Error message in loupe view

I'm using Lightroom 1.3.1 in Windows XP. Sometimes when I'm looking at pictures in a library using loupe view, instead of seeing an image I see a grey rectangle where the image should be. At the top of the rectangle there is an error message that says "There was an error working with the photo." At the lower left hand corner of the rectangle there is a message written upside down in red letters that says "Error - A2of Memory - B". Once this problem happens I can no longer display images that were previously displayed normally. If I restart Lightroom it goes back to normal. I think this problem is more likely to happen if I am moving through the images rapidly, not giving Lightroom enough time to finish each preview. Is there some way to avoid this, besides going through the images very slowly?

HI friend,
Just check whether the error is due to the custom error message or standard error message.
If its standard then you have done any mistake which has makes the view to exit. If its custom message then it should change after you have changed the message.
If custom message , Just try activating it completely and check again. Goto SE80 and activate the function group and see is it showing any error.
Thanks,
Sri Hari.

Similar Messages

  • Question on an error message in Event Viewer.

    Hi,
    I had a question on a error message in event viewer for BO 3.0
    Error Message:
    Tried to allocate 20 windows desktop but only able to allocate 17 of them.The system may have reached its windows desktop limit.Please contact your system administrator.
    Source:CR Processing server.
    I have seen this error message before in BOEXIR2 for DeskI services but never for Crystal Reports.
    What is the change in 3.0 architecture due to which we receive this error message for cr processing server.
    Thanks in advance.

    Please post this query to the Business Objects Enterprise Administration forum:
    BI Platform
    That forum is monitored by qualified technicians and you will get a faster response there.
    Thank you for your understanding,
    Ludek

  • Error Message in a view

    Hi ,
    I have a view, where I add entries using table maintenance generator. I have certain checks to be performed, those checks I have done in a subroutine which gets called in the event '01' before saving.
    Now if I get some error messages, the error message displays in the task bar, and I come out of the maintenance screen. I need the error message to appear in the same screen, where in the user can edit the entered values.
    I tried with message 'text' type 'e' display like 's'. still it doesn't work.
    Please help

    HI friend,
    Just check whether the error is due to the custom error message or standard error message.
    If its standard then you have done any mistake which has makes the view to exit. If its custom message then it should change after you have changed the message.
    If custom message , Just try activating it completely and check again. Goto SE80 and activate the function group and see is it showing any error.
    Thanks,
    Sri Hari.

  • Why am I getting an error message trying to view pdf files.

    When trying to open any pdf file, I have just started getting this message"
    The Adobe Acrobat/Reader that is running can not be used to view PDF files in a Web Browser. Please exit Adobe Acrobat/Reader and exit your Web Browser and try again.
    Why. I have made no change in my system that I know of. I get this message in IE8 or Firefox. I have Windows XP  Professional SP3. PC computer with plenty of RAM and Intel dual processors. So what is the deal. Why the message, I have not turned on Adobe Acrobat/Reader, so why am I being told to shut it down? Why have I never had the problem regardless of browser I use before?

    This is incredible. This problem has been going on for years according to the messages on this forum. Adobe? Are you listening? One person had 247,000+ views to her message. Exact same problem I am having today. Here is the error message in case the Adobe programmers have all gone to sleep.
    The Adobe Acrobat/Reader that is running can not be used to view PDF files in a Web Browser. Please exit Adobe Acrobat/Reader and exit your Web Browser and try again.
    When are you going to let us know what the fix is Adobe????

  • Error messages from Discoverer viewer in others languages (Greek)

    Hi, I'm using Discoverer Viewer 10g and I set the browser in order to see only Greek language.
    When I don't write a mandatory parameter into the initial parameter form I receive an error message as
    "parameters required for TASKS_CREATE_DATE_LL" (in English)
    where TASKS_CREATE_DATE_LL is the parameter requested.
    While for the LOV parameters the error message is written correctly in Greek (and shown into a form from the browser), for the normal parameter, as above, the error message is ONLY in English and written just under the parameter text box....
    Is there a way to show these errors also in Greek (always under the parameter text box) ?
    I also checked the pref.txt, but I didn't found nothing to set a language...
    Thanks in advance for your help
    Alessandro

    The application.log file, under the OC4J which running your Discoverer provider, should give you some hints about the problem you're facing.
    Peter

  • Error message "No store view exists in MM42" for Z transaction

    Hello,
    Please see below steps for Z t-code.
    Enter Trade Counter AU52.
    3. Enter Distr. Center AU01.
    4. Click Execute.
    5. Update article 1034414 with a new target stock.
    6. Select Line.
    7. Click Update line .
    8. Pop-Up Message will appear saying "1 article is ok for hard uplift"
    9. Error Message appears as "No store view exists in MM42"
    Kindly Suggest.
    Regards
    Venkat

    Dear Venkata,
    It seems a customize error, kindly get the help from ABAPer and find the root cause.
    Regards,
    Karna J

  • Issuing an "input missing" error message in a view!

    Hello,
    I've created a view in WebDynpro which is composed of one inputfield. I've created a method called checkString(), to check if the value entered in the InputField is valid. I wanted to copy an example i've seen from the same kind. Here is part of the code:
    msgMng = wdComponentAPI.getMessageManager();
    +       String value = wdContext.nodePurchase().currentPurchaseElement().getAttributeAsText("Stock");+
    +       if(value.length() == 0){+
    +            msgMng.reportContextAttributeMessage(+
    +                      wdContext.nodePurchase().currentPurchaseElement().getAttributePointer("Stock"),+
    +                      IMessagePurchaseSelection.INPUT_MISSING,+
    +                      new Object [] {"Stock"});+
    +            return true;     +
    +       }+
    The problem is i can't permanently modify IMessagePurchaseSelection class (The changes are discarded at every build). I guess in the example i've seen, the INPUT_MISSING constant have been automatically generated, so how can i do the same?
    public static final com.sap.tc.webdynpro.progmodel.api.IWDMessage INPUT_MISSING = new com.sap.tc.webdynpro.progmodel.gci.impl.GCIMessage( com.sap.test.glx.tutorial.wdui.purchaseselection.PurchaseSelection.class, "InputMissing", com.sap.tc.webdynpro.services.message.WDMessageType.ERROR );
    Best Regards
    Jean

    Hi,
    The problem is i can't permanently modify IMessagePurchaseSelection class (The changes are discarded at every build). I guess in the example i've seen, the INPUT_MISSING constant have been automatically generated, so how can i do the same?
    You have to make changes in the Message Pool of your component.(DC).
    Regards
    Ayyapparaj

  • 500 Internal Server Error message with youtube viewing

    Ok. Here's the issue. Many-but-not-every-time I'm using Safari and go to youtube to view videos I click on to view and this message comes up instead of the video: 500 Internal Server Error and then a page full of computer code.
    This has just started to do this. How do I correct this problem?

    I read about these reports often...
    http://forums.techguy.org/multimedia/671802-youtube-500-internal-server-error.ht ml
    http://www.worldlawdirect.com/forum/off-topic-messages/41075-youtube-google-serv er-down-07-14-10-500-internal-server-error.html
    http://www.google.com/support/forum/p/youtube/thread?tid=5a6d067942a4e123&hl=en
    Still, if you think it might be on your end, I think you should get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
    Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
    Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
    208.67.222.222
    208.67.220.220
    Then Apply
    DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.149.160.49 behind the scenes.
    These Servers have been patched to guard against DNS poisoning, and are faster/more reliable than most ISP's DNS Servers.

  • How to display an error message in maintenace view

    Hi,
    I have following requirement.
    I have a table. In the table, there is a field named REPORT which keeps an executable report name. When adding an entry i need to fill the field with an report name, which should exist in the system. The report name should not be include objects.
    Then I use search help HELP_TRDIR with import parameter SUBC = 1.  I also create a maintenance view for the table.
    Then my question is how to display a warning message if the report I input in REPORT field doesn't exist in the system. If I need to modify the generated objects of the maintenance view, how to do it.
    The reason i don't use foreign key is that it seems filter functionality is not availabe in the case with import parameter SUBC = 1.
    Thanks in advance,
    Best Regards, Johnney.

    Hi,
    You need to add your validation in the table maintenance events:
    Use the event : 01 - Before saving data to the databse table... for this purpose
    1) Go to Menu-> Utilities->Table mainatenace generator
    2) On the table maintenance screen->Menu->Enviroement-> Modifications->Events
    3) select an event 01 and give some subroutine/form name.
    4) Add your validation in the form(Note this form should be in the Func Group of the table maintanance genetaor)
    Regarrds
    Shiva

  • SearchProtocolHost.exe Error Messages in Event Viewer

    I see the following application error on SearchProtocolHost.exe several times a minute on my Windows 2008 R2 server. What is wrong and how do I fix this? I am using Office 2010 if it matters.
    Log Name: Application
    Source: Application Error
    Date: 09/03/2014 11:01:54 AM
    Event ID: 1000
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: IHE-DEV8NEW-11V.Americas.mittalco.com
    Description:
    Faulting application name: SearchProtocolHost.exe, version: 7.0.7601.17610, time stamp: 0x4dc0c63a
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x00000000
    Faulting process id: 0x387c
    Faulting application start time: 0x01cfc7906160b42c
    Faulting application path: C:\Windows\sysWow64\SearchProtocolHost.exe
    Faulting module path: unknown
    Report Id: 9f4d9c20-3383-11e4-b0f8-00155d9da6a9
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-03T16:01:54.000000000Z" />
    <EventRecordID>4901105</EventRecordID>
    <Channel>Application</Channel>
    <Computer>IHE-DEV8NEW-11V.Americas.mittalco.com</Computer>
    <Security />
    </System>
    <EventData>
    <Data>SearchProtocolHost.exe</Data>
    <Data>7.0.7601.17610</Data>
    <Data>4dc0c63a</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>00000000</Data>
    <Data>387c</Data>
    <Data>01cfc7906160b42c</Data>
    <Data>C:\Windows\sysWow64\SearchProtocolHost.exe</Data>
    <Data>unknown</Data>
    <Data>9f4d9c20-3383-11e4-b0f8-00155d9da6a9</Data>
    </EventData>
    </Event>
    Ray Pietrzak

    Hi Ray,
    à
    the CPU performance on this machine is near 100% unless I disable the Windows Search Service.
    Would you please let me know whether this Application error (Event ID 1000) still generate when you disabled
    Windows Search service to reduce CPU usage? Just a confirmation. Thanks for your understanding.
    Please run
    sfc/ scannow command to scan all protected system files. Meanwhile, would you please let me know whether install any third-party application in the Windows Server 2008 R2? Please perform
    a Clean Boot to eliminate software conflicts and check if this issue still exists.
    à
    I am using Office 2010 if it matters.
    Would you please let me confirm whether install Microsoft Office 2010 Service Pack 1? If installed, please
    open System Properties and navigate to Advanced tab, then click “Environment Variables…” button. In Environment Variables, please edit Path in System variables and then add the Office 14 folder to the end of it. Then restart the server and check if can help
    you.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Getting Error message when running viewer

    This is the only information in the message Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher \TempDesktoplate Builder for Word\fonts Run XDO Start
    Can someone tell me that the program is looking for?

    ok its sorted

  • I get this error message when i view my site on the internet

    it says Parse error: syntax error, unexpected T_STRING in /home/username/domainame-www/index.html on line 1
    can anybody tell me what this means and if it happened to you

    it says Parse error: syntax error, unexpected T_STRING in /home/username/domainame-www/index.html on line 1
    It's a misconfiguration of your server. See this note for some possible fixes. You might need to change servers:
    http://homepage.mac.com/thgewecke/parsingerror.html

  • Smart VIew 11.1.2.1 - Error Message  "Invalid Parameter"  in a pop up box

    Message leaves a bit to be desired.

    Thanks for the response.
    The message appears when the users attempts to submit data.
    Refresh works as expected
    Verified provsioning and security class access.
    2 different users attempted - each in a different AD group - same entity
    Works for other users in other divsions - (different entities)- have not ruled out a process management conflict - but would have expected a different error message.
    Smart View version 11.1.2.0.00 (Build 514)
    Loading to HFM 9.3.1.0.0.214

  • Illegal use of LONG datatype error message when i create materialized view

    Hello to all
    I want create read only materialized view replication environment two of our tables have LONG datatype when i create materialized view against on them
    I recieve this error message
    CREATE MATERIALIZED VIEW MDB.TOAD_PLAN_TABLE TABLESPACE aramis REFRESH FORCE WITH ROWID AS SELECT * FROM MDB.TOAD_PLAN_TABLE@arahisto
    Error report:
    SQL Error: ORA-00997: illegal use of LONG datatype
    00997. 00000 - "illegal use of LONG datatype"
    Do you know any resort solution for it?
    thanks

    You can not use longs in materialized views over a database link, you can however take a part of a long over to a materialized view.
    I have gotten this to work in the past l had to create a PL/SQL function that you can use to extract the character data from the long column and use that to
    as part of the function you will need to pass in the columns of the table that will identify the unique records so you can pick out the long column
    example function
    -- you will need to make sure this funtion is in the remote location as you can not select longs accross a DB LINK.
    CREATE OR REPLACE FUNCTION MDB.TOAD_PLAN_LONG_CONV
    (pass in the primary key columns for the table)
    RETURN VARCHAR2
    IS
    v_long VARCHAR2(32767) ;
    BEGIN
    BEGIN
    -- need to select the long column into the PL/SQL variable
    SELECT long_column
    INTO v_long
    FROM MDB.TOAD_PLAN_TABLE
    WHERE key_columns = passed columns ;
    EXCEPTION
    WHEN OTHERS THEN
    IF SQLCODE = '-01406' THEN
    NULL ;
    ELSE
    RAISE ;
    END IF ;
    END ;
    RETURN SUBSTR(v_long,1,4000) ;
    END ;
    Then when you create the materialized view utilize that function on the long column.
    create or replace materialized view MDB.TOAD_PLAN_TABLE TABLESPACE aramis REFRESH FORCE WITH ROWID
    AS
    SELECT column1, .... columnx,
    MDB.TOAD_PLAN_LONG_CONV@arahisto (primary key column list) as long_column_name
    FROM MDB.TOAD_PLAN_TABLE@arahisto ;
    See if this will work for you? Keep in mind however this solution will not get the entire long column only as much as a PL/SQL variable will hold of it.
    Mike

  • Error message when viewing CHM file

    after successfully creating the .chm file. when I go to view it, I get an error message in the view window stating "Navigation to the webpage was canceled" My contents show on the left side of the window.

    Hi there
    It would appear you are trying to furnish an image and you are trying that by replying via email with the image either embedded or as an attachment.
    Unfortunately those don't survive the trip into the forum post. If you have an image to show, please visit the forum web page where you started this thread and use the camera icon to insert the image.
    Cheers... Rick

Maybe you are looking for

  • How can I list the songs in an album in iTunes without having to do it one by one? Some albums are not numbered.

    How can I list the songs in an album in iTunes without having to do it one by one? Some albums are not numbered or they show 1. 1. 1. 1. 1. 1. 1.

  • How do I turn off tabs in Safari 3.0.4?

    None of the tabs check-boxes are checked in Preferences and I selected View>Hide Tab Bar. When I click on a bookmark folder, the tab bar appears and Safari attempts to load every site in the folder. Is there any way of turning this off?!! Thanks!

  • How to get older versions of Turbo Tax to run on Mountain lion

    I've been using Turbo Tax for my taxes for the last 13 years and today I had occasion to open up an old one 2003 to look for a form. Unfortunately it wouldn't open up I  got this message   " You can't open the application "TurboTax 2003" because Powe

  • Debit Note issue ?

    Dear All Experts , Greetings for the day ! Can any one please tell me that can I print  Multiple Debit notes ? Currently following procedure is : - 1 ) Pick one document number   2 ) Go to FB12 create correspondence request with type SAP19. 3 ) Go to

  • Need help about mterial?

    Hi, I need ur help . i dont have any material on ABAP. i am not having much internet facility,so if u have any material about Reports,bdc,scripts  an material please give me .