Error message in transaction IA05 - crate task list

In transaction IA05 I try to create a new general taks list. When adding a new group counter (12) to my group 264 I get the error message "The planner group counter number has already been allocated". But when I go in display mode (IA07) type in group 264 and hit the Task list overview button I can not find group counter 12 assigned to group 264. Does anyone know what is wrong and how to correct it?
Best regards
Andreas

Dear Andreas
While creating the Task list aginst the exist group system automatically takes the next one counter.
U can as per system. The deleted counter also counted by the system . So u cant take the same no of the counter for new counter.
Even iam not seen the delected task lists counter T codes for checking . But u can check the present task list counter thro Table PLAS.
to know the status
Thenna

Similar Messages

  • Error Message: "Excel cannot complete this task with available resources" when creating pivot table with Excel 2013

    Hi, 
    One of our users encountered this problem with Excel 2013 while creating pivot tables, particularly with large files. We tried to modify Virtual Memory
    of the pc but error still persist. Why does this happen and how can we resolve this? Thanks.
    Another error message encountered by the user, this time when opening large files. The files she tried to open are working fine in 2010. But when opened in 2013, it prompted : "There
    isn't enough memory to complete this action. Try using less data or closing other applications."

    Hi,
    In regarding of the issue, please provide us more information to assist you better.
    Did your user using the Excel 2013 and Excel 2010 with same PC? If not, please let me know the both of the 2 PCs' hardware list/Windows operation system info.
    Did you using Excel 2013 32bit version and Excel 2010 64bit version?
    General speaking, this issue usually occurs with Office 2013 32 bit version. It has a limitation of 2Gb of memory that can be used by its process. And the 64-bit Excel can handle larger workbooks.
    Thus, if your user using 32bit Excel, I recommend try 64bit Excel instead.
    Here is a similar issue, we also could try it:
    http://answers.microsoft.com/en-us/office/forum/office_2007-excel/excel-cannot-complete-the-task-with-available/d31b1822-ebde-4c9b-8d11-e54bb652847d
    If you have any update, please feel free let us know.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Releasing Mass Change Worklist-Error Message No Administrator for this task

    Using transaction AR01 we create a Worklist and assign it to the Substitution Rule.  When we use Transaction AR31 and try to Release the Worklist so that the actual Mass Change can take place, we get the following error message.  "No Administrator for this task".  We've tried a user id with SAPALL and still get this error message.
    Does anyone know what this means and how we can get around this message?

    We have this working in our Test system without having to set up any workflow tasks for Fixed Assets.  I'm wondering if this has to do with the Productive client settings.  We had to make some changes so that we could use transaction OA02 in a Productive client.
    Any suggestions would be greatly appreciated.

  • How can I find error message according to DAC etl task error code?

    Hi all,
    I run the DAetl tasks accroding to the BI APPS installation guide for Financials - Receivables.
    While I found some task result in errors and restart the run can't resolve them.
    I looked at the error tasks and found in the task detail page some index creating step got error. It indicated error code 1542, howerver I can't find any valueable error message.
    Is't a dac error code or informatica error code? where is the document that list all the error code,error message, root cause and solutions?
    Thanks & Regards,
    Scott
    Edited by: Typhoon on Jun 30, 2009 11:21 AM
    Edited by: Typhoon on Jun 30, 2009 11:37 AM

    Hi
    First try to run the workflow of that mapping individually by hardcoding the parameter values........and running through Informatica monitor itself.......later you can revert the changes.......In this way you can findout whether there is some problem in Informatica mapping or DAC configuration....If the problem is at Informatica mapping I think you need to change the session property for target as "Normal" Instead of "Bulk"(because you have indexes being created for the target which would be set record wise.....). Hope this helps
    With Regards
    Ven
    Edited by: user11254581 on Jun 29, 2009 10:58 PM

  • Error in solution manager; no active task list exists in sap change manager

    Hi,
    i have created a correction in Solution manager but when i want to set it in status in development i receive the message below
    No active task list exists in SAP Change Manager
    could you please help me?
    thanks
    C.

    cmarrone wrote:Hi,
    This says taht your ChaRM configuration is not complete. You need to rectify these errors to work in ChaRM.
    >
    > listed below the detail of the errors:
    > Error in background job for program RSGET_SMSY error message No active job found
    1. Please activate the Landscape fetch job for RSGET_SMSY from SPROSolution ManagerBasic Settings-- Schedule Bgd jobs.
    > No RFC connection for system CIA client '000'
    Please maintain a connection from solution manager to the transport domain system . I belive this is CIA.
    > No CTS projects found for project ARC_AM_001
    Recheck the transport configurations.
    Rajeev

  • Firefox won't start, no error message, firefox.exe showing in Task Manager Processes

    Firefox (v3.6.6 on Windows Vista) will not open. When the icon is clicked, the hourglass shows for a few seconds, goes away, and nothing else happens. There are no error messages. 'firefox.exe' shows on the Task Managers Processes tab. I also cannot open Firefox in SafeMode or with the ProfileManager.
    I have tried restarting the computer, uninstalling and reinstalling firefox, deleting my firefox profile. I have tried all of these things multiple times in different orders with no results.
    Please Help!
    == This happened ==
    Every time Firefox opened
    == Yesterday ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; InfoPath.2; MS-RTC LM 8; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MS-RTC LM 8)

    dmcritchie, thank you for your reply!
    Before I received your response, I tried something that seems to have worked. I used Chrome to go to the Firefox website and downloaded Firefox (without uninstalling it first) and went through the installation process again. For some reason, this worked, even though I already had the latest version of Firefox, and I can now open Firefox successfully.
    If it stops working again, I will try your suggestion. In the meantime, thank you much!

  • Error while uploading the general maintenance task list with LSMW

    Hi friends,
    I am uploading the general maintenance task list with the help of Standard Batch/Direct input method in LSMW. I am using the internal number range for task list.
    First task list is getting created properly, but while creating second task list, system is giving the error as "external number range is not assigned for task list and task list with this group ID is already created in the system."
    This is because, on initial screen, system automatically takes the group ID of the task list that is created earlier.
    My question is
    1. How to get rid of the group number that is automatically gets populated in group field of initial screen, while creating the next task list?
    2. Is it possible to assign a common identifier in all structure (Header, Operation etc) for single task list, so that system can differentiate between two task lists?
    In Equipment task list, we can differentiate the task list with equipment id and group counter.
    Please note the following point before replying to my question.
    1. I don't want to upload the general maintenance task list with external number assignment.
    Thanks in advance for early reply.

    I have the same problem....
    Please can somebody help me?

  • How to change java error message in transaction page?

    Hi experts,
    I want to ask, how to change ess critical error message to a user friendly message?
    the message appear because of user exit that we used on the back end.
    so here's the case:
    we use user exit of travel management to check end date of trip maximum is 2week from now.
    the user exit run correctly,
    but, the problem is it(error message) is appear in a new page. (and we can't undo or go back to the transaction page)
    how to make it appear in the transaction page? so the employee could easily change the date without input the transaction again from beginning?
    thanks.

    here is the error
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    , error key: RFC_ERROR_SYSTEM_FAILURE  
    this error come from user exit.
    i made validation for employee that they can't make travel request and expense more than 2 weeks (the end date)

  • Error occurs when I open the tasks list in MS Project Professional 2013 from SharePoint 2013

    Hi,
    I have created a SharePoint 2010 workflow for a tasks list that updates a list item column if the Date Complete <= Today's date & Percentage Complete = 100%
    I used 'Set Field in Current Item' in the workflow & the values are updated in the list for the current item.
    However, when I open the tasks list in MS Project Professional 2013 from SharePoint 2013, then I get a error "We can't write task - taskname to the SharePoint site. This is either because tasks list is in read only mode or because this task has a column
    that requires unique value."
    If I remove the 'Set Field in Current Item' in the workflow, then the error does not occur. However, the 'Set Field in Current Item' in the workflow is required.
    Please provide solution to this issue ASAP. Your reply will be greatly appreciated.
    Thanks in advance

    Hi Jack,
    A shot in the dark here.  I'm not convinced the error is from the workflow.  What is the definition of the list item column in SharePoint?  Have you set the column to requiring a unique vale?  Look at the column definition.

  • Error message processing transaction in F.63

    Hello,
    I have a program which runs transaction F.63, thus upload of mass data which end up as parked document and thereafter posted to FI.
    On a screen, I get this error message "Only GL accounts can be entered on the fast entry screen".
    Even though the required fields and a GL account in filed in, I still get this error message.
    Can anyone give me an insight of what is not going on well.
    Thanks'
    Elvis

    Hi
    Fast entry is only for GL accounts and not for customer or vendor and It is called GL Fast entry
    Check your entry the system might be picking some customer number or vendor number,correct the same and process your session it will be successfull.
    Good Luck
    Hari

  • How to Create Warning or Error message for transaction

    Dear Gurus,
    I understand that we can create a new warning or error message. I would like know how we tie the transaction with these message.
    ex:
    I want to create a warning message in MIGO when i receive goods for PO. How do i create a message a tie the transaction to it.
    Regards,
    Kumara.

    Of course you can add own messages and message classes. But they will not be considered anywhere without proper coding.
    If you want a message to appear in MIGO then you have to find an user exit where you can put your coding that will issue your own messages.

  • Got the Error Message in transaction VL03N when issue the output

    Hi All,
    I got the error Message when i issued the output.
    I selected the output type and error message occurs.
    Error Message"Maintain output NO MATERIAL IS AVAILABLE FOR PRINT ING application completely with VK01.
    Can anybody help me to solve this problem ?
    Regards,
    Luke

    Daer Luke,
    Use T-Code VK01.
    Select usage as B - Output.
    SElect Application as V2 - Shipping & Execute.
    Then select Condition Type & continue. Here select necessary Output Type that you are trying to Print (LD00 in SAP Standard).
    Go in to the Details (by clicking mannifying glass button) screen & Maintain necessary feilds like
    1. Access Sequence (e.g. 0005 - Sales Orgn / Customer),
    2. Put Tick mark in Access to Conditions
    3. Transm. Medium - 1 (Print output)
    4. Partner Functn - SH (Ship to party)
    5. Date/Time - 4 (Send immediately (when saving the application)
    6. PrntParamtr criteria - 5 (Shipping point)
    7. Document type - SDODELNOTE.
    Also check in T-Code NACE whether necessary Printing Problem has been assigned...
    Hope this hleps...
    Thanks,
    Jignesh Mehta

  • Error message in transaction /SAPAPO/SCC_TQ1

    Hi!
    Could you please advise me about nessesary settings for locations.
    I maintain Quota Arrangements in transaction /SAPAPO/SCC_TQ1.
    While creating Quota Arrangement Item an error occurs:
    "The specified partner location PLBP01/ES7032 cannot be quoted"
    Message no. /SAPAPO/OO_TR310
    For the location, which I input in the field 'Partner location'
    So my question is what settings should be made for location in order to make it possible to use it in Quota Arrangement Item?
    Thank you in advance,
    Kind regards,
    Maria Kazakova

    The reason could be as simple as the two locations not being connected by a valid t Lane. while constructing QA, did you use the selection icon to select the partner location ?

  • GETTING ERROR RELATED TO TASK LIST IN ORDER CREATION USING BAPI_ALM_ORDER_M

    hi all ,
    I am using bapi_alm_order_maintain  to create a new work order . i am passing  task list group and task list counter in IT_TASK_list tables . on execution it is showing an error message "  PLEASE PROVIDE THE MANDATORY TASK LIST DURING WORK ORDER CREATION.
    SEEKING YOUR HELP TO REMOVE THIS ERROR.

    hi all ,
    I am using bapi_alm_order_maintain  to create a new work order . i am passing  task list group and task list counter in IT_TASK_list tables . on execution it is showing an error message "  PLEASE PROVIDE THE MANDATORY TASK LIST DURING WORK ORDER CREATION.
    SEEKING YOUR HELP TO REMOVE THIS ERROR.

  • Uploading for Transaction IA05

    Hi,
    Does anybody have any idea what are the ways to upload data for transaction IA05 - General Task List. I understand there are LSMW direct inputs 470 and 490, but both of them lead to the same transaction IA01 i.e Equipment Task List.
    I have created the BDC for this transaction but there is one problem with that the component data we want should be coming form BOM and while we do the transaction the component that getting selected are not from the BOM but of different category.
    Can any please guide on this?
    Regards
    Saurabh

    This requirement is like one-off. Would like to share with the community how it was eventually done as there is no standard functionality like BAPI or even BDC won't work.
    This is done by updating the PLMZ table by calling the FM. Stringent validations will have to be performed before calling this FM as there can be a case where there is no Task list is created and there is a entry in PLMZ table which is for Components.
    This function is used to record the changes done in IA06.
          CALL FUNCTION 'CHANGEDOCUMENT_OPEN'
            EXPORTING
              objectclass             = v_objectclass
              objectid                = v_objectid
              planned_change_number   = space
              planned_or_real_changes = space
            EXCEPTIONS
              sequence_invalid        = 1
              OTHERS                  = 2.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
          v_count = text-075.
    This is the main function module that will update the PLMZ table with data from it_plmzf*
          CALL FUNCTION 'CM_VB_PLMZ_POST'
            EXPORTING
             aeb_kz    = c_x
             count_max = v_count
            TABLES
              planmz    = it_plmzf
              plmz_old  = it_pplmz.
    This function module is used to close the record log opened by 'CHANGEDOCUMENT_OPEN'.
          CALL FUNCTION 'CHANGEDOCUMENT_CLOSE'
            EXPORTING
              date_of_change          = sy-datum
              objectclass             = v_objectclass
              objectid                = v_objectid
              tcode                   = 'IA06'
              time_of_change          = sy-uzeit
              username                = sy-uname
              object_change_indicator = c_u
              planned_or_real_changes = space
              no_change_pointers      = space
            EXCEPTIONS
              header_insert_failed    = 1
              no_position_inserted    = 2
              object_invalid          = 3
              open_missing            = 4
              position_insert_failed  = 5
              OTHERS                  = 6.
    Call change document modules to record changes.
    This will create the components by passing the task list number and operations.
    Saurabh.
    Edited by: Saurabh Maynil on Dec 29, 2009 8:00 PM
    Edited by: Saurabh Maynil on Dec 29, 2009 8:02 PM

Maybe you are looking for

  • I've had to change my email address so I registered the new one with apple, but how do I transfer the credit on my old account?

    I registered my itunes account under my email address but when I changed it I cant seem to transfer my apps across or credit. To make matters worse my new computer states there is a new iphone update out and to install it will erase all apps and musi

  • LOV works fine when run from JDEV

    Hi OAF Gurus, I have an issue with one of the LOV population. It is an external LOV and I have created it as a seperate region and it works fine when I run from the Jdeveloper . When I deploy it in the server,it throwing me an error with a OAF except

  • Can fljs launch a shell script?

    I'm stuck on trying to figure out a long process (as flash does not allow to publish from the terminal (hint, hint adobeDev people). How can I launch a shell script after a *.fljs has published the a swf file, so it can push the swf file further down

  • Hyperion Interactive reporting performance issue.

    Hi, We created a report in Hyperion Interactive reporting using Hyperion Essbase as database connection file . Report performance was good in Interactive reporting Studio we don't have any problem in studio. when we open the the report in Hyperion Wo

  • How to setup the jsp service

    Hi all, After I setup teh weblogic and write some jsp, I cannot call the jsp up from my URL thur a NES. My configuration is Web-server NES 3.6.3 WebLogic App Server 4.5.2 (URL http://hostname:81/servlet/* will proxy-forward the request to weblogic 4.