Error Message in EoL/EoS Report
currently running LMS 3.2 get the following error message when running the Eol/Eos report: under reason for failure get unable to get data from Cisco.com try again later. using the same login that is used to login to Cisco.com.
The online version of this report is currently broken. We have been working to fix it for a while now, but unfortunately, I do not have an ETA. The workaround is to use the offline report mode, and download the data from http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme .
Similar Messages
-
LMS 3.1 - Unable to run EOL/EOS reports from CCO or Locally
Unable to run the EOL/EOS reports in RME 4.2.0 LMS 3.1 (Windows)
Jobs fail with message saying connection problems with CCO. (Proxy and CCO settings are correctly filled out)
Tried to run the reports using the local data source option but am unable to download data files from CCO as the links given in online help (and a different link on CCO documentation) do not work.
This is the documentation from online help:
1. Use a server other than LMS server with internet connection as the external server.
2. From this external server, access the following link to download the text file with XML data:
http://www.cisco.com/cgi-bin/front.x/eox/RME_PSIRT_DETAILS.pl?action=download
Ensure that you are a Registered User to access the above link. If you are not a Registered User, you can use the same link to register.
3. After downloading the text file with XML data to the external server, copy this file from the external server into the LMS server under:
NMSROOT\files\rme\jobs\inventory\reports\EOX_PSIRT\local_xml
The text file with XML data, PSIRT_EOX_OFFLINE.txt gets saved under local_xml folder.
The link mentioned in the instructions does not lead to any PSIR or EOX data.See this thread:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd4dd24 -
Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
JerelHi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya -
When trying to import music files I get an error message Thea says "importer reported a generic error". Also when editing video, screen views look great but when I transfer to PC or flash drive video quality is very poor. Any suggestions?
chansen232
Premiere Elements 13 on Windows 7 (presumed 64 bit).....
1. Music files and error message...are these music files from iTunes? If so, convert them to .wav in iTunes to convert them to wav version, and then import the .wav version into Premiere Elements 13 project using Premiere Elements 13 Expert workspace's Add Media/Files and Folders/Project Assets from where you drag the wav version to the Soundtrack.
The following are the instructions for the iTunes converting
http://support.apple.com/en-us/HT1550
If any problems with the instructions, please let me know, and I will go through them with you.
2. How you set up the project and the export settings that you select greatly influence your end product result.
a. What are the properties of the source media?
b. What project preset did you (manually) or the project (automatically) set to match the properties of the source media.
(If you do not know, please tell us what you see for the readings of Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio - even
if the fields look grayed out.)
c. For your export...Publish+Share/Computer/and then what? And what preset? Did you use the default settings of the preset or did you
customize the export settings of the preset under the preset's Advanced Button/Video Tab and Audio Tab?
Let us start here and then decide what next.
Thanks.
ATR -
Error Message in CRM Interactive Reporting
When launching the report "Sales Pipeline Analysis", the error message below appears. All other reports are working fine.
Service cannot be reached
What has happened?
URL http://sapcicrp.pdccons.local:8000/sap/bw/Bex call was terminated because the corresponding service is not available.
Note
■ The termination occurred in system CRP with error code 403 and for the reason Forbidden.
■ The selected virtual host was 0 .
Do you know the cause of this error ?
Thanks in advance for your help !Hi Joaquin,
Apparently, that service was not activated. After activation and running the report again in the UI, I had another error message (browser error) :
Accessing iFrame - Error name: TypeError. Error message: Object doesn't support property or method 'SAP_BW_URL_Get'
Other information on that screen :
protocol ==> http
hostname ==> sapcicrp.pdccons.local
port ==> 8000
path ==> /sap/bw/Bex
parameters ==> &TEMPLATE_ID=0TPLB_0CSALMC02_Q010_1
starturl ==> http://sapcicrp.pdccons.local:8000/sap/bw/Bex?CMD=LDOC&sap-language=E&TEMPLATE_ID=0TPLB_0CSALMC02_Q010_1&SNIPPET_OPERATIONS=
Kind Regards,
Els -
Too much errors/messages in Web Analysis reports stops workspace
Too often workspace stops to work for the client with the following (example) messages. It seems that too much informational and error messages from reports (like a non working report link or missing member) gives the workspace client so much trouble that login off or closing the browser is the only solution. This seems not the right workaround. Anyone experiencing the same?
Internet Explorer popup:
Line: 2608
char: 4
Error: 'undefined'is null or not an object
Code: 0
URL: https://[workspaceserver]/workspace/index.jsp
{next}
Internet Explorer popup:
Line: 2688
char: 3
Error: 'undefined'is null or not an object
Code: 0
URL: https://[workspaceserver]/workspace/index.jsp
In a Hyperion(r)Workspace-error popupscreen:
An error was encountered while closing all content
Can only remove children
Internet Explorer popup:
Line: 1385
Char: 4
error: 'this.leftComp.getDataModel()'is null or not an object
Code: 0
URL: https://[workspaceserver]/workspace/index.jspit seems that all errors are related to the migrated anaqlyzer report. In the new 931 version less characters are allowed to use than the old 71 version.
In the main name of the reportgroup the migration just rplaces the wrong characters. But links and url insite reportgroups and reports are not changed during migration. Activating (clicking on it) such links is the main cause of the freeze. -
Error Message when Scheduling a report in Infoview
I have created a report in Crystal Report using the Universe. Report is saved to the Enterprise and set up to schedule in Infoview.
When the report is scheduled for now or any other "when" time, I receive the error message:
"Error in File C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\tfcu-fics.reportjobserver\~tmp58860bbee30730.rpt: Unable to connect: incorrect log on parameters."
Currently running CR Version - 11.5.0313
BOE Version - 11.5
On my workstation - the ODBC connection, System DSN, for crystal is using the Adaptive Server Anywhere 9.00 driver - have no issues creating the report from the Universe.
On the server the ODBC connection, System DSN, for crystal is using the SQL Anywhere 10 driver. Would using the SQL Anywhere 10 driver create the error message above?
To test this I changed the workstation System DSN connection for crystal to SQL Anywhere 10 and when trying to refresh a report created from the Universe I kept receiving the ODBC Login window asking for the database password.
Is there an issue with SQL Anywhere 10 and a Universe not holding the database username or password?Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know. -
Error message when displaying a report in a windows form
Hi,
use Cr 2008.SP3 Fixpack 3.5,
Visual Studio 2008 prof. editon version 9.0.30729.1 SP,
:NET Framework 3.5 sp1
vb.net 2008
when displaying a report in a Windows form sometimes the following error message appears
System.NullReferenceException: Object reference not set to an instance of an object
bei CrystalDecisions.Windows.Forms.PageControl.OnMouseMove(MouseEventArgs e)
bei System.Windows.Forms.Control.WmMouseMove(Message& m)
bei System.Windows.Forms.Control.WndProc(Message& m)
bei System.Windows.Forms.ScrollableControl.WndProc(Message& m)
bei System.Windows.Forms.ContainerControl.WndProc(Message& m)
bei System.Windows.Forms.UserControl.WndProc(Message& m)
bei CrystalDecisions.Windows.Forms.PageControl.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
The rest of the error message is in german:
************** JIT-Debuggen **************
Um das JIT-Debuggen (Just-In-Time) zu aktivieren, muss in der
Konfigurationsdatei der Anwendung oder des Computers
(machine.config) der jitDebugging-Wert im Abschnitt system.windows.forms festgelegt werden.
Die Anwendung muss mit aktiviertem Debuggen kompiliert werden.
Zum Beispiel:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
Wenn das JIT-Debuggen aktiviert ist, werden alle nicht behandelten
Ausnahmen an den JIT-Debugger gesendet, der auf dem
Computer registriert ist, und nicht in diesem Dialogfeld behandelt.
Thank you
OttoCan you define "sometimes" a bit more?
Is it after a number of runs of a report?
Is it on a particular report?
Is it after you do certain operations on the report (paging, zooming, dill down, print, etc., etc.)?
Can you duplicate the issue if you isolate the report to a new test app?
Did you happen to notice if the issue existed prior to FP 3.5?
Is this on your dev computer or a client computer?
OS?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
How to show a error message to user from report.
I don´t wanna to go in a form builder to create a simple form for just two inputs.
I have put two inputs into reports parameter screen, but I know that reports is not like forms, I cannot use SET_ITEM_PROPERTY to hide an element or put a runtime message to a label.
How can I show an error message when I validate an input from user, when some input trigger raise?
Thanks a lot!The SRW.message doesn't show me no alert on report 10g !!!
is there any restriction that can be made to block the displaying of the alert on the web environnement?
thanks.. -
Unknown Error Message when creating Visual Reports
I get the Unknown error message periodically when trying to create an excel cash flow report. I am running Excel 2010, and Project 2010.
Very frustratingHi Jim,
Are you able to view other reports without any issues.
Is the happening only on this project?
Also, Please let me know the project professional patch.
Thanks,
Phani -
Error message when executing a report through a VB application
Hello,
I have a problem when I want to launch a Crystal Report 10 report in a Visual Basic application.
I created a report using "Add a command" to add a SQL query to this report, the report is working well when I launch it in Crystal Report. But when I launch it in the application I get an error message "The table 'Command' could not be found".
(Other reports are working in VB when I create a report whitout the sql command tool)
How can I do to make this working through VB ?
This application uses a sql server 2005 database.
Thank's in advance for your help,
RégisThank's for your answer, yes I'm connecting through an ODBC connection, yes the VB app is running the same odbc entry.
When I have only a "normal" link to a table the report is working well, the problem is that when I add a sql command in this report, the VB application thinks it's a "normal" sql table and it gives me the error message. The VB application didn't recognize that the table command in the report is a sql request. I don't know what's the difference between executing this report directly in CR or in the VB application, the report didn't react in the same way even if the ODBC entry is the same.
I don't know if what I try to do is possible, is it possible to execute a CR report with a sql command in a VB application ?
FI : I found yesterday the way to create the same report without a sql command, its working in the VB app. But it would be great if I could solve this problem because it's much more easier to create a report giving only the sql request and not to do that manually in the report (attaching all the tables, making the group by, sort...). -
Can't import music; error message reads, "The importer reported a generic error."
I've attempted to drag and drop multiple music files into the Soundtrack bar but nothing is working. I keep getting the same Error Message, which reads, "The importer reported a generic error." Can someone lead me in the right direction with some help?
Along with the comments by both John T., and Steve G., there have been some issues reported with both of the two, Fixed Audio Tracks, Soundtrack and Narration. I do not think you have gotten that far yet, but wanted to point out the potential for those issues. Should you get your music Imported into the Project, but have issues when you use either Narration, or Soundtrack, just use an empty "regular" Audio Track.
Good luck, and please let us know more about your music files.
Hunt -
Error message while saving cryrstal report
Hi Experts,
following error message occured while safing a crystalo report:
"an error occured while safing and/or publish. The return code 503 was returned from the server. Report ID entered is invalid"
in the pop-up "Save to BW options" I have choosen "automatically publish to Enterprise" and I named my report IBU_TLS_EAM. should I have to choose another name? and if yes, why? I am asking because of the error message saying "report id entered invalid".
thank you in advance and regards,
H.-J. Kersten
note: I tried it again with the name "test" instead of "IBU_TLS_EAM" and while saving now it showed the error message "an error occured while safing and/or publishing. The return code 471 was returned from the server"
Please help
Edited by: Hans-Joerg Kersten on Feb 26, 2009 3:00 PMPlease re-post if this is still an issue to the Business Objects Forum or if you have a valid support contract create a case on line
-
How to customize the error messages in web analysis reports
Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri -
Error message when previewing RTF report
Using BI Publisher (10.1.3.3.0 Build 108) Building a simple template using the following XML file - shown is just a snippet of the total XML file.
<employee>
<employee_id>103</employee_id>
<first_name>Alexander</first_name>
<last_name>Hunold</last_name>
<salary>9000</salary>
</employee>
Have built the following template in WORD 2003
<?for-each:Employee?>
first_name
salary
<?end for-each?>
When preview in rtf only thing I am getting is an error window that pops up and simply displays the word Error with NO error message whatsoever!
Please let me know what is going on and how to use this 'tool'
Thanks - CaseyGentlemen - the problem has been found and resolved. Seems like the XML Data Source cannot contain a reference to a validating DTD. Once the following reference was removed AND I used employee instead of Employee in the template all worked.
<!DOCTYPE employees SYSTEM "employees.dtd">
I assume this is correct - not being able to contain a DTD reference? I will also, tomorrow (read that as probably Monday) be trying the same thing using XML Schema vaildation.
THANKS for the help - Casey
Maybe you are looking for
-
Formatting Totals in OBIEE 11g
Hi, we have a requirement to format the totals of a table in obiee 11g. When I format the totals, the formatting selections I made is not applied for all the entire totals section. If the table has more than one dimension values in it, the formatting
-
Colors Screwed Up (sorry if this posted twice)
Last time I clicked post nothing happened so I'm not sure if this posted. Anyway, the light blue color used in Aqua in places like iChat buddylists (bg of every other person on list), Mail Sidebar, Aquasition........, for some reason used in color la
-
How can I display the toolbox in Premier Elements 9? Example: I want to crop a video clip and I cannot find out how to display the toolbox. One of the tutorial videos for an earlier version of Premier Elements shows how to use the tools, but not how
-
Ess/Leave Workflow Still In Process(In a specific snario when Escalated )
Hi Guru's, I have a problem with Ess/Leave workflow. when the leave is applied from the portal which is triggering workflow and reching to the right agent and when the leave is withdrawn , then which is completing the workflow which is fine. Recently
-
Hi All, I have a new requirement where we need to create Vendor using adobe forms. The requirement is given below: 1. Need to create offline interactive adobe form for vendor details. For this, we need to send the form to the vendor to fill out and h