Error Message in selection screen Status bar is getting truncated

Hi Guys,
Error Message in selection screen Staus bar is getting truncated (full message is not getting displayed).... can anybody tell me how to reslove this

Hi
Maimum we can give the error message length is 50 char. If you give more than that it will get truncated.
What you can do this split 50 and 50 like that you can give 200 chnars.
Data : Text1 type char50
Text2 type char50
If sy-surc ne 0.
Message Text1 Text2 TYPE "E'' or 'S'
endif.

Similar Messages

How to show message on selection screen status bar if alv is empty.

Hi,
Can anyone tell me how to show message on selection screen status bar when our final internal table or alv is empty .
i am getting message on alv status bar, where no data is in alv but i want to stop it to selection screen and show message there only.
Regards,
Ranu

Hi,
After populating the final internal table do this check,
if it_final [] is initial.
message 'No data available' TYPE 'S' DISPLAY LIKE 'E'.
exit.
endif.
This will be displayed in the selection screen itself
Regards,
Vikranth

Error message in Selection Screen

Hi
reference no (p_ref) is in my selection screen.
If this field contains special characters (\ / : * ? " |, ) system must prompt error message in selection screen. How to do this. Pls help me
Regards
Anbu

after input form the user
use if condtion
and validate the field and through message.........
Reward IF........
Regards
Anbu
Edited by: Anbu B on Jun 17, 2008 8:04 AM
Edited by: Anbu B on Jun 17, 2008 8:06 AM

Custom error messages in selection-screen

Hello All,
I have one query. I have developed a vendor aging report. In the SELECT-OPTIONS, there are 5 fields namely company code, business area, vendor group, vendor code and cash management group. What the user wants is if he enters any invalid value in any of the 5 fields, custom error message should be displayed like 'invalid company code' etc. I think we have to write these messages in 'at-selection-screen' event. Can u help me out with a sample code snippet w.r.t the above program? I have written the code as:
AT SELECTION-SCREEN.
IF S_BUKRS ne BSIK-BUKRS.
MESSAGE e000. 'invalid company code' TYPE 'E'.
ENDIF.
But not giving the correct output.i.e. even if I enter a valid company code, the error message is displayed. Can u help me in solving this problem?
Thanks and Regards,
Satvik
Edited by: Satvikpanchal on Jul 22, 2011 9:42 AM

Hi,
use AT SELECTION-SCREEN on S_BUKRS-low.
Use select query for checking the Company code in T001 table check the
Company code already exist or not? If it is not there show the message.
Code like
AT SELECTION-SCREEN on S_BUKRS-low.
select single bukrs into lv_bukrs
from T001 where bukrs = s_bukrs-low.
if sy-subrc NE 0.
MESSAGE e000. 'invalid company code' TYPE 'E'.
ENDIF.
i think you company code is select option so you have to check S_BUKRS-high also.
using the event AT SELECTION-SCREEN on S_BUKRS-high.
Regards,
DHina..

Throwing error msg in selection screen

Hi all,
I want to throw one error message in selection screen .
This message is of more than 1000 chars. and i want to show these 1000 chars in a pop up window and when i press 'TICK' mark, it should stay only in the selection screen . It should not go to the output screen and it should not leave the transaction either..
Can anyone help me in this by providing the coding for this..
Regards,
Shanthi

Hi Shanthi,
Your requirement is fulfilled by standard SAP message processing. Through message maintenance (TCode SE91), you define a message with a long text.
Let us say the message class is ZSHANTHI and the message number is 025. Besides the message short text you defined say 'Something wrong with &. Refer Long Text', un-check the checkk-box 'Self Explanatory', choose this message number and click on 'Long Text' button on the application toolbar. You will get long text editor and you can compose your 1000 lines or even 1000 pages story there.
Now let us see what you need to do in the report program. Your requirement is 'Issue the error message. When user hits Tick, display long text in a modal window and later stay in the same selection screen'.
You just issue this message in AT SELECTION-SCREEN event as:
MESSAGE e025(ZSHANTHI) WITH 'requirement'.
The error message will display on the status bar and when user hits the message X button, the long text with your story will appear in a modal box and still selection screen stays.
If your client is adamant in having only 'Tick' mark (this sucks me), you can add DISPLAY LIKE 'S' addition to the above message statement. But this addition works only 4.7 upwards.
If you want to issue this error message in list processing events like START-OF-SELECTION, then, you need to issue the following statements:
MESSAGE s025(ZSHANTHI) WITH 'still weird requirement'.
Note the message type 'S' above.
LEAVE LIST-PROCESSING.
Hope this helps.
Regards
Suresh Radhakrishnan

Itunes wont launch, no error message, no blue screens, just wont open

itunes wont launch, i get no error message, no blue screen, it just wont open. I've tried to delete and reinstall, but once i close itunes i still have same issue. it wont open again.

I have same problem on my XP lap top and Windows 7 PC. Apple have been investigating this problem for me for a week now without success so far. Understand it 's ongoing with other customers as well.
It is caused by an bit of program called APSDaemon supplied by Apple in latest i-Tunes. Your quick fix to enable you to open i-Tunes again is as follows:- open Task Manager (right click bottom toolbar), click on Task Manager, select Processes. Find APSDaemon, highlight and press END PROCESS. I-tunes will now re-open ok. You have to repeat this every time you want i-Tunes re-opened until you switchoff or restart.
A pain I know, but lets you keep going until Apple repair and release an update for i-Tunes

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Transfer Purchase Order - Error message "Field selection ZTR not defined"

Hi all,
I've customized a new transfer purchase order type : TRA.
When I go to ME21N and choose TRA type, SAP displays this error message :
"Field selection ZTR not defined
Message no. ME028
The field selection required by the system is not defined in table 162.
Further processing is currently not possible."
How can I fix that please ?
Regards,
Bahia.

Hello,
Check in IMG - MM - Purchasing - Purchase order -define screen layout - Check any field selction ZTR has been configured. And also check in Purchasing - purchase order - define document types - your PO doc type has reference to field selection group ZTR - if yes change it..
Regards
Mahesh Naik

Error in adding selection screen fields

Hi All,,
I am getting error when i add a selection screen parameters in module pool.
I copied stadard program to custom one, when I add an input field to screen it gives information message saying
"Selection screen: Report generation makes screen changes ineffective".
If though if i add the selection screen, when i relogin newly added screeen disappears.
Can any one y this is happening?

Hi,
You can find a lot of posts on the SDN. Please search for them.
[What create docking container on a subscreen?]
[Query Regarding 'cl_gui_docking_container'] are a few

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? Thanks

Try
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

InfoPackage error message "Subsequent update (requests) : Status unknown "

After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown " and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
Thanks!
Luda

Hi,
Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
If possible let me know what is error message.
Regards,
Vishwa.

Error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was

I recently purchased/upgraded from Premiere Elements 5 to Premiere Elements 9 and I cannot open the projects in version 9 that were created with version 5. It shows it as offline. I get a message to open up a file and when I do i receive the error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channels. Can someone help me or tell what I am doing wrong? All of my projects that were completed in version 5 cannot be opened up in version 9.
Thank you.

Bill,
I ran G-Spot on one of the files and here it what I have:
DVD "VOB" format
MPEG-2 Program Stream << { 1 vid, 1 aud }
Sys Bitrate: 10080 kb/s VBR
I guess I am really confused. The project that I am trying to open PrE 9 was completed in PrE 3 w/templates , scenes, etc. The movie was burned to a DVD. I cannot understand why I cannot open it with a newer version of PrE. According to G-Spot (I am assuming this is what you mean above), it is already in 2 channels. To me this should be ok. I put many, many hours into these videos and now it seems all for not.
Here is what I did so far:
I uploaded the required media files to a new project in PrE9 and let them index and conform. I saved the project with the same name in a different location. Do I have to do this to the project files and/or the original media files? Confusion starts here.
The next step is where I am confused. I do not know if I am proceeding in the right direction from here. There is the share tab in the upper right hand corner. Is this what you are talking about? I am truly lost from here.
Thanks.

My iphone 4 has an error message on the screen that reads "iphone disabled connect to itunes" what do i do

My iPhone 4 has an error message on the screen that reads "iiPhone disabled connect to iTunes" I've tried connecting and can't get anywhere what do I do and what is the problem?

Your phone is disabled for some reason. Maybe you entered the wrong Passcode too many times. In any case you need to do just as the phone is instructing you to do. Start the latest version of atones on your computer and connect your phone. iTunes should guide you through the process of getting your phone working again. Here's a link to an Apple support page on this:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

. I have an iCloud error message on the screen.

The screen on my iPad is frozen. The hard reset does not reboot the iPad. I have an iCloud error message on the screen. That I can't get rid of.

Thank you. I had tried this before with no success. However, I tried it again. The problem is I don't know who to reboot without a keyboard. I can't get to the on screen key board with the screen locked up.
The error message I get is " iCloud Backup This iPad hasn't been backed up in 2 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi" at the bottom of the message is an OK button.
Now with the iPad removed from the keyboard:the screen will stay lit for about 5 seconds and then go blank. Turning power off and on brings up a blank screen with the iCloud message and the slide to unlock. Touching the OK button causes a brief flutter of the button. Trying to slide the slide to unlock accomplishes nothing, since it won't slide.
The battery was at 49% when the problem occurred. I have since recharged the battery to 100%. I tried earlier to reboot with the iPad connected to AC.
Again, thank you for your suggestions.

How to display error message on the screen

I am new to WD world and need all possible steps to resolve the following issue.
I need to display the error message on the screen if any required field is empty when user click on SAVE button.
I have set the attribute GO_MESSAGE_MANAGER and check the both box for PUBLIC and REFTO and set the associated type IF_WD_MESSAGE_MANAGER under COMPONENTCONTROLLER.
Under the method of COMPONENTCONTROLLER set the value WD_THIS-GV_NAV_FORBIDDEN = IV_NAV_FORBIDDEN. Which is type IMPORTING of associated type WDY_BOOLEAN.
GV_NAV_FORBIDDEN has been set to attribute WDY_BOOLEAN in the COMPONENTCONTROLLER.
Under the ACTION (on SAVE button) of my default view (VW_DEFAULT) I am doing the following.
IF lv_f_name IS INITIAL
    CALL FUNCTION 'BALW_BAPIRETURN_GET2'
      EXPORTING
        type   = 'E'
        cl     = 'HRRCF0002'
        number = '020'
      IMPORTING
        return = ls_return.
    lv_message = ls_return-message.
NEED TO PUT CODE TO PASS IT ON
ENDIF.

The thing I can not figure out is the input parameter of this call. My CONTEXT has a node1->node2->node3->f_name.
CALL METHOD lo_message_manager->report_attribute_error_message
EXPORTING
    message_text              = lv_message
    element                   = HOW WIILL YOU FIND THE VALUE OF THIS
    attribute_name            =
   params                    =
   msg_user_data             =
   is_permanent              = ABAP_FALSE
   scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
   msg_index                 =
   cancel_navigation         =
   is_validation_independent = ABAP_FALSE     .
wd_comp_controller->set_navigation_forbidden( iv_nav_forbidden = abap_true ).

Error Message in selection screen Status bar is getting truncated

Similar Messages

Maybe you are looking for