Error message in System Prefs Screen Saver/Desktop
: When I try to open Screen Saver or Desktop Prefs, I get "There was a problem connecting to the server 'iDisk.mac.com'". I have a new MacBook Pro with Mountain Lion. How can I change the prefs, and stop getting the annoying message that again pops up as soon as I click "OK"?
Triple-click anywhere in the line below to select it:
grep -R idisk ~/L*/Preferences
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste (command-V) into the Terminal window.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.
Similar Messages
-
Odd system prefs: screen saver behavior
I don't understand why, but it seems that now most of the albums in my screen saver pane do not load correctly. Some load with correct photos and photos from other albums. Others only read as having the same two photos. What is going on?
iBook G4 Mac OS X (10.4.8)Triple-click anywhere in the line below to select it:
grep -R idisk ~/L*/Preferences
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste (command-V) into the Terminal window.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
If any personal information appears in the output, anonymize before posting, but don’t remove the context. -
I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
I get the same message when using Numbers so I presume it is a OS problemSome of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
▹ Restart
from the menu bar. -
Error message when we try to save a journal template / table
Could anybody help us?
Attached you find the error message , when we tried to save a journal template:
We're using BPC Microsoft Version 7.5.104
#ERROR#AdminJournal##EPM-BPC-MS##2fe9a7f1-484d-429f-9a1b-7f155d5ea8a8###clsExcelHandler::SetExcelHeader#CDI
Administrator########Plain##[LOG ID:13]System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to interface type 'Excel.Range'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00020846-0000-0000-C000-000000000046}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
at Excel.ApplicationClass.get_ActiveCell()Check and make sure that you can visit http:[server]/reports, for the reporting server. Does that work? If yes, I would make sure your DB has the APPSET_EXTRA database in addition to the APPSET in SQL DB. Also, when you process the Applications, via MOdify (full process), does it fail on step 8?
I have seen this before and it seems to be related to getting the structure correct for the Reports and reporting services. Hope this helps. -
Error message"Could not complete the Save command......
Sometimes when I open Photoshop CS6 (cloud version) and I try to save my work I wil get an error message: "Could not complete the save command because the document is currently being saved in the background. Please try the operation again after the Save Command has finished" Well the background save never finishes and I end up having to restart Photoshop and lose all my work. Any ideas. I am running Windows 7, core i& quad procewssor and 12 gigs of ram.
ThxHi Chris!
Yes. I did that after the first time it happened and then it happened again. Here is my system info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 6264 MB
Memory available to Photoshop: 10996 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 6800 Series
Display: 1 -
Error message "The system cannot find the file specified." when reinstalling C3180 drivers
Hello,
I experienced scanning problems with my C3180 and the error message indicated several solutions, including to reinstall the driver.
I worked my way through the list of fixes to this option. I uninstalled the drivers, downloaded
File name:
AIO_CDA_NonNet_Full_Win_WW_130_140.exe [1/1, 290.27M]
from www.hp.com/support and attempted to install.
Just after the accept licensing screen, the system begins a screen with four steps, the first of which is Checking System. Shortly after starting this, I receive the error message "The system cannot find the file specified.". The file name may be in the message header, but I cannot determine it due to the path length. It is off the displayed screen. (see screen image capture)
Closing the pop-up error message or clicking OK terminates the installation.
I am re-installing on a Dell Latitude E6510, running Windows 7 Professional, Service Pack 1, 64 bit. The printer was connected via USB, but I have disconnected for this stage of the install.
I appreciate any assistance/advice you can offer.
KellyHi justkelly,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are getting errors when attempting to install the printer to your computer.
I have a link that I would like you to click on. In the steps on the link, please do step 1 and step 2 seeing that you are using Windows 7.
Installation issues.
Please let me know if this resolved your issue. I will be more than happy to offer more assistance if the link does not resolve your issue.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.
Reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
Error message "Your system is low on memory"
I just installed Dreamweaver 8.0.2 and I occasionly the error
message "Your system is low on memory" appears. I only use
Dreamweaver for editing php and simple htm files. I have 2 gig of
RAM and Windows Task Manager says I have 1 gig free. This question
has been asked twice before in this forum over the past 2 years and
there has been no work around given. I have XP service pack 2 and
it has automatic updates turned on. Any suggestions?On Tue, 26 Sep 2006 19:13:33 +0000 (UTC), "Richard9908"
<[email protected]> wrote:
>Thanks for the two quick replys!
>
> David, I just disabled the Dreamweaver start-up screen
and restarted
>Dreamweaver so hopefully the error message will not pop
up again. It seems to
>pop up every one or two days. I'll let you know what
happens.
>
> Kat, I looked under the Processes tab of the Windows
Task Manager but I
>didn't do this until I restarted Dreamweaver so I'll
probably have to wait
>until the error message is displayed again (hopefully it
won't). My question
>is since I still have 1 gig out of 2 gig RAM free does it
really matter who is
>using the 1 gig?
>
> Thanks! Rich
Windows used to not do well with a lot of RAM, but I haven't
looked
into that for a couple of years. -
Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?
Find out what that third party software the kext file belongs to and update or use the developers method to uninstall the third party software responsible for it.
I suspect it's a iTunes extension perhaps?
You also can use the manual method of Finder > Go > Computer and opening your drive, then your System/Library/Extensions folder and looking for the file and moving it out onto the desktop, you will need to be in Admin user and use your password, then reboot to clear the random access memory. However this method doesn't remove the parent program you still need to do that.
How to uninstall/install software on your Mac
The kext file wasn't loaded, so it's not running, but removing it from the Extensions folder or uninstalling what put it there will solve your notification problem as that's all it appears to be. -
I paid for & downloaded zagat to go app from handmark & it fails to run on my bb tour. Here is the error message I keep getting on my bb tour - "Unable to load screen : root. ChangeLocation.ChangeLocationStart". I've tried everything, including uninstalling and reinstalling the zagat app and I keep getting the very same error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart".
btw, I have plenty of free space on my device. HELP!!!
I tried Handmark support several times, to no avail. Thanks very much. mikeI'm having the same problem. Have tried uninstalling, reloading, nothing. Also read something about do not select Verizon as a carrier, but to use bizB, however on the 7. (new version) I'm trying to install bizB is not an option. Help please!
-
Help! my windows PC with Vista will not dowload itunes 10.7. It gives me an error message: Your system has not been modified.I
I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone. Anyone facing the same issue or can point me in the right direction?You may get better information on that error message by reposting in the iPhone forums:
iPhone
It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than just "G4" will get you help faster. -
Customer error message in sales order on save
Hi Friends,
as per requirement i have to raise the error message and system should enable the field to change values. This should happen when condition is not met on Saving of Sales order.
For this, i have used the user exit USEREXIT_SAVE_DOCUMENT_PREPARE. But the problem is system throwing error message and all r in display mode only. as per my requirement system should allow to change the error value field.
i have verified many posting in this SDN, but nothing is working out.
Please guide me, how to raise the error message and system should enable that filed.
My doubt is where should i raise the error message in sales order (MV45AFZZ)??? if any badi to raise the error message also fine for me. I tried many ways like... message with display like..... and set / get parameters and badis.... but not able to find the correct solution.
Thanks in Advance.
BalaHi
You need to use check for enahcement spot, which will be help to you.
Bcz you are throwing custom error message in the standard transaction, once the error is display, you could not able to change the values. your prob can be solved by using the enhancement sport.
This is include name (Include:MV45AF0B_BELEG_SICHERN).
In the above include, you need to create a enhancement spot after this spot (ENHANCEMENT 16 OI0_COMMON_SAPMV45A.)
write your custom code and while displaying an error message. set flag = 'x', then use below code. It will display error message once you press ENTER, you will get the sale order in change mode, you change the values.
IF flag = 'X'.
fcode = fcode_gleiche_seite.
perform fcode_bearbeiten.
ch_subrc = 4.
exit.
ENDIF. -
H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information. -
I keep getting an error message re: System Extensions
Almost every time that I run Software Update or when Norton runs its automatically scheduled scan, I keep getting an error message saying, "System extension cannot be used. The system extension "/System/Library/Extensions/IomegaSAM.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update." I've also been having problems with Safari, in that when I've had a browser window open for a while and use it to go to different websites, etc., after I've gone to 2 or 3 websites it will then act like it's "stuck" and it won't do anything else until I close the window, quit out of Safari, and start it up again. Then it will be fine and work for a while, until it does the same thing...again.
Are these items somehow related, and how do I fix this?Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry -
Trying to export my forms results to excel error message is adobe can not save as the file is open
trying to export my forms results to excel, error message is adobe cn not save as the file is open in another location, however, no other file is open.
Thanks for continuing the help, but it is a medical realted form and I will just keep it confidential at this time.
Larry Lakes, Executive Director
The HANDLE Institute
[email protected]
541-639-1588
P. O. Box 6264
Bend, OR 97708
Maybe you are looking for
-
How to access last object in a Collection.
Hello. I'm trying to figure out how to access the last element in a collection. This is how I have it coded now: Collection coll = someMethodThatReturnsACollectionOfMyTypes( ); Iterator It = coll.iterator( ); MyType myType = null; while ( It.hasNext(
-
Hi all, One quick question, I was going thru some OSS note and it had some correction instructions and support packs.. I just want to check the code on the CRM side. What is the transaction where i can go and check the code. The note says: Object: ME
-
Hi, I have error code when trying to go into blackberry app world, I have deleted and reloaded, tried downloading previous version nothing works?
-
Hello everyone I wanted to ask a Question. I was working in design view in Dreamweaver. I inseted table 5 rows and 1 column. Second and fourth rows I devided into 5 columns but when I try to chnage the width of columns in fourth row I also change the
-
I'm trying to trace this complex signature in Illustrator and I'm having a tough time with it. I've tried different tools: Pen, Pencil, Curvature, but I'm still having trouble. But I'm actually not sure which tool would work best for this example: Pe