problem is. The only thing I can think of
is the jpeg was originally created and saved using Corel photo
paint.It works to option click and download but does just clicking on it open it in a new window? I am receiving complaints from people trying to open it. .. thanks for checking!
-
Translators not loaded Error message
I have run into the following error message in Dreamweaver 8.
" The following translators were not loaded due to errors-asp.htm:
has configuration information that is invalid. I also received this
error for CFM.htm. Checking the web this appears to be a common
error. Some have corrected it by coping and pasting a new version
of the .htm document into the translators folders. Worked for me on
CFM.htm but still get the error for ASP.htm. Have gone back to 2004
for the error pops up (3 times) anytime you open a page.Try #`4 on this page:
http://kb2.adobe.com/cps/191/tn_19105.html#dat
if that does not help, try #12.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia -
I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html
Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium -
Error message: "Dreamweaver can't open .jpg files"
I'm using DW 8, and I have installed the 8.0.2 update. I'm
having trouble inserting certain JPG images into a site. I get an
error message pop-up that states "Dreamweaver can't open .jpg
files". It will allow me to insert some jpg files, but not all of
them. I've tried drag & drop and going through the Insert menu.
The files are not large at all. Doesn't appear to be any problem
with png's or gif's. It's incredibly frustrating. Anyone have any
suggestions? TIA.> why was i taught that all my web images need
> to be in 72dpi if it doesn't really matter?
most people suggest 72 because it was an old standard with
the early
macintosh DTP programs. For web use it's easier to
standardize on it because
when you make an image, you have to put ~some~ number in the
resolution box
and it might as well be 72 as any other number. It simplifies
moving image
files around in different applications if they are all the
same resolution.
For display in a browser, these will all have the same file
size and display
size in a web page:
600x600 pixels at 1dpi
600x600 pixels at 72dpi
600x600 pixels at 6000dpi
It's when they are used in other applications or when a
direct url like
/photos/1.jpg is printed out that they may display in the
resolution, not
the pixel dimension.
I came across a page once where the designer always saved his
images with a
resolution of 6000 dpi or some other odd number because he
thought that if
people dragged the image off the page to save it- most of
them wouldn't be
able to resize it. or some other idiot reason maybe.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/
Maybe you are looking for
-
When I noticed that my g5 was starting to smell I checked the back to find it was very warm. I took the back off and the (what I'm guessing) transformer was hot. The fans and vents looked clean and were not noisy. Maybe the transformer is supposed to
-
Create XML from oracle table if not null
Hello dear community, I have a problem by creating an XML file in oracle and hope you could help me. What I have is an table named "description" with three rows there: person varchar2(50) adress varchar2(50) Nr number Reading this table I am going to
-
Right button woes with mighty mouse
I have found that the right button on my mighty mouse quite frankly isnt very good. The mouse only detects i have clicked the right button when my left finger is completely lifted off the left mouse button, if it is merely resting on the left hand bu
-
SAP IDM 8.0 Provisioning of group privilege assignments
Hi, I set up Active Directory as a target system. I imported the new packages for Eclipse and did the initial load for AD (System privileges were created). When I assign the PRIV:AD:ONLY privilege to an identity, the identity gets provisioned to AD.
-
Camera Profile Default in LR2--Problems
I downloaded the camera profile betas and Camera Raw 4.5. When working with a Nef, I set a beta camera profile in LR2. No problem. When finished I open another NEF--same thing. Reverts to 4.4 default. Is there no way to make that sticky? Also, each t