Error Message in executing MRRL (ERS) transaction.

Hi,
I am working in 4.7 EE version and I configured the Evaluated Receipt Settlement process.
While executing tcode MRRRL the system is giving the following error:
*Message No. M8446
ERS settlement: No message was found for partner 103948/company code 1000*
Please help me to solve this issue.
Regards
Sudhakar
Edited by: Sudhakar Taduvai on Jul 11, 2008 10:44 AM

Have you configured the messaging in T.Code M806?  Thanks.
Please ensure that you have maintained all the partner functions in this t.code.
Edited by: Madhav Nanduri on Jul 11, 2008 3:59 PM

Similar Messages

  • Receiving the error message while executing the Real Time DTP

    Hi,
    I am receiving the error message while executing the Real time DTP for Billing data.
    Error Message - Record filtered in advance as error records with the same key exist     RSM2     722
    When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
    Diagnosis
    The existing DTP requires a serialized update because fields are updated
    non-commutatively during the processing run (for example, MOVE).
    Therefore all new data records that have the same semantic key as
    incorrect records that have not yet been corrected in earlier requests
    or earlier data packages of the same request, are filtered out after the
    extraction in a special step. In this way the system ensures that
    incorrect data records are not repeated for your changes, which may not
    contain errors themselves.
    System Response
    The data record is not updated but is written to an error stack.
    Procedure
    Procedure
    Correct all incorrect data records and update them using an error DTP.
    Procedure for System Administration
    I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
    Regards,
    Ram

    Hi Arvindh,
    Its  write optimized DSO.. there is no option to generate SIDs.
    Hi Kiran,
    I checked the link u sent me. Here the main issue is..The function module is standard  and its not allowing me  to do enhancement  point..
    Any idea in using Badi's??
    Thanks all...

  • Error message after executing KKRC- How to define Hierarchy ID ?

    Hi Gurus
    Ours’ is a Chemical Mfg./ Marketing Company. We have ECC 5.0 version implemented in our Company. We  have the Production process orders of different types ( Normal Process order , Reprocess Process order etc.). For the purpose of MIS it is our regular practice to download data in Worksheets & then work upon it ( pivot tables etc.)  &  compile the reports. We have the requirement to have SKU wise ( Finished Goodswise ) summarised compilation of  different type of Variances ( both Qty. , value of input materials, wherever applicable) .
    While browsing the SAP’s BPX community database I have come across the query similar to my requirement . refer thread Product costing - Information system, order summarization  
    Posted: Sep 30, 2007 3:21 AM
    As suggested in the response to that query  I have followed the steps .
    KKRV followed by KKRC . The error message after executing  KKRC reads
    “ No IDs defined for Hierarchy type CO
    Diagnosis No Hierarchy id is defined in customising for the hierarchy type you selected
    Procedure : go in to the customising and define the structure of hierarchy  by means of an appropriate Hierarchy ID. “
    Can some one give me further leads ( i.e. navigation/path and clues for  defining   Hierarchy ID)
    Or
    is there any other way to address the requirement mentioned in opening para.
    With best regards
    Sudheer

    Hi Patrick,
    unfortunately I cannot provide an ad-hoc solution for your nested exception without further investigations.
    Nevertheless I'm very interested to know, why you "gave up" using the Adaptive WS Model in Web Dynpro. What's the problem?
    Perhaps the coding which now requires to create a model instance:
    /** Hook method called to initialize controller. */
    //@@end
    public void wdDoInit() {
      //@@begin wdDoInit()
      // create a new model instance (1)
      EmailAdWSModel model = new EmailAdWSModel();
      // create model objects (2, 3)
      Request_SendEmail requestMO = new Request_SendEmail(model);
      SendEmail emailMO = new SendEmail(model);
      // associate model objects (4)
      requestMO.setSendEmail(emailMO);
      // bind executable model object to context node (5)
      wdContext.nodeRequest_SendEmail().bind(requestMO);
      //@@end
    Regards, Bertram

  • HT204088 I've no connection to itunes,  Error message is. Oops! Transaction didn't go through, please try again, and I've try about 10 times.

    I've no connection to itunes
    I can not bye gold/ items in Modern War
    Error message is.
    Oops!
    Transaction didn't go through, please try again, and I've try about 10 times.
    Help me, my faction need me.
    Henrik Andre

    Open the App Store and navigate to purchased, it should show the missing app under Not On This ipad. There should be a small cloud icon you can click on to download it.

  • Error Message ISSR452 while creating Financial Transaction

    Hi Experts,
    While creating Fixed Deposit in FTR_CREATE is get the following error message
    No master data selected for fixed asset
    Message no. ISSR452
    This message no relevance to current Fixed Deposit transaction. Also no related post or Note is available
    Please advice

    Hi,
    the message is coming from regulatory reporting (FS-SR) - have you activated it erroneously?
    If it is supposed to be active, but you want to save the deal despite of errors, please check note 1864243 on how to activate the enhancement BADI_ISSR_ADMN_MESSAGE_MM.
    Best regards,
    Marie

  • Error message while executing a SWF File

    Hi All,
    Iam trying to execute a SWF file which has its actionscript
    written in AS3. When i execute this, I am getting an error message
    which is as follows
    Verify Error 1030# Stack Depth unbalanced 1 != 0.
    Can anyone tell me what could be the root cause?
    Thanks in advance,
    Prabakaran Srinivasan.

    Hi All,
    I am able to find the root cause for this. For AS 3 classes,
    while parsing the ABC code, every method body will be a set of
    instructions in which each instruction will have an offset to it.
    This offset will be useful to mark the target for branching
    instructions like if, while etc.... Because, these instructions
    contains targetoffset as a parameter to which the instruction has
    to jump when the condition becomes true or false. The process what
    i am doing is i do some code injection to replace the URLRequest
    calls. The flash file in which i got this error, i did replace the
    URLRequest call to my own method call and this code was being
    wrapped up by an IF block. Because of the code injection, i need to
    update the offset of the instructions with the difference offset
    value. I did this, but i missed the jumpoffset parameter of the if
    block wrapping my injected code which was the root cause. I did fix
    this...
    Thanks,
    Prabakaran Srinivasan.

  • Error messages while executing File - RFC - File.

    Hi,
    I am doing a File - RFC - File scenario from Raj's blog.
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file%2528without+bpm%2529&
    I am getting series of error messages.
    Someone please drive me in the right way. I am following each and every step in the same way mentioned there.
    1. Everytime the file is picked up, i can see 3 messages in Moni. One from File - RFC. 2 messages from RFC - File. I changed the sender QOS with BE and EO and EOIO. but all the time it shows 3 messages. Why are 3 messages executing for this scenario? what should be QOS on the sender File CC?
    2.. It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
    I re created CC, re imported RFC, searched for that erorr message in sdn and followed everything. no luck
    3. Of the other 2 messages in MONI (RFC - WS), one of them shows error messageg as 2 and the other one shows a error message that Interface mapping does not exist in run time cache.
    I re created IR objects again, I created MI for RFC which I dint do earlier, I re mapped, activated, did all cahce refreshes in SXI_Cache, CPA delta and full cache refresh.
    But still it shows up the same error message.
    Can you guys tell me whats bad going on with my scenario?
    Appreciate your help,
    Venkat.

    Hi Venkat,
    From this line:
    It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
    It seems there might be a problem in RFC Adapter. Can you see the error in Communication channel Monitoring what error it is showing. Probably the communication between PI and SAP might be a problem. If you put the error here, somebody might be able to help you out.
    Regards,
    ---Satish

  • Error Message while executing the Application

    Hi,
    I am new to Webdynpro and I created my first application by following some blog on a portal.I was able to activate my application successfully and when I executed I get this below error message.
    I checked the cardinality and it is 0..1.My Inti.Lead Selection is set to NO.
    I mappedthe nodes in my views also. But still i don't know whay am getting this error.
    Note
    The following error text was processed in the system RS2 : Adapter error in &VIEW_ELEMENT_TYPE& "VBELN" of view "Z_MYFIRST_WEBDYNPRO.MAIN": Context binding of property VALUE cannot be resolved: Node MAIN.1.NODE_VBAK does not contain any elements
    The error occurred on the application server ucerp18_RS2_00 and in the work process 11 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
    Method: RAISE_BINDING_EXCEPTION of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
    Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
    Thanks
    Kiran

    Hi,
    I changed the cardinality to 1:1 and I can see the selection screen. But, can you please explain why I should change this from 0:1 to 1:1.
    Now I have a new error:
    After I enter the sales order Number and hit my FIND button, am getting this error:
    The following error text was processed in the system RS2 : Could not find attribute VBELN
    Thanks,
    Kiran
    Now am getting a different error:
    Invalid operand type for the MOVE-CORRESPONDING statement
    Thanks
    Kiran
    Edited by: kiran dasari on Aug 20, 2009 10:54 PM

  • Error message in executing query

    Hi
    There is one query which was working fine initially but sudeenly after making some changes it is giving the error message
    Diagnosis
    This internal error is a targeted termination since the program has an
    incorrect status.
    I tried RSRT but it still does not help, giving the same message.
    Please advise is there any other way to get this query working again.
    Thanks in advance.
    Regards,
    Kate.

    Hi Bahnu,
    Thanks for your reply. I am able to access the query definition in the Bex analyser and I am able to execute it till the selection screen but after that it gives me the message:
    System error in program CL_RSDM_READ_MASTER_DATA and form
    sidvaldirect_read2
         Message no. BRAIN299
    Diagnosis
    This internal error is a targeted termination since the program has an
    incorrect status.
    Procedure
    Analyse the situation and inform SAP.
    I think the problem happened when someone else was trying to edit the query from Bex Designer when I was trying to
    edit in the Bex Analyser.
    Can you suggest what can be done to resolve it.
    Even I tried creating a copy and executing it but both give the same error.
    Many Thanks.
    Kind Regards,
    KAte.

  • Error message when executing a report through a VB application

    Hello,
    I have a problem when I want to launch a Crystal Report 10 report in a Visual Basic application.
    I created a report using "Add a command" to add a SQL query to this report, the report is working well when I launch it in Crystal Report. But when I launch it in the application I get an error message "The table 'Command' could not be found".
    (Other reports are working in VB when I create a report whitout the sql command tool)
    How can I do to make this working through VB ?
    This application uses a sql server 2005 database.
    Thank's in advance for your help,
    Régis

    Thank's for your answer, yes I'm connecting through an ODBC connection, yes the VB app is running the same odbc entry.
    When I have only a "normal" link to a table the report is working well, the problem is that when I add a sql command in this report, the VB application thinks it's a "normal" sql table and it gives me the error message. The VB application didn't recognize that the table command in the report is a sql request. I don't know what's the difference between executing this report directly in CR or in the VB application, the report didn't react in the same way even if the ODBC entry is the same.
    I don't know if what I try to do is possible, is it possible to execute a CR report with a sql command in a VB application ?
    FI : I found yesterday the way to create the same report without a sql command, its working in the VB app. But it would be great if I could solve this problem because it's much more easier to create a report giving only the sql request and not to do that manually in the report (attaching all the tables, making the group by, sort...).

  • Error message after executing webservice

    Hi all!
    After giving up using the "adaptive webservice model", I am trying to use the "old" deprecated webservice model.
    The model is embedded without any problems right now.
    Now I am trying to call the webservice in my webdynpro application.
    Unfortunately, the following error message appears:
    Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.XmlUnmarshalException: XML Deserialization Error. Can not create instance of class [NULL] when deserializing XML type [Rentenkonto][Kunde].
    Does anybody have an idea, how to fix the problem?
    Thank you for your help in advance!
    Kind regards, Patrick.

    Hi Patrick,
    unfortunately I cannot provide an ad-hoc solution for your nested exception without further investigations.
    Nevertheless I'm very interested to know, why you "gave up" using the Adaptive WS Model in Web Dynpro. What's the problem?
    Perhaps the coding which now requires to create a model instance:
    /** Hook method called to initialize controller. */
    //@@end
    public void wdDoInit() {
      //@@begin wdDoInit()
      // create a new model instance (1)
      EmailAdWSModel model = new EmailAdWSModel();
      // create model objects (2, 3)
      Request_SendEmail requestMO = new Request_SendEmail(model);
      SendEmail emailMO = new SendEmail(model);
      // associate model objects (4)
      requestMO.setSendEmail(emailMO);
      // bind executable model object to context node (5)
      wdContext.nodeRequest_SendEmail().bind(requestMO);
      //@@end
    Regards, Bertram

  • Ds4  can't save files.  Error message: while executing onload in_opOpen.htm

    All of a sudden I'm getting this error message. I can view files and create files but can no longer save files.
    If I try to save a file, I get the following message:
    Full text of message: While executing onLoad in_opOpen.htm, the following Javascript error(s) occurred: In file "_opOpen": onOpen is not defined
    If I click ok in the alert,
    The following translators were not loaded due to errors:
    ASP.html has configuration information that is invalid.
    Data.htm: has configuration information that is invalid.
    ICERegionals.htm has configuration information that is invalid
    Not sure how these were corrupted. How do I fix this problem? The resolutions I've found on line are not working.An example: delete the file called ‘WinFileCache-[random numbers].dat’.. That did not work. I'm using Windows 7 Professional.

    If you've already tried clearing the cache file and personal config folder: Deleting a corrupted cache file
    A good next step would be restoring preferences: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
    Here are some other troubleshooting steps: http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
    If nothing works, a clean reinstall will probably do the trick: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Pop-up an error message while executing in foreground

    Hi,
    I have a requirement from my client, they want an error message while they are trying to executing the program in foreground. The main reason for this it does not create a spool while executing the program in foreground, it creates only in background.
    Is there any way of doing this?
    Any sort of ideas is highly appreciated.
    Thanks,
    Srini

    Check with your ABAP technical memeber. He should be able to add the error message to the porgram

  • Getting Error message when execute Netezza Stored Procedure calling in ODI

    Hi,
    I need help to resolve this issue,
    I'm trying to execute a Netezza stored procedure passing three parameters and It getting error message .
    code:import java.sql as sql
    import java.lang as lang
    import java.sql.Types as types
    MyCon = snpRef.getJDBCConnection("SRC")
    def CALL_NZ_SP():
         try: p_log_id = 22
    p_step_number = 2
              p_drive_id= 3455
    myStmt = MyCon.prepareStatement("CALL SP_NAME(?,?,?)");
              myStmt.setInt(1, p_log_id);
              myStmt.setInt(2, p_step_number);
              myStmt.setInt(3, p_drive_id);
              resultSet=myStmt.executeQuery();
              resultSet.next();
              sp_return=resultSet.getInt(1);
              if sp_return !=0:
              raise 'fail';
         finally:
              pass
    Please let me know is this the right code or need any code updatation.
    I appreciate ur help in this regard
    Thanks
    brk

    Hi Gowsiya,
    Maybe the WCF forum would be better for this issue, you know that this forum is to discuss the VS IDE.
    WCF forum link:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wcf
    Thanks for your understanding.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • ALV .....uregent plzz (some error message while executing)

    *& Report  ZAREPAS22
    REPORT  zarepas22 LINE-SIZE 250.
    TABLES : vbak,vbap,likp,lips,vbrk,vbrp,kna1,vbfa.
    DATA : ok_code              LIKE        sy-ucomm,
           g_container          TYPE scrfname VALUE 'BCALV8_GRID_DEMO_0100_VASU',
           docking              TYPE REF TO cl_gui_docking_container,
           splitter_1           TYPE REF TO cl_gui_splitter_container,
           splitter_2           TYPE REF TO cl_gui_splitter_container,
           splitter_3           TYPE REF TO cl_gui_splitter_container,
           cell_top1            TYPE REF TO cl_gui_container,
           cell_bottom1         TYPE REF TO cl_gui_container,
           cell_top2            TYPE REF TO cl_gui_container,
           cell_bottom2         TYPE REF TO cl_gui_container,
           cell_left            TYPE REF TO cl_gui_container,
           cell_middle          TYPE REF TO cl_gui_container,
           cell_right           TYPE REF TO cl_gui_container,
           grid1                TYPE REF TO cl_gui_alv_grid,
           grid2                TYPE REF TO cl_gui_alv_grid,
           grid3                TYPE REF TO cl_gui_alv_grid,
           grid4                TYPE REF TO cl_gui_alv_grid,
           grid5                TYPE REF TO cl_gui_alv_grid.
    DATA: li_fieldcat1          TYPE lvc_t_fcat,
          li_fieldcat2          TYPE lvc_t_fcat,
          li_fieldcat3          TYPE lvc_t_fcat,
          li_fieldcat4          TYPE lvc_t_fcat,
          li_fieldcat5          TYPE lvc_t_fcat,
          lv_layout             TYPE lvc_s_layo,
          lv_variant            TYPE disvariant.
    TYPES:BEGIN OF gty_itab1,
          vbeln                 TYPE vbak-vbeln,
          kunnr                 TYPE vbak-kunnr,
          erdat                 TYPE vbak-erdat,
    END OF gty_itab1.
    TYPES:BEGIN OF gty_itab2,
          vbeln                 TYPE vbap-vbeln,
          posnr                 TYPE vbap-posnr,
          matnr                 TYPE vbap-matnr,
          kwmeng                TYPE vbap-kwmeng,
          netwr                 TYPE vbap-netwr,
    END OF gty_itab2.
    TYPES:BEGIN OF gty_itab3,
          vbeln                 TYPE likp-vbeln,
          ernam                 TYPE likp-ernam,
          erzet                 TYPE likp-erzet,
          posnr                 TYPE lips-posnr,
          matnr                 TYPE lips-matnr,
    END OF gty_itab3.
    TYPES:BEGIN OF gty_itab4,
          vbeln                 TYPE vbrk-vbeln,
          fkart                 TYPE vbrk-fkart,
          posnr                 TYPE vbrp-posnr,
          fkimg                 TYPE vbrp-fkimg,
    END OF gty_itab4.
    TYPES:BEGIN OF gty_itab5,
          kunnr                 TYPE kna1-kunnr,
          name1                 TYPE kna1-name1,
          name2                 TYPE kna1-name2,
    END OF gty_itab5.
    DATA:gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
         gwa_itab1 TYPE gty_itab1.
    DATA:gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
         gwa_itab2 TYPE gty_itab2.
    DATA:gt_itab3 TYPE STANDARD TABLE OF gty_itab3,
         gwa_itab3 TYPE gty_itab3.
    DATA:gt_itab4 TYPE STANDARD TABLE OF gty_itab4,
         gwa_itab4 TYPE gty_itab4.
    DATA:gt_itab5 TYPE STANDARD TABLE OF gty_itab5,
         gwa_itab5 TYPE gty_itab5.
    Global data
    DATA: gt_fieldcat TYPE STANDARD TABLE OF lvc_s_fcat,
          gwa_fieldcat LIKE LINE OF gt_fieldcat.
    Macro to fill field catalog
    DEFINE m_fill_field_catalog.
      gwa_fieldcat-tabname   = &1.
      gwa_fieldcat-fieldname = &2.
      gwa_fieldcat-scrtext_s = &3.
      gwa_fieldcat-scrtext_l = &4.
      Append field catalog details to field catalog internal table
      append gwa_fieldcat to gt_fieldcat.
    END-OF-DEFINITION.
    *selection screen for selecting range of values
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.   " OBLIGATORY.      " OBLIGATORY
    SELECTION-SCREEN END OF BLOCK b1.
          CLASS lcl_eventhandler DEFINITION
    CLASS lcl_eventhandler DEFINITION.
      PUBLIC SECTION.
        CLASS-METHODS:
          handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
            IMPORTING
              e_row
              e_column
              es_row_no
              sender.  " sending control, i.e. ALV grid that raised event
    ENDCLASS.                    "lcl_eventhandler DEFINITION
          CLASS lcl_eventhandler IMPLEMENTATION
    CLASS lcl_eventhandler IMPLEMENTATION.
      METHOD handle_double_click.
    *DEFINE LOCAL DATA.
    *DISTINGUISH ACCORDING TO SENDING GRID INSTANCE
        CASE sender.
          WHEN grid1.
            READ TABLE gt_itab1 INTO gwa_itab1 INDEX e_row-index.
            CHECK ( gwa_itab1-vbeln IS NOT INITIAL ).
            CALL METHOD grid1->set_current_cell_via_id
              EXPORTING
                is_row_no = es_row_no.
            CALL METHOD cl_gui_cfw=>set_new_ok_code
              EXPORTING
                new_code = 'ORDER_DETAILS'.
          WHEN grid2.
            READ TABLE gt_itab2 INTO gwa_itab2 INDEX e_row-index.
            CHECK ( gwa_itab2-vbeln IS NOT INITIAL ).
            CALL METHOD grid2->set_current_cell_via_id
              EXPORTING
                is_row_no = es_row_no.
            CALL METHOD cl_gui_cfw=>set_new_ok_code
              EXPORTING
                new_code = 'DELIVERY_DETAILS'.
          WHEN grid3.
            READ TABLE gt_itab3 INTO gwa_itab3 INDEX e_row-index.
            CHECK ( gwa_itab3-vbeln IS NOT INITIAL ).
            CALL METHOD grid3->set_current_cell_via_id
              EXPORTING
                is_row_no = es_row_no.
            CALL METHOD cl_gui_cfw=>set_new_ok_code
              EXPORTING
                new_code = 'BILLING_DETAILS'.
          WHEN grid4.
            READ TABLE gt_itab4 INTO gwa_itab4 INDEX e_row-index.
            CHECK ( gwa_itab4-vbeln IS NOT INITIAL ).
            CALL METHOD grid4->set_current_cell_via_id
              EXPORTING
                is_row_no = es_row_no.
            CALL METHOD cl_gui_cfw=>set_new_ok_code
              EXPORTING
                new_code = 'BILLING_DETAILS'.
          WHEN grid5.
            READ TABLE gt_itab5 INTO gwa_itab5 INDEX e_row-index.
            CHECK ( gwa_itab5-kunnr IS NOT INITIAL ).
          WHEN OTHERS.
        ENDCASE.
      ENDMETHOD.                    "handle_double_click
    ENDCLASS.    "lcl_eventhandler IMPLEMENTATION
    START-OF-SELECTION.
      SELECT vbeln kunnr erdat FROM vbak INTO TABLE gt_itab1
                              WHERE vbeln IN  s_vbeln.
    creating docking container
      CREATE OBJECT docking
        EXPORTING
         parent     = cl_gui_container=>screen0
         ratio      = 90
       EXCEPTIONS
        OTHERS      = 6.
      IF sy-subrc EQ 0.
      ENDIF.
    Create splitter container
      CREATE OBJECT splitter_1
          EXPORTING
            parent            = docking
            rows              = 1
            columns           = 3
          EXCEPTIONS
            cntl_error        = 1
            cntl_system_error = 2
            OTHERS            = 3.
      IF sy-subrc  EQ 0.
      ENDIF.
    Get cell container
      CALL METHOD splitter_1->get_container
        EXPORTING
          row       = 1
          column    = 1
        RECEIVING
          container = cell_left.
      CALL METHOD splitter_1->get_container
        EXPORTING
          row       = 1
          column    = 2
        RECEIVING
          container = cell_middle.
      CALL METHOD splitter_1->get_container
        EXPORTING
          row       = 1
          column    = 3
        RECEIVING
          container = cell_right.
    Create 2nd splitter container
      CREATE OBJECT splitter_2
      EXPORTING
          parent            = cell_left
          rows              = 2
          columns           = 1
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc  EQ 0.
      ENDIF.
    Get cell container
      CALL METHOD splitter_2->get_container
        EXPORTING
          row       = 1
          column    = 1
        RECEIVING
          container = cell_top1.
      CALL METHOD splitter_2->get_container
        EXPORTING
          row       = 2
          column    = 1
        RECEIVING
          container = cell_bottom1.
    Create 3rd splitter container
      CREATE OBJECT splitter_3
          EXPORTING
            parent            = cell_middle
            rows              = 2
            columns           = 1
          EXCEPTIONS
            cntl_error        = 1
            cntl_system_error = 2
            OTHERS            = 3.
      IF sy-subrc  EQ 0.
      ENDIF.
    Get cell container
      CALL METHOD splitter_3->get_container
        EXPORTING
          row       = 1
          column    = 1
        RECEIVING
          container = cell_top2.
      CALL METHOD splitter_3->get_container
        EXPORTING
          row       = 2
          column    = 1
        RECEIVING
          container = cell_bottom2.
    Create ALV grids
      CREATE OBJECT grid1
        EXPORTING
          i_parent          = cell_top1
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  EQ 0.
      ENDIF.
      CREATE OBJECT grid2
        EXPORTING
          i_parent          = cell_bottom1
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  EQ 0.
      ENDIF.
      CREATE OBJECT grid3
        EXPORTING
          i_parent          = cell_top2
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  EQ 0.
      ENDIF.
      CREATE OBJECT grid4
        EXPORTING
          i_parent          = cell_bottom2
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  EQ 0.
      ENDIF.
      CREATE OBJECT grid5
        EXPORTING
          i_parent          = cell_right
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  EQ 0.
      ENDIF.
    Set event handler
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid1.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid2.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid3.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid4.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid5.
    lv_layout-zebra             = 'X'.
    lv_layout-cwidth_opt        = 'X'.
    lv_variant                  = 'ZAREPAS22'.
    Display data
      PERFORM prepare_alv_fieldcat1  CHANGING li_fieldcat1.
    *commented lines i suppose to include here....
      CALL METHOD grid1->set_table_for_first_display
        EXPORTING
          is_variant      = lv_variant
          i_save          = 'A'
          i_default       = space
          is_layout       = lv_layout
        CHANGING
          it_outtab       = gt_itab1
          it_fieldcatalog = li_fieldcat1
        EXCEPTIONS
          OTHERS          = 4.
      PERFORM prepare_alv_fieldcat2  CHANGING li_fieldcat2.
      CALL METHOD grid2->set_table_for_first_display
        EXPORTING
          is_variant      = lv_variant
          i_save          = 'A'
          i_default       = space
          is_layout       = lv_layout
        CHANGING
          it_outtab       = gt_itab2
          it_fieldcatalog = li_fieldcat2
        EXCEPTIONS
          OTHERS          = 4.
      PERFORM prepare_alv_fieldcat3  CHANGING li_fieldcat3.
      CALL METHOD grid3->set_table_for_first_display
        EXPORTING
          is_variant      = lv_variant
          i_save          = 'A'
          i_default       = space
          is_layout       = lv_layout
        CHANGING
          it_outtab       = gt_itab3
          it_fieldcatalog = li_fieldcat3
        EXCEPTIONS
          OTHERS          = 4.
      PERFORM prepare_alv_fieldcat4  CHANGING li_fieldcat4.
      CALL METHOD grid4->set_table_for_first_display
        EXPORTING
          is_variant      = lv_variant
          i_save          = 'A'
          i_default       = space
          is_layout       = lv_layout
        CHANGING
          it_outtab       = gt_itab4
          it_fieldcatalog = li_fieldcat4
        EXCEPTIONS
          OTHERS          = 4.
      PERFORM prepare_alv_fieldcat5  CHANGING li_fieldcat5.
      CALL METHOD grid5->set_table_for_first_display
        EXPORTING
          is_variant      = lv_variant
          i_save          = 'A'
          i_default       = space
          is_layout       = lv_layout
        CHANGING
          it_outtab       = gt_itab5
          it_fieldcatalog = li_fieldcat5
        EXCEPTIONS
          OTHERS          = 4.
    Link the docking container to the target dynpro
      CALL METHOD docking->link
        EXPORTING
          repid  = syst-repid
          dynnr  = '0100'
        EXCEPTIONS
          OTHERS = 4.
      IF sy-subrc  EQ 0.
      ENDIF.
    NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
      CALL SCREEN '0100'.
    END-OF-SELECTION.
    *&      Module  STATUS_0100  OUTPUT
          text
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'STATUS_0100'.
    SET TITLEBAR 'xxx'.
    Refresh display of detail ALV list
      CALL METHOD grid2->refresh_table_display
        EXCEPTIONS
          OTHERS = 2.
      IF sy-subrc  EQ 0.
      ENDIF.
    Refresh display of detail ALV list
      CALL METHOD grid3->refresh_table_display
        EXCEPTIONS
          OTHERS = 2.
      IF sy-subrc  EQ 0.
      ENDIF.
    Refresh display of detail ALV list
      CALL METHOD grid4->refresh_table_display
        EXCEPTIONS
          OTHERS = 2.
      IF sy-subrc  EQ 0.
      ENDIF.
    Refresh display of detail ALV list
      CALL METHOD grid5->refresh_table_display
        EXCEPTIONS
          OTHERS = 2.
      IF sy-subrc  EQ 0.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
          text
    MODULE user_command_0100 INPUT.
      CASE sy-ucomm.
        WHEN 'BACK' OR
             'EXIT'  OR
             'CANCEL'.
          SET SCREEN 0.LEAVE SCREEN.
    USER HAS PUSHED BUTTON "DISPLAY OREDERS"
        WHEN 'ORDER_DETAILS'.
          PERFORM order_show_details.
        WHEN 'DELIVERY_DETAILS'.
          PERFORM delivery_show_details.
        WHEN 'BILLING_DETAILS'.
          PERFORM billing_show_details.
        WHEN OTHERS.
      ENDCASE.
      CLEAR : ok_code.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Form  ORDER_SHOW_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM order_show_details .
    define local data
      DATA:
        ld_row      TYPE i,
        gwa_itab1     TYPE vbak.
      CALL METHOD grid1->get_current_cell
        IMPORTING
          e_row = ld_row.
      READ TABLE gt_itab1 INTO gwa_itab1 INDEX ld_row.
      CHECK ( syst-subrc = 0 ).
      SELECT kunnr name1 name2 FROM  kna1 INTO TABLE gt_itab5
             WHERE  kunnr  = gwa_itab1-kunnr.
      SELECT vbeln posnr matnr kwmeng netwr FROM  vbap INTO TABLE gt_itab2
             WHERE  vbeln  = gwa_itab1-vbeln.
    *REFRESH: gt_LIPS.
    ENDFORM.                    " ORDER_SHOW_DETAILS
    *&      Form  DELIVERY_SHOW_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM delivery_show_details .
    define local data
      DATA:
        ld_row      TYPE i.
       gwa_itab2     TYPE vbap.
      CALL METHOD grid2->get_current_cell
        IMPORTING
          e_row = ld_row.
      READ TABLE gt_itab2 INTO gwa_itab2 INDEX ld_row.
      CHECK ( syst-subrc = 0 ).
      SELECT SINGLE * FROM vbfa WHERE vbelv = gwa_itab2-vbeln
                                  AND vbtyp_n = 'J'.
      SELECT posnr matnr FROM lips INTO TABLE gt_itab3
           WHERE vbeln = vbfa-vbeln
             AND vgpos = gwa_itab2-posnr.
    *REFRESH: gt_LIPS.
    ENDFORM.                    " DELIVERY_SHOW_DETAILS
    *&      Form  BILLING_SHOW_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM billing_show_details .
    define local data
      DATA:
        ld_row      TYPE i.
       gwa_itab3     TYPE lips.
      CALL METHOD grid3->get_current_cell
        IMPORTING
          e_row = ld_row.
      READ TABLE gt_itab3 INTO gwa_itab3 INDEX ld_row.
      CHECK ( syst-subrc = 0 ).
      SELECT SINGLE * FROM vbfa WHERE vbelv = gwa_itab3-vbeln
                                  AND vbtyp_n = 'M'.
      SELECT posnr fkimg FROM vbrp INTO TABLE gt_itab4
           WHERE vbeln = vbfa-vbeln
             AND vgpos = gwa_itab3-posnr.
    ENDFORM.                    " BILLING_SHOW_DETAILS
    *&      Form  prepare_alv_fieldcat
    FORM prepare_alv_fieldcat1  CHANGING lpi_fieldcat1 TYPE lvc_t_fcat.
      m_fill_field_catalog 'GTY_ITAB1' 'VBELN' 'Ord Num'(004) 'Order Number'(005).
      m_fill_field_catalog 'GTY_ITAB1' 'kunnr' 'sold party'(006) 'SOLD TO PARTY'(007).
      m_fill_field_catalog 'GTY_ITAB1' 'ERDAT' 'Ord Date'(008) 'Order Date'(009).
      lpi_fieldcat1[] = gt_fieldcat[].
      REFRESH gt_fieldcat.
    ENDFORM.                    "prepare_alv_fieldcat1
    *&      Form  prepare_alv_fieldcat
          text
         -->LPI_FIELDCAT  text
    FORM prepare_alv_fieldcat2  CHANGING lpi_fieldcat2 TYPE lvc_t_fcat.
      m_fill_field_catalog 'GTY_ITAB2' 'vbeln'  'sales Doc'(010) 'sales document'(011).
      m_fill_field_catalog 'GTY_ITAB2' 'POSNR'  'sales Doc'(012) 'sales documentITEM'(013).
      m_fill_field_catalog 'GTY_ITAB2' 'matnr'  'Mat num'(014) 'material number'(015).
      m_fill_field_catalog 'GTY_ITAB2' 'kwmeng' '*** ord qty'(016) 'cumilative order qty'(017).
      m_fill_field_catalog 'GTY_ITAB2' 'netwr'  'nwt val'(018) 'net val of item'(019).
      lpi_fieldcat2[] = gt_fieldcat[].
      REFRESH gt_fieldcat.
    ENDFORM.                    "prepare_alv_fieldcat2
    *&      Form  prepare_alv_fieldcat
          text
         -->LPI_FIELDCAT  text
    FORM prepare_alv_fieldcat3  CHANGING lpi_fieldcat3 TYPE lvc_t_fcat.
      m_fill_field_catalog 'GTY_ITAB3' 'posnr'  'del item'(020) 'delivery item'(021).
      m_fill_field_catalog 'GTY_ITAB3' 'matnr'  'mat num'(022) 'material number'(023).
      lpi_fieldcat3[] = gt_fieldcat[].
      REFRESH gt_fieldcat.
    ENDFORM.                    "prepare_alv_fieldcat3
    *&      Form  prepare_alv_fieldcat
          text
         -->LPI_FIELDCAT  text
    FORM prepare_alv_fieldcat4  CHANGING lpi_fieldcat4 TYPE lvc_t_fcat.
      m_fill_field_catalog 'GTY_ITAB4' 'posnr'  'bill item'(024) 'billing item'(025).
      m_fill_field_catalog 'GTY_ITAB4' 'fkimg'  'act inv'(026) 'actuval inv qty'(028).
      lpi_fieldcat4[] = gt_fieldcat[].
      REFRESH gt_fieldcat.
    ENDFORM.                    "prepare_alv_fieldcat4
    *&      Form  prepare_alv_fieldcat
          text
         -->LPI_FIELDCAT  text
    FORM prepare_alv_fieldcat5  CHANGING lpi_fieldcat5 TYPE lvc_t_fcat.
      m_fill_field_catalog 'GTY_ITAB5' 'kunnr'  'cust no'(029) 'cust number'(030).
      m_fill_field_catalog 'GTY_ITAB5' 'name1'  'name1'(031) 'name1'(032).
      m_fill_field_catalog 'GTY_ITAB5' 'name2'  'name2'(033) 'name2'(034).
      lpi_fieldcat5[] = gt_fieldcat[].
      REFRESH gt_fieldcat.
    ENDFORM.                    "prepare_alv_fieldcat5
    *appending
    *FORM append_catalog1 USING value(p_fname)
                             value(p_tname)
                             value(p_coltext).
    DATA : v_fcat TYPE lvc_s_fcat.
            v_fcat-fieldname = p_fname.
            v_fcat-ref_table = p_tname.
            v_fcat-coltext   = p_coltext.
    APPEND v_fcat TO li_fieldcat1.
    *ENDFORM.                    "append_catalog

    Hi Srinivas,
    What is the Report Requirement,
    What is the Error Message u r getting.

Maybe you are looking for

  • How can I get the metronome to click dotted-quarters in 6/8?

    When I go from 4/4 to 6/8 the metronome goes hyper (clicks 8ths) This is annoying. How can I get the metronome to lay back and click dotted-quarters instead? -Thanks

  • System gives error msg "balance in transaction currency"

    Hi, when we run t-code VF02 ,after giving billing document number , when we select release to accounting system gives following error message Balance in transaction currency Message no. F5702 Diagnosis A balance has occurred in transaction currency '

  • Documentation for com.sap.isa.FrameworkConfigManager

    Hi, We have a new Java developer that doesn't have experience with SAP E-Commerce 5.0 (specifically B2B) and I have been given the task to gather up as much documentation as possible for him. So far I have found these documents: - IPC in SAP ECommerc

  • How can partially goods issue in delivery document?

    hi, I created delivery document with 20 delivery quantity at first. after that I want to create partially goods issue. for example i want to have 10 quantity in pick quantity and at first 10 quantity goods issue and save and another time goods issue

  • Restore system using time machine

    I am having a bit of printing issues.  I will print something that is an inch by an inch but instead of the printer finishing the print and feeding the paper out, it prints a faint blue tint all the way down until the page feeds all the way throught