Error message in iPAD 3 = Request X-Date header is outside of the expected range

I see the above error message for all requests in the Sky go app. For other devices on the same network there is no error and the service works ok. The ipad is running all other apps ok and I can see other on-line provders fine  - such as ITV, BBC, etc. I have tried changing the date and time, deleting and re-installing, running with / without a VPN service, etc. I think this is a deep HTTP  / XML level error, but as there's been no ios upgrade recently I can only assume that there's been some other change maybe in the app itself. 

To overcome this error follow the below instructions: Click Into general settings,Time and dateMake sure the set automatically tab in on. This worked for me.Trace011179 wrote:
I see the above error message for all requests in the Sky go app. For other devices on the same network there is no error and the service works ok. The ipad is running all other apps ok and I can see other on-line provders fine  - such as ITV, BBC, etc. I have tried changing the date and time, deleting and re-installing, running with / without a VPN service, etc. I think this is a deep HTTP  / XML level error, but as there's been no ios upgrade recently I can only assume that there's been some other change maybe in the app itself.  

Similar Messages

  • Soap:Server was unable to process request. --- Value does not fall within the expected range

    Brand spanking new Sharepoint 2010 RTM and Designer 2010 RTM install. Unable to edit any page whatsoever even when checking out. Error in SP Designer: soap:Server was unable to process request. ---> Value does not fall within the expected range.
    Like I said, this is a brand new RTM install with nothing altered yet. Why can't I edit any pages? I am using the highest credentials so there should be no permission issues. There isn't anything that is helping me on the Web for this.
    Why would I encounter a problem like this out of the box? This is not the beta - it is RTM!

    Go to :
    Site Collection Administration 
    SharePoint Designer Settings
    and Enable the following
    Enable Detaching Pages from the Site Definition
    Enable Customizing Master Pages and Page Layouts
    Enable Managing of the Web Site URL Structure
    This should resolve the SP Designer Edit Issues.

  • How to setup error message in JSP if no data or page found

    I want to show users some error message after user clicks on a link and no page or data is found.
    How do I show users to a valid error message if there is no data exists after they click on a link?

    Add the following line at the top of your jsp
    <%@ page errorPage="error.jsp" %>
    Then, write a error.jsp in whichever fashion u want.
    My error.jsp begins like this
    <%@ page isErrorPage="true" %>
    <html>
    <head>

  • IPad with retina is stuck on error message that iPad is unable to back up.  When hit ok, the message does not go away.  Cannot power down.  Don't have computer to sync with iTunes.  Now what?

    My coworker has a fairly new iPad with retina display.  She has an error message that the iPad has not been backed up and needs to back up when locked, on wifi, and connected to a power supply.  It has an ok button to acknowledge the message.  Every time she hits the ok button, the error message remains.  She is unable to power down because the error message stays at the top and disables the ability to use any other touch portions of the screen.  She tried using Siri to reboot, but Siri was of no help.  She just kept saying that she does not wear boots.  Holding the power button down for an extended period also did not help.  She does not have access to the computer that has her iTunes on it, so she cannot sync it via cable.  She also does not want to do a reset because she has several photos that she does not want to lose.  What can she do?

    Try holding the Home and Power keys at the same time for approx 10 seconds or until the Apple logo appears, this will 'reset' the device - it won't lose any data doing this, let us know how you get on.
    Regards,
    Steve

  • InfoPackage error message "Subsequent update (requests) : Status unknown "

    After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown "  and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
    Thanks!
    Luda

    Hi,
    Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
    Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
    some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
    If possible let me know what is error message.
    Regards,
    Vishwa.

  • TS3274 Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.

    Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.  It downloaded some images prior to this message and we selected skip any files with errors.
    Ipad now just showing apple image with power cord.  Don't want to click restore and lose all data.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • I want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

    Hi
    i want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

    Hello there ypda75,
    I have an article here that has a list of settings to get from your Email provider so you can make sure that the settings are correct. It has troubleshooting steps to try as well. Also I would recommend restarting the router, and/or testing a differnet network.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899.
    If you are unable to send or receive email, try the following steps:
    Restart the iOS device.
    Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
    Try an alternative Internet connection.
    If your email is provided by your Internet provider, try connecting from the home network.
    If your iOS device has an active cellular data plan, try to disable Wi-Fi:  Tap Settings > Wi-Fi and turn off Wi-Fi.
    If not, try a different Wi-Fi network.
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
    If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
    All the very best,
    Sterling

  • Help I upgraded to 6 OS and everything was working ok until yesterday and now it is giving me error message that I cannot connect to iTunes. I tried the reset thing and changing the date but still not working.

    Help I have an iPad 2 and recently had to upgrade to 6 OS. All was well until yesterday when I received N error message that I cannot connect to iTunes.  I tried the reset and changing the date and neither worked. Does anyone have another solution that works?  I see others are having the same problem.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I keep getting error message on iPad that it has not backed up to iCloud.  How to resolve?

    I keep getting error message on iPad that it has not backed up to iCloud.

    To get rid of the message and use your iPad normally again:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • Error Message on iPad: Sending limit exceeded

    Error Message on iPad: Sending the message failed because you exceeded your sending limit. I'm not using cloud and I can send an email using a different device.

    What mail provider do you use and you get that message always?

  • Error message: "This document contains photoshop data which appears to be damaged."

    I saved the file I was working on by choosing "Save" from the "File" menu. Unfortunately after 10 min as I saved my work  my PC had "issues" and needed to be manually shut off. I was trying to open the psd file after restarting my computer and I get this error message: "This document contains photoshop data which appears to be damaged. Continue and ignore the photoshop data?" I clicked okay and then I get just a black screen. No Layers or any pictures.
    I have tried to preview in Graphic Converter, in Illustrator, in ACDSee, etc... Nothing... I just get a black screen. Also, I have tried file recovery programs: Stellar Phoenix PSD Repair V1.0 and Advanced PSD Repair v1.4
    The program Stellar Phoenix PSD Repair V1.0 was able to recover only BMP picture 3.4 KB, it is so tiny that you can't see anything on the picture.
    I also have tried to install plugin "psdrecover", for Adobe Photoshop. Unsuccessfully for some reason. The plugin does not want to be installed into the "plugins" folder. I did follow the instructions.
    I am using Photoshop 6 version and Windows 7 operating System.
    I am in dire need of help. I've been working on it for days. Is there any way to recover that file back?

    I hate to be the bearer of bad news, but you're likely out of luck.  We almost never hear of anyone recovering image data from a damaged PSD.
    Some thoughts:
    1.  Set up backups.
    2.  Get in the habit of saving your master file in several different locations as you work on it.
    3.  Consider upgrading to Photoshop CS6, which auto-saves your work in the background.  I'm not sure whether it would have recovered the data in your particular case, but it's possible.
    4.  Don't feel bad - go back and do the image again, and I'll bet it comes out even better in less time.
    -Noel

  • How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

    Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • ACS 5.2 Error message: 5405 RADIUS Request dropped

    The error message "5405  RADIUS Request dropped", what does it meen ?.
    We have implemented 802.1X on a C4506 switch running IOS 12.2(53), it has worked fine for about 3 months but now I get users not able to authenticate. In the loggs on the ACS I get the obove message.
    ACS 5.2 is running 5.2.0.26 Build 3075.
    Has anyone have hade the same problem ?

    It's fixed in 5.3...
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/release/notes/acs_53_rn.html
    ...or stop/start ACS as a workaround till it's happen again.
    Kind regards,
    Ron

  • TS4036 Error Message:  This iPad hs not been backed up for 3 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi.

    How do I clear up this Issue?  Error Message:  This iPad hs not been backed up for 3 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi.
    I plugged it in and it is charging now.  It will not allow me to unlock it and when I push the 'ok' button for the error message, it still appears....will not go away.
    Do I just allow it to charge and it will automatically backup itself?  If not, what do I do?

    Hold the power and home buttons at the same time until you see the Apple logo, then release.  This will restart the phone and give you access again.
    To troubleshoot your iCloud backup, try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again.  If it still won't back up, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.

  • Im trying to activate my ipad and an error message'your ipad could not be activated because the activation server cannot be reached.Try connecting your ipad to itunes to activate it. can someone please help

    im trying to activate my ipad and an error message'your ipad cannot be activatewd because the activation server cannot be reached.
    How do I connect?

    You don't have access to a computer, some other options are...l
    Wait for a while and try again
    Try activating your iPad using another WiFi network
    Ask someone who does have a computer running iTunes for help.
    Take your iPad to an Apple Store and ask them for help.

Maybe you are looking for