Error Message: Install Black Cartridge on LaserJet M1522nf

Hello:
I have a LaserJet M1522nf and am getting an error message stating "Install black cartridge", even though I have installed a new cartridge. I have tried 3 different new cartridges and still get the same error.
I am currently using this printer on a Windows Vista Home Basic computer.
The current cartridge I am trying is a LD Products CB436A.
This has been going on for months and we're using it as part of our office system. Each day this gets at me and I'm about to buy an alternate brand printer if I can't get this solved.
I greatly appreciate your help!
This question was solved.
View Solution.

I had this problem too - Here's what I found on the HP trouble-shooting/error message site. The bold italics I added, that was my problem:
"Install black cartridge" No cartridge installed with door closed.
If the paper tray has been overfilled, it can lift the toner cartridge up from its seated position, resulting in the cartridge not being detected by the MFP.
Remove the toner cartridge.
Remove all paper from the bottom tray.
Check for any paper jam and, if found, clear it.
Power cycle the printer (turn it off and then back on).
Reinstall the toner cartridge, being careful to make sure it is seated properly in the MFP.
Reload paper in the bottom tray; be careful not to overfill the tray.

Similar Messages

Install black cartridge

My HP Laserjet M1522n MFP tipped over today. Since then, the control panel has been flashing an error light and displaying the message, "Install Black Cartridge." I have never installed a black cartridge - this is NOT a color printer. The toner cartridge does not need to be replaced. H E L !!

Good day! This means the printer unable to detect there is toner inserted. you might need to try below steps: 1. Reinsert/reseat the toner.2. if error persist, take out the toner and open all trys inspect is there any foreign object like paper debris or paper clips...3. clean the smart chip (gold color)\4. is there any spare toner to try? this steps will helps to narrow down toner/printer issue.

Install Black Cartridge error message on new cartridge

I have a brand new HP M127FW laserjet pro printer. I purchased it Dec 2014 and just opened it today in anticpation of my old HP printer dying and it finally did. I also purchased a HP laserjet model 83A print cartridge at the same time and just opened it today form the air tight sealed package.   I tried to test it as instructed with the existing cartridge that came with the printer and it jammed. I removed the paper and then tried again and it said install black cartridge. I thought perhaps having sat in the printer for that length of time it had dried out, although I though tthe lazser jet cartidges are powder and don't dry out. Figuring like ink jets cartidges the ones that come with the printer are only partially filled I decided to try my brand new one. I am having the same error message. On the catridge box it indicates what looks lie a date printed as 201409016. This is extremely frustrating considering I purchased an HP cartridge not a reseller and payed over $60 for it. Can anyone help with a possible solution. I can't call HP chat support at least for free since it s pay the free 90 days post purchase.

Hi ,  I see you have been troubleshooting an issue with your new LaserJet Pro MFP M127, and I may have found some items you can check.
This issue is usually caused by some sort of packing materials that may be hiding on you. I would double check Setting Up the Printer Hardware for HP LaserJet Pro MFP M127fw to make sure it's not a piece of cardboard inside the printer. The next thing that may cause this would be if you forgot to remove the orange tabs on the toner cartridge. If you take a look at Replacing the Toner Cartridge, it shows what needs to be removed from the toner before installing it inside the printer. There is a whole setup video about Unboxing and Setup of the LaserJet Pro MFP M127 you can watch as well. If the issue persists, you might still have options covered under the HP LaserJet Print Cartridges and Imaging Drums Limited Warranty Statement - I would still try to Contact HP Support to see if there is anything they can do. Fill in the model number and the form to receive a case number for expedited assistance.  Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks,

Install black cartridge error

Please help! I have a HP 1536 laserjet. I brought a new toner and installed it. I keep getting a "Change black cartridge or clear jam open clos door alert.
Is there anyone who has faced the same issue?

Hi @Printer1536,
Welcome to the HP Forums!
I noticed that you are getting the change black cartridge or clear jam open close door alert error with your HP LaserJet P1102w. I am happy to help you!
Please take a look through this guide. The Attention Light Blinks and an 'Install black cartridge' Message Displays on the Control Panel.
If that does not resolve your issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Laserjet pro 400 mfp m425dn says install black cartridge

I have a laserjet pro 400 mfp m425dn that keeps giving "install black cartridge" message. I mistakenly thought it was calling for a new cartridge so I ordered one and installed it. It still gives the message. I could not find anything out of place. I did notice that the left side of the cartridge is slightly raised. (may be my imagination because it is very slight.) Any suggestions???

Hello Sardonnic_Pizza,
I understand your concerns. Unfortunately, for this type of printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

'Install black cartridge' message persists

I have a Laserjet M1212nf MFP printer. A few days ago the ink levels were fine, but today I got the 'Install black cartridge'. I bought a new cartridge, but the message persists. I have tried taking it out a few times, and I have powered down and restarted. It makes no difference.
Any idea how to proceed?
This question was solved.
View Solution.

Sorry that you are having an issue with the black cartridge not reading correctly. You can try to clean the cartridge and the print head.
Sometimes the print head does not read the contacts correctly, and needs servicing.
Here is a link for this issue. I hope this helps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02476541&tmp_task=solveCategory&cc=us&dlc=&lc=e...
Let me know what happens.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Officejet 7310 Error Message "Remove & check cartridge on right"

After installing a new HP cartridge # 96 on my Officejet 7310 the Error Message "Remove & check cartridge on right" persists.
Am using OS 10.7.4. Tried everything. Any thoughts would be greatly appreciated.

Hi ike69,
There are several causes to this issue, please see the following for an explanation and troubleshooting of the possible causes:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Why does my printer shwos install black cartridge. already loaded.

Why does my hp Laser Jet M1213nf MFP printer display showing as INSTALL BLACK CARTRIDGE. It is already loaded. just accuring this problem. I have turned off and turned on 2 or more times but it not rectify.. can you please solve dis problem..
This question was solved.
View Solution.

It is possible that the toner cartridge still has some packaging on it or that it isn't fully secured in place. I would try completely removing the toner cartridge from the printer and taking a look at the steps in the document found here. The document has steps to troubleshoot when an 'Install Black Cartridge' error is present on the display.
Let me know how it goes.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How do i get past the "do not have sufficient privileges" error message installing flashplayer?

how do i get past the "do not have sufficient privileges" error message installing flashplayer? i've googled the problem and seen the other solutions and for some reason cannot get any of them to work for me.

I've recommended several things here in the forums and like you, I've seen zero success.
Run as Administrator = no luck.
Take ownership of the c drive = no luck.
Create a new (admin) account = no success.
I've even seen one poster who reformatted and reinstalled Window 7, and no luck.
Frankly, I'm at a total loss.

Reinstalling Design Premium 5.5 on a Mac - error message "Install" can't be opened. You should eject the disk image.

Trying to reinstall Design Premium 5.5 on a Mac OSX 10.7.5 - once downloaded to my computer it will not install due to error message "Install" can't be opened. You should eject the disk image.
Thanks

no, redownload using a different browser from prodesigntools.com
if you follow all 7 steps you can directly download a trial here: Download Adobe CS5.5 Trials: Direct Links (no Assistant / Manager) | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

I need help re-installing itunes. I get the error message: Install failed run preupgrade for Apple Mobile Device Support. Any solutions?

I've been trying to upgrade to/install Itunes 10. When trying to do so, I get the error message: Install failed run preupgrade for Apple Mobile Device Support.
Per what I saw as a response to someone else who had a similar issue, I thought a fix might be to uninstall my existing Itunes, then try to re-install the Itunes 10. I tried that. However, I still get the same error message. Now, I have no Itunes.
I tried to email Apple, and they have not replied.
Anyone offer any solutions?

me too did you get any help?

I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again. What should I do?

I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again. What should I do?

JPPI-
Did you try it with the iTunes your Mac already has?
Try running Software Update in your System Preferences. That should bring your computer up to the latest software available for 10.4. You would end up with an older version of iTunes, but that may be good enough to activate your iPad.
Fred

Hp laserjet m1522nf "install black cartridge"

My fax/printer (HP LaserJet M1522nf) is still insisting that it needs a black ink cartridge. I JUST INSTALLED A BRAND NEW CARTRIDGE AND IT STILL SAYS TO INSTALL A BLACK INK CARTRIDGE AND WON'T PRINT A THING. I'm very frustrated, I was behind in my work to begin with. I have reset the machine multiple times. Pulled the cartridge out and stuck it back in. Help.
Joey
This question was solved.
View Solution.

Have you tried removing all the paper from the bottom tray and then installing the cartridge?
Checked for any paper jams?
Re-install the old cartridge?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

"Install black cartridge" message.

Installed new black cartridge in my Laserjet Professional M1210 but can't get rid of the message or start printing. what do I do?
This question was solved.
View Solution.

Hi Stumpedagain,
Please take a look at this suport guide for the error message. Maybe there is a packing material inside your printer.
*I am an HP employee*
** Please click "Accept as Solution" if it solved your problem, so others can find it **
***Give Kudos to say "Thanks" by clicking on the thumbs up button under my name***

Installing black cartridge in HP Photosmart C4280

I've tried to install 3 new black cartridges. Each time I get an error message that says, "Print Cartridge Incorrectly Installed." When I replace the empty cartridge, that message disappears. I know I am installing the new ones correctly! Please HELP.

Hello msellhorn,
Welcome to the HP Forums.
I understand that you've just replaced that black cartridge for your Officejet 8500a, and are unable to print in black still. I will do my best to help you with this issue.
I have a document for you to follow: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages. Please attempt the steps listed to see if it will resolve your issue. If you have further difficulties or questions feel free to respond with them.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Error Message: Install Black Cartridge on LaserJet M1522nf

Similar Messages

Maybe you are looking for