Error Message in Flash
Hello there,
I keep having problems in flash. I have created a webpage
gallery of 11 images. Once I finish it and test it. Everything
works. I then go to save it. And that works. But I have use .psd
image files because I know flash has better compression that way
and smaller published files. I am having problems when I go to Save
and Compact. I get the error message:
quote:
Could not open one or more scenes probably because of low
memory.
To increase available memory close open documents.
Well if you look at the image
here
there is only one other file open and it's new and has one little
square in it. I have only 4 other programs open. None of which are
doing anything. My Ram is not an issue because I have 2GB ram and
right now I currently have over half a gig left available! So is
there any reason this isn't working? I am just trying to update an
already existing web gallery (
http://scotbarchitects.com/root/potomac1gal.html
) with new pictures and also taking the .jpg's that I have in there
and replacing them with .psd for faster load times.
Any ideas.
Oh also after that error message comes up and I click it a
couple times, I cannot open my file. So then I have to redo the
whole Gallery!!
Do PNG files compress as well as psd files?
Similar Messages
-
An error message is flashing continously on my iphone4 screen. How to get rid of this?
Error message is flashing continously on my iphone4 screen. How to get rid of this?
i was just pointing you in the right direction
thanks for the star and ... happy computing !
JGG -
Error message: Adobe Flash Player 11.6 r602 stopped working and was closed
I keep getting this error message: Adobe Flash Player 11.6 r602 stopped working and was closed.
elmer33 wrote:
I loggin by selecting "Run as Administrator". Does this qualify as being logged-in as Admministrator? If so, this still does not allow deletion of the intended file.
Thanks for your suggestions.
Use File Assassin. If it can't remove it. it CAN'T BE REMOVED. -
Unable to publish projects with inserted video - error message The Flash video can not be loaded
I've created a project in Captivate 6 with two slides that have inserted videos in them
Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
Below are my settings and the error message
Any suggestions would be greatly appreciated.Your screenshot indicates you are publishing to a folder on a network drive.
Have you:
Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
Verified that the folder location is set up as a trusted location in your Flash Global Security settings? -
Output Error Message in Flash 8
Hi All,
I'm building a form in Flash 8 that includes check boxes.
When I add the check boxes and test the movie I get the following
output error message:
**Warning** The linkage identifier 'CheckBox' was already
assigned to the symbol 'Assets/UIComponents/CheckBox', and cannot
be assigned to the symbol 'CheckBox', since linkage identifiers
must be unique.
For the life of me I can't get rid of this. Anyone know what
the heck is going on?
Thanks,
ScottIt appears that the OP has created a MovieClip symbol and
named it CheckBox, then has chosen to export for actionscript. The
CheckBox component needs to have that identifier to function
correctly. So the OP needs either, change the linkage ID on the
symbol named "CheckBox", or take the linkage ID off
completely. -
MIRO error message not flashing
I am trying to flash the error message when inspection lot not found but it is not flashing the hard coded error message.
Then I tried to use function module MRM_ERRMSG_COLLECT and used the below code
CLEAR wa.
wa-MSGTY = sy-msgty." 'E'.
wa-MSGID = sy-msgid."'00'.
wa-MSGNO = sy-msgno."'001'.
wa-MSGV1 = 'QA acceptance is not made for the inspection lot'.
MSGV2 =
MSGV3 =
MSGV4 =
wa-SOURCE = 'P'.
wa-RBLGP = '000000'.
SHOWN =
APPEND wa to error_tab.
CALL FUNCTION 'MRM_ERRMSG_COLLECT'
EXPORTING
i_xcustom = 'X'
I_XCOLLECT = 'X'
i_msgid = wa-MSGID
i_msgty = wa-MSGty
i_msgno = wa-MSGno
I_MSGV1 =
I_MSGV2 =
I_MSGV3 =
I_MSGV4 =
I_SOURCE = ' '
I_RBLGP = 0
tables
t_errprot = error_tab
CHANGING
X_ERROR = ' '
In this case it isllowing the document to save.
Please helpThasnks All,
I have found a solution to it.
We need to add the messages in FI message class.
and pass it in the exit like this.
MESSAGE id wa-MSGID TYPE wa-MSGty number wa-msgno .
change wa-msgno to the message number you have goven to your nes message -
While trying to install an update for Adobe Flash I recieved this error. I can't seem to find anyone to help with this. There aren't any email addresses etc that are available.
the following is the exact error message I recieved. I haven't had problems prior to this for installing updates.
"This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
So, I need assistance to update.
Debora Moes
Cold Lake Alberta
[email address removed]What is your operating system? Try the offline installer
Windows: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
Mac OS: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
P.S. this is a public forum; please do not post your email address or other private data! -
Error Message on Flash installation
I tried the fix suggested by johndiablo - downloaded flash
installer then downloaded IE "standalone" Flash 9 installer. Now I
get an error message "Flash Player ex is not a valid Win32
application. What's it all mean?? Will I ever get Flash installed?
Thanks. annievgWhat version of Mac OS X? Be aware that Studio 8 is quite old and may not be supported on later versions of Mac OS X. In fact the reference to <Flash Carbon Player> suggests this, as Carbon is being deprecated (it was a way to bridge the old pre-mac os x codebases and bring them over to Mac OS X). It may be time to upgrade/update your software.
-
Video error message in Flash projector
Hi,
I am trying to watch a video which is linked to a Flash
projector. When I click the link, it says
'unable to download an appropriate decompressor'
Is anyone familiar with this error message? If so, it this a
problem with the projector, a problem with Windows Media Player or
a problem with the computer it is playing on?
I have tried it on my laptop (a newer model running Windows
XP which the projector was created on) and everything works just
fine.
Thanks very much.What projector version are you using ?
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness." -
ERROR MESSAGE regarding Flash Player
When i want to watch a program on BBC iplayer, it comes up with an error message saying that you must download Flash Player or that it is not up to date, however when i follow the link it brings me to a page that says that either ActiveX Filtering is on or Shockwave Flash Player is disabled, however i have checked both of these and it is not the case, I run Windows 8.1 and Internet Explorer (latest version). This has happened before and i have managed to fix it however it has returned and i have no clue how to make it work. Please Help!
Bailo2025 wrote:
am I opening up a bag of trouble by swithing off "Active Fitering"?
About ActiveX Filtering
ActiveX Filtering TestDrive Demo
ActiveX Filtering allows you to browse the Web without running any ActiveX controls.
As you browse the Web, you may encounter webpages that don't work properly unless you install an ActiveX control. ActiveX controls are powerful browser plugins that enable many rich web experiences. However, many of these controls are written by 3rd parties and Microsoft cannot guarantee their quality.
After installing an ActiveX control to use on a particular site, you may find that this control is now running on many other websites as well. Sometimes, such controls may be used to display content that you don't want to see, and they might even prevent you from having a good experience when viewing the webpage. Moreover, ActiveX controls may introduce performance, reliability, security or privacy issues while browsing.
ActiveX Filtering puts you even more firmly in control of the ActiveX controls running in your browser. When ActiveX Filtering is enabled, you can choose which websites you want to allow to run ActiveX controls. Sites you have not approved cannot run these controls, and the browser will not show prominent notifications prompting you to install or enable them.
Try it out!
You can test-drive ActiveX Filtering by following the instructions below!
First, enable ActiveX Filtering via the Tools Menu:
Tools > Safety > ActiveX Filtering
When you visit a webpage that contains ActiveX controls, IE will prevent the controls from loading. IE displays an icon in the address bar to indicate that the ActiveX controls have been filtered:
If you visit a webpage that contains ActiveX content you want to view, you can simply turn off filtering for that website. Click the icon to display the fly-out window.
From here you can choose to turn off ActiveX Filtering. Once you take action, IE refreshes the page to ensure that all ActiveX content on the webpage runs. Now that you've turned off ActiveX Filtering for the webpage, the icon on the address bar changes state accordingly.
After you've finished viewing the content, you can click on the icon and turn filtering back on if you'd like, or you can leave filtering off for this website.
Reference:
Webpage with lots of ActiveX Controls: here
Webpage with ActiveX content you want to view: here
ActiveX is the number one reason I don't use IE. It's an ancient (in computer time) technology, dating back to 1993. EVERY other browser in the known world abandoned ActiveX more than a decade ago. -
Error message using Flash Video Converter
When trying to encode a simple mpeg file using Flash 8 Video
Converter I get an error message - as simple as that, no
explanation, just a "Encoding is not possible because an error
occurred".
I've also tried importing the mpg onto Flash's stage and
going through the steps of the "Progressive download from a web
server" - again, nothing happened, just an error message.
Any ideas, help, advice?
Thanks, Raf.ram66 wrote:
> When trying to encode a simple mpeg file using Flash 8
Video Converter I get an
> error message - as simple as that, no explanation, just
a "Encoding is not
> possible because an error occurred".
>
> I've also tried importing the mpg onto Flash's stage and
going through the
> steps of the "Progressive download from a web server" -
again, nothing
> happened, just an error message.
>
> Any ideas, help, advice?
>
meaning the file is not flash compatible.
Try to resample or another format.
Not all mpegs are compatible, they come with very large
variety
of compressions for video and audio while flash has very
particular
range, specified in help files.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free> -
Error message re flash download
I received this error message - any advice?
Adobe Reader could not open 'install_flash_player_osx_ub-6.dmg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).Try to download the installer from
http://www.adobe.com/products/flashplayer/fp_distribution3.html -
I keep getting an error message, the flash player won't install, help?
I'am using internet explorer 8 and I followed all the trouble shooting steps in the support center but i keep getting this message:
"Error opening for file writing: C:\Windows\system32\Macromed\Flash\Flash10d.ocx".
The Pop up that allows it to download the file isn't coming up, but when i tried to download the Adobe air and it came up. I checked all the security settings in the Internet options and followed it but still the same. What could this mean? Thank you.Try the following:
download the Flash Player uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html (save to disk);
download the offline ActiveX installer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe (save to disk);
close all browser windows, then run the downloaded uninstaller;
open Windows Explorer, then check that %WINDIR%\system32\Macromed\Flash is empty (or non-existant);
now run the downloaded installer
Message was edited by: ʇɐb ɹəuəllıʍ
(added forgotten links) -
Weird error message with flash player 10
I have some problems with some content played with flash
player 9. I get an error dialog up in firefox and it ask me to
dismiss or continue flash player 9 ?Hi,
Are you using Afcs to build you application ? Is so, then
please us know the details of the error. This forum is for
developers using Adobe Flash Collaboration Service to build their
applications.
Thanks
Hironmay Basu -
I'm getting an error in Flash CS6 when trying to add web address.:The following JavaScript error(s) occurred: SyntaxError: missing ) after argument list. I've opened new job and clicked on Publish Settings and ticked 'Permit Debugging' as suggested elsewhere on a Adobe forum but no luck. Any answers would be great.
you opened a fla and created a button and opened the snippets panel without problem, correct.
then, in the actions panel while the button was selected, you click actions>click to go to web page, correct?
and that last click triggers the javascript error, correct?
if yes to all 3 you have a faulty flash pro installation. uninstall flash and then reinstall.
if you did anything else, other than exactly what i listed, explain what you did.
Maybe you are looking for
-
HI Guys- k7n2 delta mobo western digital protege 40gb unjumped with windows xp home already on it ( out of a working system ) tried 2 mushkin 2100 ddr 512 in slot 1 &2 tried infineon 2100 ddr 256 133mhz in slot 1 then slot three tried samsung 2100 dd
-
I have no "Save Site as Template" in my Sharepoint site settings
Hallo! I have Sharepoint 2007 installation. Want to make site template. All RTFM I found contains reference to "Save Site as Template" operation, which must be at site settings, at "Look and Feel". But I cannot find it there!!! I have no such a menu
-
Inaccurate FCP Canvas Color Preview
I am getting FCP 7 this afternoon but I am not sure that it will address the problem I have been having in FCP 6 at all. I have a NEC LCD3090WQXi and a 2690WQXi as my primary desktop displays. I have a AJA Kona3 outputting to a HI-5 SDI to HDMI conve
-
Cannot find my music library after computer crash
i had a lot of music downloaded and now i cannot find it. did i lose it when my computer crashed. why cant i just log in and have it back? sorry apple but this is so confusing
-
How can we simulate the Indesign paragraph rules in Adobe Flex4?
Hi, http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6dc1a.h tml The above link specifies how Paragraph Rules are added in InDesign. I have a scenario where I would want the same thing to happen in Flex. So is there