Error message Incomplete Book

I have completed a book but am unable to buy it.  An error message appears. There are no frames that do not contain photos.  Help!

there are  --  probabluy a pae background requiring a photo hidden behind a layout with a full page photos placed - all pages must have either a photo or be a color - any "gray" backgrounds require a photo  --  look thorough your book carefully - there are one or more missing photos
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Similar Messages

  • When I click on purchase book, i get message "Incomplete Book. Your book seems to have frames on one or more pages that do not contain photos." I have checked the page layouts several times and no missing seem to be missing.

    when I click on purchase book, i get message "Incomplete Book. Your book seems to have frames on one or more pages that do not contain photos." I have checked the page layouts several times and no missing seem to be missing. Any suggestion? page layouts and number of photos are consistent. several pages are identified as custom, as a result of captions added to several photos. I'm using a macpro and iphoto11.

    There is one or more missing photo - typically a page background requiring a photo that is hidden behind a layout with photos in it - look through every page for that - any page tha thas a grey background rather than color is a problem - and it ccan be behind a full page photo so you have to check the page background rather than just look at the page
    LN

  • IPad won't open iBooks - error message that book isn't formatted correctly, iPad is fully updated and I've tried deleting and reloading iBooks - only thing that has happened between when it used to work and now doesn't is that I took the iPad to singapore

    iPad used to open iBooks purchased off iTunes no problems but since I took my iPad overseas on holiday it no longer opens iBooks - they appear to download ok but when I tap to open the book I get an error message saying the book isn't formatted correctly or is in a format that iBooks doesn't recognise. I have tried
    - deleting and reloading iBooks
    - making all updates have been done
    - turning on and off airplane mode
    And still have the problems
    Did ask iTunes help but so far no joy - appreciate help please

    Ok, I got the 1.3/1.4 thing straight now. There was a java.exe in System32 that I now see the PATH was calling first.
    And in the TextPad version of the problem, I was curious -- I don't remember setting the specification of the executable called by the Run Tool button, but I must have at some point. I uninstalled the program and reinstalled it and it created a default button that apparently points to what it's supposed to point to, since it now works and runs my program OK.
    Still, I wonder how it can be that explicitly directing the button to C:\j2sdk1.4.0\bin\java.exe makes TextPad's Command Results Window say "NoClassDefFoundError"
    I'm up and working now, but if anyone has a clue I can learn from on the TextPad issue, thanks

  • Custom error messages when booking traing in SAP LSO

    In SAP LSO i implemented the BADI IF_EX_LSO_CHECK_BOOKING~CHECK_BOOKING in the code i throw error message in the object ct_message_tab  of type DCMESSAGE.
    When the error is presented within the portal two things are not the way i want it.
    1. The error message can be up to 50 characters per message so i need to append more line to ct_message_tab, each line is presented with the read error symbol prior to the line. i want multiple lines with only one error symbol
    2.  I:001:000 Voor deze training hebben we aanvullende persoonsgegevens van je nodig.
    I:002:000 Geef hiervoor je akkoord op de disclaimer bij "Informatie" in dit leerportaal.
    I:003:000 Heb je vragen hierover? De cursusaanbieder beantwoordt ze graag.
    the message are presented with the message number and message id, I only want to display the the msgv1 to msgv3.
    Hope anyone got a clue.
    Finaly the next problem, when pre-booking a course only a SAP pre defined error is shown, so the custom ct_message_tab is not visible on this screen.
    I use following code three times because of maximum length of 50 characters per message line
          IF sy-subrc EQ 0 AND lv_disclaimer IS INITIAL.
            lw_message_tab-msgid = '001'.
            lw_message_tab-msgty = 'E'.
         lw_message_tab-msgno = '1'.
            lw_message_tab-msgv1 = 'Voor deze training hebben we aanvullende'.
            lw_message_tab-msgv2 = 'persoonsgegevens  van je nodig.'.
            lw_message_tab-msgv3 = ''.
            lw_message_tab-msgv4 = ''.
            APPEND lw_message_tab  TO ct_message_tab.
            lw_message_tab-msgid = '002'.
            lw_message_tab-msgty = 'E'.
         lw_message_tab-msgno = '1'.
            lw_message_tab-msgv1 = 'Geef hiervoor je akkoord op de disclaimer'.
            lw_message_tab-msgv2 = 'bij "Informatie" in dit leerportaal.'.
            lw_message_tab-msgv3 = ''.
            lw_message_tab-msgv4 = ''.
            APPEND lw_message_tab  TO ct_message_tab.
    Edited by: Richard van Veen on Apr 21, 2010 9:13 AM

    Hi,
    it is urgent can any one help on this.
    Thanks,
    Sridhar Reddy.G

  • Connection object - error message : Incomplete address; enter country

    Dear experts,
    I want to to create a Connection Object in the Web IC.
    I enter the address information (with the country) then save.
    The following error message is displayed : "Incomplete address; enter country"
    Has anybody already encountered this problem?
    Do you have any idea how we could solve this?
    Thanks a lot for your help.
    Regards,
    Pascale

    Hi,
    Have you resolved it?
    Regards,
    Vamshi.

  • Error message uploading book through iTunes Producer

    I'm uploading my ebook to iTunes Producer and when it is verifying assets with the iTunes store, I get the following message: Error: Internal error: java.net.MalformedURLException: unknown protocol: bundle schema/20/rng/opf.rng" at Book (MZItmspBookPackage).
    I've seen others with this problem, but not apparent resolution.
    Please advise.
    Jon
    PS. I'm using iTunes Producer 2.6.

    I think the same error is being discussed here. It's related to the version of Java you have installed on OS X.
    https://discussions.apple.com/thread/3862385?tstart=0

  • Trying to "buy book" in Iphoto...getting error message

    I am trying to buy an Iphoto book that I have created and I am getting the following error message:
    +Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book.+
    I have created and successfully purchased quite a few different books in the past, without a hitch. I have gone through each page and can not find the problem, has anyone else seen this before?? Or perhaps is there somewhere that will tell me what page(s) the problem could be on?
    Thank you

    kmth
    welcome to the Apple user discussion forums
    yes - other have seen this - about 1 out of 5 of the posts in the photo services forum - http://discussions.apple.com/forum.jspa?forumID=1197 - relate to this and the answer is very simple - you have a missing photo - the most likely place is on a photo background page -the pages with a gray background or with a gray palm tree - and it can be hidden behind a full page photo - see my write up here for a longer description on how to solve this
    LN
    Message was edited by: LarryHN

  • Error Message When Trying to Burn Pics to a CD

    I'm trying to burn pictures to a DVD. I have the ones I want highlighted, I then click "Burn", and it gives me the following error message:
    "Incomplete Disc Name
    Please enter a name for the disc"
    A name automatically populates in the "Name" field ... I've left the name as it is, I've tried to change it, I've taken numbers out, I've taken any special characters out, and I've even tried to leave it blank. Still get the error message.
    Any ideas how I can fix this? Thanks for your help!

    Try the basic fix: close iPhoto, delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and see if that helps.

  • Cannot Purchase Photobook -- Error Message

    I see that there is a similar post below. I posted to that thread but in case it's not seen I wanted to post it again.
    My error message:
    Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book.
    I checked all layouts and pictures are selected for each frame. In the last thread Larry mentioned something about black and white pictures? Can I not include them in my book? I have one page with a full page picture -- I selected a beige background for that one. Does that make a difference?
    Help!
    Mena
    [email protected]

    All photos must have the sRGB color profile - a B&W photo can have sRGB or a grayscale profile - but the grayscale profile will not work for iPhoto or iPhoto books
    The most likely cause of your problem is a missing photo - either a page with a gray background (which requires a photo) or a full page photo with a gray background underneath the full page photo - CLick here for an expanded write up on missing photos
    LN

  • Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

    I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

    Hi Leonie,
    Thanks for your reply.
    Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are  around 1-3 mb each and  72 ppi. I think  I will now scan them properly with a scanner to 300dpi anyway to improve quality.
    Apple  talks about image files not being too big for uploading but gives no sizing of what too big is?
    Error message
    1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
    2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
    3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

  • When I try to open iPhoto, I get an error message that says it can't open the application because it may be damaged or incomplete.

    When I try to open iPhoto, I get an error message that says it can't open the application because it may be damaged or incomplete.

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    Happy New Year

  • TS1424 Purchased 3 books from store 2 are in complete with error messages & 1 not downloaded at all  don't know how to re download items

    I purchased 3 books from  store 2 jhave incomplete  downloaded with most chapters with error messages 1 has not downloaded at all
    I don't know how to repet the download

    Delete the damaged items, then locate in the store and redownload.
    tt2

  • Iphoto book error message

    I'm trying to buy and Iphoto book I created  but it keeps giving error code of Incomplete book.  "Your book seems to have grames on one or more pages that do not contain photos. "
    All the pages are full with photos or text pages.
    How can I find out the page that is the problem???

    If you have any full page photos check the layout to make sure it's not this layout:
    With that layout if you add just one photo it will be missing the second photo and give you that warning message.
    OT

  • Incomplete Book error

    When trying to 'Buy Book' in iPhoto '09, I keep getting the error:
    *Incomplete Book*
    Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book.
    All frames do in fact have images - however from what I read this seems to be a page background issue.
    Based on the suggestions in the forum, I have re-selected the layout of Blank, then background image and dragged the image on to the background. It all appears onscreen perfectly.
    No matter what I do, it keeps giving me the same error message.
    Does anyone have any ideas?

    Kat
    Welcome to the Apple user to user assistance forums
    Yours s the first post of this I've seen in iPhoto '09 - it use dot be that the most common problem was a background photo behind a full [age photo making it very hard to fine - I'm sure that you do have a missing photo and since it is not obvious it probably is a background photo behind a full page photo
    click here for a link to the iPhoto '08 discussion I did on this - iPhoto '09 is a bit different in that there is no longer a grey palm tree -but the concept is the same - see if it helps you.
    LN

  • 7.1.3 "Incomplete Book" message

    Just updated to iphoto 7 and I'm trying to order a book I created. Keep getting a message that says "Incomplete Book" and tells me some frames are empty and that I need to delete them or choose a new layout for the page. All frames are complete with photos so I'm not sure what the problem is. Any ideas or help?

    Jay T in DC
    Welcome to the Apple user discussion forums
    As to your iPhoto '08 problem - so far as I know the error you are getting is ALWAYS caused by a missing photo - most often either a background photo (any page that has a gray background or gray palm tree requires a photo for the background) or a full page photo with a background photo behind it (the hardest one to find) Click here for a more complete discussion on this. Just assume that you do in fact have a missing photo and you will have to find it.
    LN
    Message was edited by: LarryHN

Maybe you are looking for

  • BI-IP with WAD using enhanced SAVE_DATA command. It is possible?

    Hi, I have a BI-IP Planning application based on WAD and deployed in WEB. My customer is asking to add some enhanced functionality to the SAVE button (SAVE_DATA command in WAD). The basic idea here is to extend forward for a simple validation procedu

  • Please help: Get IP address of a remote device (wifi kit) from DHCP router

    Hi ppl, I am about to get the IP address for the wifi kit which is connected to the same router with my PC. I need to control my wifi kit through TCP client communication, but DHCP tends to assign new IP address to my wifi kit when connected to route

  • Printer determination for printing Purchase Order

    Hi, When I create Purchse Order I want to print 2 documents - Purchase order for the vendor and a check list for the stockkeeper. I created 2 different message types. When PO is for different Plants, I want to print this check list on different print

  • N73 & PC Suite - no photo upload & not fully synch...

    Hi, I'm running Windows XP and the latest PC Suite (updated yesterday). Regardless of the "both way" settings, when synchronising data only goes from the PC to the phone, not the otherway. I've tried the fix mentioned earlier (create new settings) bu

  • How to select everything right from playhead (like in fcp7)

    You know, this handy old useful tool that allowed you to either select trackwise or for all tracks everything that was right or left the cursor, to -you name it- select everything, move it to the right, and then insert something in the gap? Everytime