Error message in the BW role upload

Hello Guys,
When I have uploaded a BW role in the portal in the following path: System administrations -> Transport -> Role Upload, the system has done the following message error: “Check system configuration for alias XXXX, system: null – failed to retrieve logical system idSEVERE: getObject”.
However, when I have gone to the Portal Content, in the following path: SAP Portal Migrated -> SAP Component Systems -> Roles, my BW role was created and it has two folders below that are empty. The reports didn’t come to portal.
I have tested the system that link the portal and the BW system, and works fine.
Can you help me please?
Thanks a lot.
Mary

Hi,
Please make sure that the alias of the system is the same as the logical name of the system.
The system alias must match the logical system name of the ABAP system.
Best Regards,
Assaf Klieger
Installed Base Development
NetWeaver Portal Platform
SAP Labs Israel

Similar Messages

  • I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

    I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

    Where are you hosting the site a what are you using to upload the site files to the server?
    OT

  • Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

    Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

    Hello Fellow iBook Authors!
    Today I received the same error that you all have been discussing.  I tried selecting the DRM
    and this did not work for me, though I'm glad it did for some.  Here's what I did as a work-around. . .
    Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v.  I added an image and extended the length or timing of the image to span the length of the audio file.  Then exported as an .mov.  I then opened QuickTime and opened the file and exported the file to iTunes. 
    You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file.  Does this make sense?  I hope this helps, at least in the short-term.
    Michael Williams

  • Initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
    Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
    Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
    Open cmd prompt and type "cd c:\temp".
    Launch the browser and open the PDF.
    Open task manager, sort processed by name. Two AcroRd32.exe instances  should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
    On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
    Perform your steps to cause the crash.
    Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
    Thanks in advance for all your help
    Ankit

  • Why do I get error message "There was a problem uploading a presentation"

    I've tried to upload a Keynote presentation to iCloud by dragging it from my Mac and dropping it into Keynote on iCloud. It begins to upload but within 10 seconds I get an error message:
    There was a problem uploading a presentation
    Try again later
    I've tried half a dozen times.

    exactly the same problem, and so far no solution, this after two weeks of senior advisors at Apple messing with my icloud account...

  • Error message 0x80004005 when trying to upload my photos to my pc

    Can anybody help?I'm getting error message 0x80004005 when trying to upload my photos to my pc. I'm trying to upload them all so I can free up space as the phone is telling me it's almost full.Most frustrating!!Corinna 

     That's a Windows issue but check this out https://support.microsoft.com/en-us/kb/914232  

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • How to add an error message in the application module?

    Hi,
    I have some code running in the application module. I want to display error messages in the messages section of the screen if an error happens in my code.
    How could I achieve this?
    I am using JDeveloper 10G
    Thanks

    Muhammed,
    Have you tried throwing a JboException in your AM code?
    John

  • Print a custom Error message in the XML bursting program's log file...

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

  • Trying to download iTunes 11.1 but it keeps giving me an error message saying: The feature you are trying to use is on a network resource that is unavailable.

    Trying to download iTunes 11.1 but it keeps giving me an error message saying:
    The feature you are trying to use is on a network resource that is unavailable.
    Click OK to try again, or enter an alternate path to a folder containing the installation package "iTunes64.msi" in the box below.
    Use Source:

    iTunes.msi
    Perfect, thanks.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • The restore session has stopped working. It tries to load, but then gives an error message that the script is not working and will not actually show the previous tabs I had open.

    I count on using the Firefox restore session feature. But it's stopped working. For the past couple of days, it hasn't worked a single time. (I haven't changed anything on my PC.) It just suddenly stopped working.
    Now it gives me an error message that the script has stopped working. It gives me a couple of options. I'm not sure of the exact wording, but one option is to stop the script and the other is to keep trying. But the keep trying never works.
    I have to stop the script, hence, the list with my previous tabs never comes up.

    Which file is mentioned as the cause of that script error?<br />
    Is that a file with a chrome protocol?

  • I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

    I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

    You need to be very careful which project you open in which version.
    For 2014 make sure its on 2014.1 build 81.

  • I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    Leslie Tanaka
    Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
    Let us go back over that Adobe document regarding troubleshooting damaged projects.
    3. Delete the Application Preferences
    Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
    7. Test to see if individual media files are causing the problem.
    That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
    I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
    I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
    Please review and consider.
    Thank you.
    ATR

  • Error message in the IDOC at item level

    Hi,
    Iam working on IDOC.when idoc failed i get the that idoc error message and displaying in the report at header level.But my requirement is to diplay the error messages at the item level.Is it possible to display the error messages at the item level?For example for IDoc number is 30000045.For this idoc number 7 line items is there like 1000,1001,1002,1003,1004,1005,1006,1007.i want error message line item wise.Kindly suggest me.
    Regards,
    Sujan

    hi sivaprasath,
    write the custme code as per your requirement so that it will do..user exit or badi .
    ~linganna

Maybe you are looking for

  • UPDATE of column in parent only UPDATEs first row in DENORMALIZED child table

    In the Repositiry in Designer 6i, I denormalized DESC1 column to pull the value of DESC1 in the parent table. The child table has four (4) records with matching foreign keys. When I go into my Form and update DESC1 in the parent, only the first of th

  • Problem in Gui and Component

    hi , i am developing a mobile application using j2me midp. I am using LWUIT for using create GUI, now i want some requirements. first one is i want editable combobox, that is to type the combobox like swing, it is possible in j2me midp or any other g

  • Open a PDF file in linux using java

    Hi.. How can I open a PDF file in linux using java. I am able to open PDF in windows and mac using this code in Windows Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + path_of_PDF); in mac Runtime.getRuntime().exec("open " + path_

  • IR Subscription - Multiple Email Address

    Hi, I need to email an interactive report to multiple email address. Is there a format to follow in entering multiple email address in the "Email Address" field if I want to add Subscription? Is it even allowed to enter multiple email address? Thanks

  • "Personal Edition" & "Oracle Database 10g for Linux"

    Is there a personal edition for "Oracle Database 10g for Linux" ?