Error Message In SMQ1

Hi Expects ,
While working with SAP CRM 5.0
In smq1 (outbond Que ) we are getting staus SYSFAIL Message.with following more details
"function mod for object could not be clearly det ."
Additional information :when i collect more information of transaction from user found that there is error in INTERACTION RECORD
if i analysis futher crmd_order transaction in partner tab one of the partner function is added like person responsible or one of the funtion like employee reponsible is not there
if i correct add/delete partner function it seems issue is resolved .
can you share your views on this
Many Thanks
pravin shete

Did you check that mapping is correct in the proper language chipher, becuse on ECC partner function chiphers can have different chipers in different laguages. E.g. AG can also be SP for Sold-to party.
Also does this happen only with partner function that uses empoyees and is this the only function that uses employees? If yes, check if numbers for employees on crm side are mapped with hr numbers on erp side.

Similar Messages

Error message in trans code SMQ1(backend) for material replication

Hi All,
I am wandering if someone can help me with this query. I have basically followed all the customisation steps requried to replicate replicate material masters from R/3 to SRM. I had infact closley followed the advise posted on the blog: How to replicate material master from R/3 to SRM
However, once I start the initial load in SRM with trans code R3AS and thebn goto trans code SMQ1(in R/3 backend), the load has failed with the 'status' or SYSFAIL. When I double click on this message, I get the error:
"Exception condition" EBCDIC_PROBLEM__OSSNOTE_33300 8" raised.
I have looked at note 333008 but cannot find any clues as to what is causing the load to fail. In trans code R3AM1, the job's status only remains as 'Running' and does not change.
Any pointers as to the cause and required workaound would be appreciated!
Thanks
SW.

Hi Muthu,
Thank you for your feedback. I have just this moment implemented the note you recommended, but this does not appear to have resolved the error message, even though the consumer has been changed from CRM to SRM in r/3 and srm.
I basically undertook the initial load for object 'dnl_cust_basis3' only with trans code R3AS, but the system still shows the following error message in the outbound que list (trans code SMQ1) in the sender R/3 backend system:
""Exception condition "EBCDIC_PROBLEM__OSSNOTE_33300
8" raised""
I am reluctant to implement the note number (333008) within the error message as the note heavily describes the CRM 2.0 component only and shows little relevance to SRM 5.0.
Any feedback would be appreciated. I have pasted the note contents below.
Thanks
SW.
Note 333008 - XML in R/3 Adapter
Summary
Symptom
For the Plugin PI 2000.1 (R/3 OLTP) and the CRM 2.0B Support Package 08, the R/3 Adapter was enhanced by an XML support.As of CRM 2.0B Support Package 7, SAP recommends to use R3A XML as a standardAs of CRM 2.0C, XML is automatically the standard setting in the server, only in the OLTP PlugIn, you have to maintain a setting.
Additional key words
CRM, R/3 Adapter, XML, CRM_SEND_XML, BAPIMTCS, IBM, AS/400 OS/400 S/390, DBIF_RSQL_SQL_ERROR, SQL error -302 accessing table SMOAUSP
Cause and prerequisites
System requirement:Plugin PI 2000.1 with at least PlugIn patch 03 or higher and CRM 2.0B Support Package 08 or CRM 2.0C on the server.(XML is possible with CRM 2.0B Support Package 07, however, Support Package 08 is recommended:if you only use Support Package 07, parameter CRM_CONVERT_ENDIAN has to be maintained even if this has no effect - see Note 207264.)
Solution
Introduction
To eliminate or minimize problems that occur during the data transfer between different operating and computer systems, an XML interface was implemented in the R/3 Adapter in addition to the binary transport, which has been used so far.
This XML interface consists of an XML generating program on the OLTP-Plugin and an XML parser on the CRM.
The generating program generates an XML document from the data stream to be sent to the CRM System and the XML parser converts this back into the original data stream. Except for the initial configuration, the mechanism is transparent and does not require further user activities.
Activation
To use XML in CRM 2.0B in the initial download, you have to enter the following new parameter in table SMOFPARSFA (Transaction SM30 or R3AC6) on the CRM server:
             Key:             R3A_COMMON
             Parameter name: CRM_SEND_XML
             Parameter value: 'X'
In CRM 2.0C, table SMOFPARSFA does not have to be maintained since XML is automatically the standard setting.
For the data transfer with XML in delta download you must do the following
Maintain parameter table CRMPAROLTP in PlugIn Release PI 2000.1, patch 03:Newly enter parameter name CRM_SEND_XML_FOR_DEFAULT_DEST with parameter value 'X'.
Maintain parameter table CRMRFCPAR as of PlugIn Release PI 2000.2:Transaction SM30, set field SEND_XML of CRMRFCPAR to value 'X' for the corresponding entries
Advantage
The data transport in the XML format solves both the endian problem (see Note 207264) and the code page problem which existed during a data transport from or to an IBM mainframe (AS/400, S/390) to or from an ASCII-based system (NT, UNIX).
Deactivation
Regarding the performance, the XML format has the disadvantage that the XML parser needs CPU time (which can be processed in parallel because no database access is made).If you want to do without the XML conversion in a specially defined system landscape, then set parameter CRM_SEND_XML to blank in the CRM System, and set table CRMPAROLTP (PI 2000.1) or CRMRFCPAR (PI 2000.2) without XML in the R/3 OLTP.In addition, parameter CRM_CONVERT_ENDIAN must be maintained correctly in the CRM System (see Note 0207264).
You can do without the XML conversion under the following conditions.
1. The OLTP system infrastructure and the CRM system infrastructure mustbe homogeneous. Example: all OLTP application servers UNIX and all CRMapplication servers NT.
2. You must also make sure that no application servers with different operating systems are used in future.
3. The OLTP system infrastructure must be homogeneous.In the CRM System it is possible to limit the application servers permitted for the processing of the queues by setting a specific server group.The application servers of these group servers must be homogeneous.However, the setting is valid for all inbound queues and cannot be restricted to specific queue names.
              You can set up a server group with Transaction RZ12, and in Transaction SMQR you can set up the server group used for the processing via menu option 'Edit' -> 'Change AS group'. For details on this, see Note 369007.
As SAP cannot check the customer's system landscape,this option is to be classified on project basis where the responsibility is the customer's and not SAP's.
If homogeneous system infrastructures do not exist, the time required for saving data and documents can nevertheless be significantly reduced by carrying out the XML conversion in one asynchronous step.For this, you must maintain parameter CRM_XML_BACKGROUND_PROCESSING_ON in table CRMPAROLTP. For this purpose, refer to Note 350176.
Notice
Since the IPC is currently not able to process the XML document of the R/3 Adapter, XML must not be activated for IPC targets in CRMRFCPAR!
Since, in addition to the existing data mapping and data transport, the XML generation and the XML parsing is included in the sequence of operations, you must expect a download runtime which might be twice as long as usual!
Due to performance reasons, only the '&', '<' and '>' characters are converted into XML escape sequences at present.Therefore, other special characters in text fields might cause problems and might not be output correctly on the target system.
The XML conversion does not solve problems with multi-byte texts, for example the data exchange between a Japanese and an English codepage is not supported.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 25.07.2001 22:00:00
Priority: Recommendations/additional info
Category: Special development
Primary Component: CRM-MW-ADP Middleware Adapter
Secondary Components: CRM-MW Middleware
Affected Releases
Software
Component Release From
Release To
Release And
subsequent
MDM 200 200 200
COM_CRMMDM 40 4.0 4.0
UIFRW 40 4.0 4.0
CGVMIC 10 100 100
BBPCRM 2.0 20B 20C X
BBPCRM 3.0 300 300 X
BBPCRM 3.1 310 310 X
BBPCRM 3.5 350 350 X
BBPCRM 4.0 400 400 X
Correction delivered in Support Package
Support
Packages Release Package
Name
BBPCRM 20C

Error message "Data cannot be maintained for set type COMM_PR_PUR_1

Hi
While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
For curioisity next I selected all such error logs & deleted. It gave me one warning (some inconstinecies error) which I ignored. After that I checked SMQ1 of R3 & SMQ2 of SRM. No log
But I observed a strange thing. Whatever material codes I am creating it is going straightway to SRM without running R3AS transaction. I checked R3AM1, selected the row and cancelled. But still going without any interferrance. Why ? How shall I stop this.
Thanks

Hello,
>
BNR wrote:
> Hi
> While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
>(...)
Have a look at OSS note 1049693 - Data cannot be maintained for set type COMM_PR_PUR_1.
Regards.
Laurent.

Error Message"ERP adapter is called" for CRM sales order replicate to ERP

Hi All:
In our implemenation project, we use CRM7.0 stanard sales order type TA for sales order creation. And we did all the right configuration for sales order at CRM side. CRM sales order can be saved correctly.
But this CRM sales order couldn't be replicate into ERP, as in Middleware the corresponding BDoc message is yellow light and Error messsage show "ERP adapter is called".
Is anyone have same issue before, please kindly advise how to handling this issue and prossibile solution?
Best regards:
Kai

Hi Kai,
Is there any queue entry on transactions : SMQ1/SMQ2 with SYSFAIL status. If so, what is the error message it is showing?
Are you able to process the order further? Or getting an error message like "Document being distributed" or something?
Good luck,
Aaru

Error Message: Change of update mode not possible due to open V3 update

Hi Gurus,
I got error message when i change update mode (LBWE) from V3 to Direct or Queued delta method.
Error Message: Change of update mode not possible due to open V3 update
Long text: You are not allowed to change the update mode for application 11 from V3 to another method. This is because there are still V3 update entries for update module MCEX_UPDATE_11 that have not been processed yet.
Pls anyone give solution for this.
Thanks
Muthu

Hi Sreeni,
i did check in all the below Tcode as you adviced.
1. Clear all record at SM13, LBWQ / SMQ1, Setup tables, RSA7 for particular datsasource or application..
2. For LBWQ provide date range and delete not required records.
I did not get the 3rd point " Need to clear in CLINTS of R/3 system" of your reply.
what does that mean?
I checked all the above tcodes and got the same message as no queue or data exists".
I went SBIW tcode and activated my data source and try to change the Update mode but still it is throwing error message as "Change of update is not possible due to open V3"
Please help me out.
It will be very helpful for me if you could share steps or docs regarding this issue.
Thanks,
Shailaja

Restarting Error Message

Hi all,
I am reading this blog /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically and trying out the restarting of error messages.
I have purposely created a message mapping error. However, when i look in sxmb_moni, the message did not restart after the error.
In the blog it mentions that
IS_Retry A batch job( internal in XI) is automatically scheduled to reprocess the entry after 2 minutes.
Is there any settings that i am missing out?

message mapping error
As you mention the Message mapping error this you will find in SXI_MONITOR.
Blog you mention is talking about SYSFAIL error in queue trax SMQ1.
Are getting the same error?
Gaurav Jain
Reward Points if answer is helpful

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error message into a Variable.

Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!

Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a®

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod Touch will no longer sync...error message.

For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone?

What is the exact wording of the error message?

Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive. The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache. There are 4 files in there that are taking up 124 GB! Can I simply delete these files or will it corrupt my regular files? I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

Yes, you can delete the cache files manually, Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches. Depending on your files, that can take a few minutes or several hours.
A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

Error message when installing Photoshop CS2 in Windows 8

I just upgraded to a computer with Windows 8. I use Photoshop CS2. I am getting the error message below when starting photoshop after installation. I changed program folders, but that did not work. Please advise.
Error: an error has been detected and activation cannot continue. Please restart your computer and reinstall application.

http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Error Message In SMQ1

Similar Messages

Maybe you are looking for