Error message in Logic "audio configuration contains unknown items"

I am using Logic Studio with an apogee Duet and Mac Book Pro.
So far I love the apogee duet for it's simplicity and sound. I have
however started to receive this error message working with Logic Studio,
almost anytime I start a new track, add a plug-in or instrument, etc.
"Audio Configuration contains unknown items"
It did not do this from the very beginning but started after a few
sessions. I have tried re-installing the driver disc for the Duet but it still happens.
when it does pop-up i can click the ok box and after clicking several times
it will go away and let me proceed.
Could anyone please advise me.
thank you very much.

Maybe this happen bacause you put many additional info in your "Aple discussion" profile about the software that you use, but we can also say you the same as Logic message:
your detailed "Audio configuration" profile info contain a "unknow item"
Whitch is your audio interface?
G
PS: anyway, try to trash Logic preferences.

Similar Messages

Audio Configuration Contains Unknown items

Has this issue been resolved ?? I have been using Logic Pro 9 for 3 years and yesterday I encounter this issue. Been searching all over the internet and seems like there are lots of questions out there but I did not see any resolution ?? Thought I will post it here. I even ran Logic Pro in 32 bit mode. I usually run in 62bit, but nothing has changed. Please help !!!

Hey,
We have related problem...we have a project we started in Garageband '08 that developed "audio configuration is damaged" alert that leads to an ""audio configuration contains unknown items" alert after hitting ok. We have a Mackie Universal Control hooked up to our setup. We tried to load the project into Logic Studio, but the same messages pop up. In Garageband you can click past it repeatedly and get back to your project, BUT in Logic you can never get past the messages, and you have to force quit. Not sure if the Mackie control board caused this problem...don't have a solution yet and have not figured out how to extract the pieces of the Garageband project into a new project.
HELP!
Thanks,
Chaz

Error: "Audio configuration contains unknown items"

After a few sessions I did on a song I get this error message. The song continues to work. But from time to time this error appears.
What does it mean? And how can I eliminate it?

Maybe this happen bacause you put many additional info in your "Aple discussion" profile about the software that you use, but we can also say you the same as Logic message:
your detailed "Audio configuration" profile info contain a "unknow item"
Whitch is your audio interface?
G
PS: anyway, try to trash Logic preferences.

Error Message "No logical port exists to call web services" installing SM7

I am trying to use SLM to download a service stack. However, the option is not available in step 2.5. There is an error message "No logical port exists to call web services". I have performed the Wizard install, but the Wizard seems to have left out this step. I have looked around for documentation on how to configure the port, but cannot find anything more useful than comments to the effect that I should configure the port.

I found the problem, I think, although I am now on to the next problem. "Web Services for software lifecycle manager not available'.
The documentation is lacking. When the RFC connection is set up, the user id is j2ee_admin, using the install password. This is not specified anywhere in the install instructions that I could find, there is only a reference to a 'user id and password'.
The LPCONFIG is used to create a logical port, that ties the RFC to the LP. However, no name is specified that is to be used for the LP.

BluRay error message "code 6, audio buffer underflows. Total bitrate is too high near time = 000000 seconds."

Hello,
I’m trying to create BluRays using Encore and I keep getting the following error messages: ‘code 6, audio buffer underflows. Total bitrate is too high near time = 000000 seconds.”
For info, I created a H264 Bluray - NTSC 24fps master from an Apple prores HQ in Adobe Media Encoder. Duration: 52m, size: 11go. I'm on Mac OSX 10.9.5, the bluray burner is Samsung SE-506CB/RSWD and the BR disks are TDK Blu-ray Disc 50 Spindle - 25GB 4X BD-R - Printable.
I looked around in forums and tried the following without success: replacing disk name to shorter name without space, creating bluray without menu frame, I also tried with a Mpeg2 bluray master. I tried to export a new master but I can't seem to be able to change the audio bitrate.
Can anyone please help ?
Thanks.

Hi Stan, thanks for getting back.
I tried to create a new master from Media Encoder but I can only export audio in PCM, I don't get a dolby option. See pic below.
I tried a new project in Encore and chose PCM instead of Dolby in the preference menu, but I still got the same error. Should I try again limiting bitrate to 15 ? I was on 30 before.
Please help, I've already wasted 10 bluray and this is getting really frustrating!

I'm getting a error message when using Apple Configurator "unable to send ClearPasscode command to device"

I'm getting a error message when using Apple Configurator "unable to send ClearPasscode command to device"

Yes, that is correct. My spreadsheet has the following information in those cells if you want to compare yours on Monday:
Product Type
Application
|
AdamId:
<and a 9 digit number>
I ended up bringing the Macbook Pro home with me after struggling with it for a half hour at the end of a long day. I called and within 5 minutes the problem was corrected. The technician said they were getting calls all day.

Error message when burning audio CD from iTunes

I tried to burn an audio CD and got the following error message: "The attempt to burn a disc failed. The device failed to calibrate the laser power level for this media." Can anyone help?

I tried the patch because I thought if the drive was the same as the ones in dell that it would work, but unfortunately it didn't lol. I've tried 3 different brands of cd-r, no luck. I can burn a cd-rw which is a bonus I suppose.
I called my support helpline again, and was given the story that the problem is the itunes software and they are not prepared to help. They even said that the patch that dell released doesn't fix the problem even though I gave him the address to the forum saying that it did. Someone must be responsible for the problem, meantime I'm stuck in the middle, and it seems it is the tsst corp L632H CDDVD drive that is giving problems.

Error message and stuck audio disk

I'm getting the following error message at restart ""IOStorageFamily.kext was improperly installed and cannot be used. Go to vendor for update or reinstall." This appeared after I put an audio disk in the CD drive that does not appear on the desktop and will not eject. Anyone?

Once you extract the disc, reinstall the OS and then run Software Update to bring it back to 10.6.4. This procedure only removes and restores OS components, resolving your issue.

I keep getting an error message while connecting to the server ("Unknown error") and there is no way to reset preferences on Mac OS X.

My sync preferences keep disappearing and I keep getting the "Unknown error" error message.

Hi!
The sync infrastructure is having some issues and we are working to fix them as soon as possible.
Check this site for the latest updates: https://services.mozilla.com/status

Error message when trying to configure airport extremesure wireless device

Airport Utility can't configure my airport extreme. I keep getting error message "error occurred...make sure...connected via ethernet and try again (-6765)". I've tried everything, hard reset, etc. Very frustrated.

Try to "find" and configure the router with ethernet first. Set the wireless configuration and check for telling light. Then disconnect the ethernet, see what happens.

Error message on importing "checkmark field contains export value"

This is an example of an error message I receive upon importing my document into FC. "The checkbox field Member Y contains an export value. FormsCentral will record the checked state, but will not include the export value."
I need to know how to fix this. I am working with a multi-page form where the data input on the first page needs to copy over to the other pages. Only the checkmarks are affected. I can find it Acrobat Pro options where it shows the export value for the checkmarks but I need to know what I need to change that field to say in order for my form to work.
frustrated. I'm wasting too much time on this.

I have the same problem:
FormsCentral has successfully imported the PDF with the following exceptions:
The checkbox field 10000 contains an export value. FormsCentral will record the checked state, but will not include the export value.
The checkbox field DATA CENTRE contains an export value. FormsCentral will record the checked state, but will not include the export value.
How to solve? Do you send the form to [email protected]?
Many thanks!

"error message cannot start audio chat"

I have an imac g5 1.8ghz with an isight webcam and a 1GB of ram. I am trying to begin an audio conference but get an error message that the computer is not capbable of intiating a multiperson audio chat. All the other buddies have 10.4.5. Any suggestions I thought a G% imac could start a multiperson chat.

Hi Joe,
Welcome To The Apple Discussion Pages
Run the Cron scripts with one of the Utilities listed here.
12:38 AM Monday; April 3, 2006

Error Message when Burning Audio & Data DVD's and CD's

I am having a problem burning cd's and dvd's. I have a 20" iMac G5 with leopard installed. I have tried using iTunes and Toast Titanium 7 to burn and both wont work.
The error message I receive is
"The drive reported an error:
Sense Key = Medium Error
Sense Code = ox73, 0x03"
I am thinking my burner in my iMac is fried. Does anyone have a clue what is wrong with it? Should i just bring it in for service?
Thanks

I'm having the same problem (Sense errors) with an iMac G5 running 10.4.11; have no idea what's causing it I'm afraid, but it's driving me nutty. It coasters DVDs almost all of the time, but CDs seem to burn okay.
I'm upgrading it to 10.5 this weekend though; I had been hoping that Leopard might magic the problem away, but reading this has dashed that hope

When I use a simple form, I get this error message "Form communication is configured with an email address of..." and the person's email address did not get sent a message

I was unable to use the simple form to which I should simply put the email address of the person to whom the form should be sent to. I get this error message:
As a result of this, this person did not get any filled form response. Where did I go wrong and how can fix this.
Second question, I am using GoDaddy.com account and they have their own set of php form. If I want to use their php form, where in Adobe muse, can I insert their php?

Hello Tonchee
If you are seeing an Apple ID that is not yours, then you have purchased content on your iPad that is tied to that Apple ID. You would need to know that password or remove the content that is associated with that Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Finding an Error Message in logic?

I usually go to SE91 and do a "where used" on the message. However, sometimes it does not find anything.
Does anybody have another good way to track down error messages and where they live?
Thank-You.

Hi Tom,
First we have to check from which message id error message is showing after that got o SE91 and give the message id name and then search the message no which is showing the message.
Regards,
Sunil

Error message in Logic "audio configuration contains unknown items"

Similar Messages

Maybe you are looking for