Error message installing BI Statistics. Any help?

Hi,
Ok, I am following the link: http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/content.htm
to install BI Statistics (0BWTCT_STA).
In rsa1, Bi Content, InfoArea, I collected 0BWTCT_STA to the right pane, and followed the Procedure in the link by choosing “grouping function for necessary objects only”
the next step is to install. (Procedure 1 b. in the link).
(The instruction does not indicate which objects to “check” for installation or not, so I left the default check marks)
But I got the message below.
I cancelled on seeing this message 2 times, but on the third attempt, I did not get the message and there was a prompt for transport request.
1. If I continue now, with a transport request, will it install?
2. Why did it stop giving the error?
3. Can this installation cause any problem in the environment?
4. What is the significance of this message I got?
Message and details----
Make repairs in foreign namespaces only if they are urgent                                                                               
Message no. TR852                                                                               
Diagnosis                                                                               
The object being edited is in a namespace reserved for objects belonging
     to SAP or another software producer.                                   
     This system is supplied with this namespace.                                                                               
System Response                                                                               
The function continues.                                                                               
Procedure                                                                               
Only perform urgent repairs and only after consulting with or on       
     instruction from the owner of the namespace.

Hello Amanda,
Please see this OSS Note 431126 -  Activating characteristics that are document attributes.
Thanks
[Chandran|http://chandranonline.blogspot.com/]

Similar Messages

  • TS1424 Unable to install Itunes, it downloads fine, but then error message pops up. Any help?

    Anyone who can help?  I had itunes on my computer since 2009 with no problmes, there was an update yesterday am, tried to update, wouldn't allow it to happen, I logged off, back on, tried a couple of times with no luck.  I then uninstalled so i could reinstall,  now it downloads but will not allow the install, an error message keep popping up.  Tried to update other things too, nothing seems to be working...... Called Apple for phone help but they wanted me to pay 20 bucks, sorry no..  thanks anyone who can help.

    That's a bit odd. Normally it's an error you get if iTunes has been installed ... you just can't open the Store.
    Are you getting that after launching iTunes and trying to go to the Store? If so, have you checked the date and time on the PC as per the following document?
    iTunes: About the "A secure network connection could not be established" alert

  • TS3274 My IPAD keeps restarting a few minutes after booting up. It just keeps doing it again, and again, with no error messages. Grateful for any help!

    My IPAD keeps restarting a few minutes after booting up. It keeps doing it again and again, after the same period of time. Grateful for any help!

    If the above doesn't work, force iPad into Recovery Mode.
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • I need help re-installing itunes.  I get the error message: Install failed run preupgrade for Apple Mobile Device Support.  Any solutions?

    I've been trying to upgrade to/install Itunes 10.  When trying to do so, I get the error message: Install failed run preupgrade for Apple Mobile Device Support.
    Per what I saw as a response to someone else who had a similar issue, I thought a fix might be to uninstall my existing Itunes, then try to re-install the Itunes 10.  I tried that.  However, I still get the same error message.  Now, I have no Itunes.   
    I tried to email Apple, and they have not replied.
    Anyone offer any solutions? 

    me too did you get any help?

  • I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete.  Help!!!!

    I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete.  Help!!!!

    It's best to start with figuring out your eMac model and OS in order to answer the question. This article will help you determine your model:
    How to locate the serial number and identify your model
    And to get the version of Mac OS that's installed:
    From the Apple Menu at the left end of your menu bar, select "About this Mac..."
    In the resulting Window, you can see the Mac OS version just under the big "Mac OS X":
    If the eMac is older and you have never upgraded the system software, it's possible that your OS version is too old to run the current iTunes. The current version requires OS 10.5 (Leopard)or higher, which is a pay-for system upgrade.

  • I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318).  Any help appreciated!

    When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318).  Any help appreciated!

    Hey there Dan256162,
    I understand that you are receiving a specific error code when attempting to connect to the iTunes Store, error 0x80090318. I have an article for you that references this code and links you to another article for troubleshooting to address this issue. Here is the article that references the error code:
    iTunes: Possible iTunes Store errors - Apple Support
    http://support.apple.com/en-us/HT203174
    And here is the linked troubleshooting article that will help you resolve the issue:
    Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
    http://support.apple.com/en-us/TS4123
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • HT1925 I can't uninstalled itunes.  I get the message  (itunes64.msi missing)  any help out there??

    I can't uninstalled itunes.  I get the message  (itunes64.msi missing)  any help out there??

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • PsCS6  won't open. Error Message 213:19. Need Help.

    PsCS6  won't open. Error Message 213:19. Need Help.

    HI jacksonthomas,
    Were you able to use PS CS6?
    If not, please try the solutions on the following page: http://helpx.adobe.com/photoshop-elements/kb/licensing-problem.html
    Let us know if you need any further help.
    -Pragya

  • My computer recently froze whilst updating Itunes, and has subsequently removed Itunes from my computer. When i have tried to reinstall the programme, i get the following error message "Invalid Drive:G:\" any ideas?

    My computer recently froze whilst updating Itunes, and has subsequently removed Itunes from my computer. When i have tried to reinstall the programme, i get the following error message "Invalid Drive:G:\" any ideas?

    Try the following user tip:
    "Invalid drive X:\" install errors

  • How do i get past the "do not have sufficient privileges" error message installing flashplayer?

    how do i get past the "do not have sufficient privileges" error message installing flashplayer? i've googled the problem and seen the other solutions and for some reason cannot get any of them to work for me.

    I've recommended several things here in the forums and like you, I've seen zero success.
    Run as Administrator = no luck.
    Take ownership of the c drive = no luck.
    Create a new (admin) account = no success.
    I've even seen one poster who reformatted and reinstalled Window 7, and no luck.
    Frankly, I'm at a total loss.

  • TS3988 I get a "Connection Error - iCloud encountered an error while trying to connect to the server" message; I have been getting this error message for months, on any device I try to login with.

    I get a "Connection Error - iCloud encountered an error while trying to connect to the server" message; I have been getting this error message for months, on any device I try to login with.

    Hi
    I am sorry can't help you because I have same problem when login to icloude.com and try insert to Contacts!
    Many times happen.
    what is issues ?

  • Missing saplicense.exe. NSP does not run anymore. No install CD.  Any help?

    Hi, I'm very new in this SAP world. I downloaded the NSP to play with it a little bit but I didn't realize when my license expired. Now I cannot login in the system and the only available instructions I've found specifies to use a saplicene.exe program that does not exist in any directory. I don't have the install CD. Any help?
    please respond to my email: [email protected]
    Regards,
    Herman

    I found out how to do it:
    1.-I used SAP* / minisap to log in
    2.-Click on install button (this shows the HWID key!!!)
    3.-Go to http://www.sap.com/minisap
    4.-Fill all information (leave the "System number" field blank)
    5.-Check on "I agree" (for the agreement)
    6.-Click on submit

  • Getting error message in Business Partner search help

    Hi Experts,
    User is getting an error message while clicking the Search help for business Partner in all the transactions (FPL9, EEDM11, etc.).
    Only few users are facing this issue. We have compared the roles of the affected users and unaffected users and the roles are same. What will be the reason for few users getting the error?
    Thanks  & Regards,
    Dipin

    I'm not familiar with EEDM11, but FPL9 has parameter ids that can be set at the user level.  Look at
    System/User Profile/Own Data, Parameters tab between your two groups of users.  Also consider checking the settings in  Help/Settings, F4 Help tab.
    Lastly, you might try dropping debug on the error popup and see where it is being triggered from.  Maybe the answer is there.
    Regards,
    K--

  • I deleted my microsoft office:mac 2011 word from my toolbar. I have Mac OS X version 10.6.8.  I tried to reinstall but it won't work. I get an error message each time. Please help!!!!!!!!!!!!!!

    I deleted my microsoft office:mac 2011 word from my toolbar. I have Mac OS X version 10.6.8.  I tried to reinstall but it won't work. This has never happened before.  I get an error message each time. Please help!!!!!!!!!!!!!!  I don't have time machine. 

    By Toolbar, do you mean the Dock?  The Translucent bar normally at the bottom of the screen, but sometimes at the right or left side?
    If that's what you mean, the Dock is merely a shortcut to what is already inside the Applications folder's Microsoft Office 2011 folder.  If you have Word inside your Microsoft Office 2011 folder, you can drag it back to the Dock.
    If you deleted the Microsoft Office folder, or it is empty, you'll have to reinstall it. 
    If you don't have your registration code, you'll have to call Microsoft for a new one.

Maybe you are looking for