Error Message in the CK11N

Hi Gurus ,
Costing variant ZFP1 does not belong to material cost estimate . I am getting this message kindly give me some light on that how can i include in the material cost estimate
Edited by: Er.SAP.IIT on Nov 10, 2009 11:49 AM

Dear Er,
Check in OKK4,the costing variants and the relevant dependent settings for valuation variant and the other settings for
control,Quantity structure,additive costs,update,assignments etc.
Ensure that you are using the one which is present here in OKK4 to do the cost estimate using CK11N.
Regards
Mangalraj.S

Similar Messages

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • How to add an error message in the application module?

    Hi,
    I have some code running in the application module. I want to display error messages in the messages section of the screen if an error happens in my code.
    How could I achieve this?
    I am using JDeveloper 10G
    Thanks

    Muhammed,
    Have you tried throwing a JboException in your AM code?
    John

  • Print a custom Error message in the XML bursting program's log file...

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

  • Trying to download iTunes 11.1 but it keeps giving me an error message saying: The feature you are trying to use is on a network resource that is unavailable.

    Trying to download iTunes 11.1 but it keeps giving me an error message saying:
    The feature you are trying to use is on a network resource that is unavailable.
    Click OK to try again, or enter an alternate path to a folder containing the installation package "iTunes64.msi" in the box below.
    Use Source:

    iTunes.msi
    Perfect, thanks.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • The restore session has stopped working. It tries to load, but then gives an error message that the script is not working and will not actually show the previous tabs I had open.

    I count on using the Firefox restore session feature. But it's stopped working. For the past couple of days, it hasn't worked a single time. (I haven't changed anything on my PC.) It just suddenly stopped working.
    Now it gives me an error message that the script has stopped working. It gives me a couple of options. I'm not sure of the exact wording, but one option is to stop the script and the other is to keep trying. But the keep trying never works.
    I have to stop the script, hence, the list with my previous tabs never comes up.

    Which file is mentioned as the cause of that script error?<br />
    Is that a file with a chrome protocol?

  • I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

    I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

    You need to be very careful which project you open in which version.
    For 2014 make sure its on 2014.1 build 81.

  • I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    Leslie Tanaka
    Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
    Let us go back over that Adobe document regarding troubleshooting damaged projects.
    3. Delete the Application Preferences
    Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
    7. Test to see if individual media files are causing the problem.
    That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
    I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
    I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
    Please review and consider.
    Thank you.
    ATR

  • Error message in the IDOC at item level

    Hi,
    Iam working on IDOC.when idoc failed i get the that idoc error message and displaying in the report at header level.But my requirement is to diplay the error messages at the item level.Is it possible to display the error messages at the item level?For example for IDoc number is 30000045.For this idoc number 7 line items is there like 1000,1001,1002,1003,1004,1005,1006,1007.i want error message line item wise.Kindly suggest me.
    Regards,
    Sujan

    hi sivaprasath,
    write the custme code as per your requirement so that it will do..user exit or badi .
    ~linganna

  • Error message in the  middle left hand of portal

    Hi,
          I am  getting the following  kind of error message in the  middle left hand of portal(Quick Create),
    "<b>Error occurred. Contact the administrator and report the exception ID in the log: 00145EC53868009000000B93001820000004265B5BB688B3</b>.
         Can any body tell me the reason for causing this error message and how to rectify this error message.
         This requirement is urgent
         Thanks in advance.
    Regards,
    Ravi.

    Hello
    Can you see the defaulttrace file for more details?
    Open up Visual Administrator and go to Log Viewer.  Then open up the Defaulttrace file. Generate the same error message and look in the file for more details.
    What do you see?
    And of course.. What did you do to make this error ?
    Best Regards
    Kristoffer Engh

  • HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

    I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

    My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • HT4993 i am trying to install msnbc app from the app store and keep getting an error message.  The app will not install.  What can i do?

    i am trying to install msnbc app from the app store and keep getting an error message.  The app will not install.  What can i do?

    This is asked and answered many times each day.  The forum search bar is on the right side of this page.
    Disable your firewall/security software and try again.

  • When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build"

    When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?

    I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11  itunes v. 9.0   and I just want it to be restored. I need help.  Oh and its an 8 gb ipod touch.

Maybe you are looking for

  • Order confirmation with delivery date in past

    Hello everybody, In the SNC portal, we have a lot of old Purchase order which are not confirmed, and when we try to confirmed them, we have the error below : Order XXXXXXXX, item 00010, schd. line 0000000002: delivery date lies in past My client wish

  • How to set date column to current date by default in form

    Hi, I have some forms in which users need to enter todays date..Is there any way I can set this filed to current date to avoid errors inc ase users dont enter the date. Shravanthi

  • Problem with creating an account

    my internet (safari) working well.but the connection doctor fails when to detect the network.and i canot getting the new mail also.help me

  • Moving picture files when stored via Reference Library in iPhoto

    I have been managing my iPhoto files through the Reference Library since I also access these files through Picasa. I have the same files on my PC and I want to have a single store of my picture files that I share between my PC and my mac. So, it is o

  • Missing Microsoft.SqlServer.ManagedDTS

    Hi I am trying to run a SSIS package first time through vb.net console application. As the first step, i was trying to add the reference for Microsoft.SqlServer.ManagedDTS assembly but it was not in the available assemblies list box in visual studio