Error message is not in correct format in portal
Hi,
I am passing message into i_messages table in User Exit CATS0003 .
Syntax Code:
I_MESSAGES-MSGTY = 'E'.
I_MESSAGES-MSGID = Message class name
I_MESSAGES-MSGNO = Message no.
I_MESSAGES-MSGV1 = Message Text.
Append I_MESSAGES.
But the error message populating from Exit is not being displayed in correct format in Portal.
Message coming is like this:
:/kgo/tm:032 Engagement code is not open during time entry.
But the correct format should be:
Engagement code is not open during time entry.
Thanks in Advance.
Madhu
Edited by: Madhusmita Acharya on Jun 3, 2009 2:13 PM
Hi Max,
Yes message number of the message class is existing.
In fact Message is coming in portal but extra message class name (/kgo/tm)and message no.(032) is coming like below
I dont need these Message class & Message no. in message as below
/kgo/tm:032 Engagement code is not open during time entry.
I need message like below one.
Engagement code is not open during time entry.
Similar Messages
-
I have uninstalled and installed iTunes several times since it stopped working about a month ago. I get the following error message when I try and open it...
iTunes not installed correctly. Reinstall iTunes. Error 7 (Windows error 998)
Any suggestions on how to proceed?Hi there. I am getting a similar message today. Here is the message I get; if you could help me that would be great:
the procedure entry point kCMPyteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
I've read other posts talking about QTXX.dll problems but this one seems different. Any suggestions b noir? Thanks! -
Error message severity not translated correct when locale is changed
We have a shell page displaying different task flows within a dynamic region. The shell page f:view tag has locale="#{LocaleManager.currentLocale}" to allow programmatic change of locale. Most of the flows uses the locale from the browser request (e.g. Danish) but some pages has fixed locale (en_US) and will always be rendered with this locale (don't ask me why. It's a requirement). For those fixed locale pages, the expression #{LocaleManager.currentLocale} always returns "en_US". It works nice, but we have a strange problem with the translation of error messages displayed by validators/converters. E.g. if a character is entered in a number field, the user will see the usual popup error message like "*Error:* The value is not a number". The message part of the error message is translated but the severity message prefix ("Error:" in the example), seems to be translated and cached once per session. If the error message popup has been displayed once in a different locale, then after change of locale, the severity message prefix continues to use the translation from the first display. The message part of the message is translated perfectly.
Let me give an example:
1) User enters da_DK page and enters a invalid number. Error message displayed: "*Fejl:* Værdien er ikke et tal"
2) User enters en_US page and enters a invalid number. Error message displayed: "*Fejl:* The value is not a number"
If the examples is reversed, then the error messages will be:
2) "*Error:* The value is not a number"
1) "*Error:* Værdien er ikke et tal"
Do anyone know how to clear this translated severity message prefix, when locale is changed? Or is there a better way to overcome this issue?
We're using JDeveloper and ADF 11.1.2.2 and are able to reproduce the issue on the embedded weblogic.Hi again
ok I added another locale that ships with flash builder, and encoutered the same problem
whenever I change the locale, the error tooltips are gone
I was even able to fix both new locales by assigning the the validators custom error messages using resourceManager.getString() like i assign a value to all other UI strings in the application
the default locale which is specified in the project compiler's parameters is en_US
and my final question to you is:
is there a best practice regarding localizing & managing the error massages Flex SDK uses?
what is the internal path to the resource bundles that flex uses to display errors?
it seems like it makes more sense to copy and edit an existing list of errors, rather then blow up the application code...
can you please share your view on the matter
thank you for your help
Yariv -
why won't itunes download on my pc. I get an error message saying not a correct 64 bit download???
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.
The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
The platforms don't matter, but you still need file transfer that doesn't corrupt files... -
Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file. HELP!
If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
Gene -
Trying to install iTunes on my XP machine after the operating system was reloaded. Getting a message "iTunes not installed correctly" Error 7 Windoes Error 998. Removed and retried installgot same message??????
This can sometimes indicate that one of the other itunes-related software components is damaged. (Usually Apple Application Support, but there are other possibilities beyond that.)
Perhaps first try a complete uninstall/reinstall as per the following document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Does that get you past the 7? -
Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. javaI have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please. -
I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.
The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes. -
I try to boot the old T2150CDT - error message "sector not found reading drive C"
Hi,
I came by one of these and am trying to fire it up, but I keep getting the message, "sector not found reading drive C". I get this message right after the windows 98 logo appears.
Problem is that I'm limited in what I can do, because I have no floppy drive and dos doesn't recognize the CD Rom drive (drivers missing); although I can hear it during boot up.
So I took the HDD out and pasted the windows 98 installation files into it; then tried to reinstall, but I again get the "sector not found reading drive C" message. Is the drive too large, (It's about 2.1 gigs.)
Would installing the correct drivers for the CD Rom allow me to install from a CD?
this usually works
Thanks,
johnAs far as I know the error message; sector not found reading drive C" appears because of these three different reasons:
- physical HDD fault
- corrupted HDD file system
- bad RAM
In first case you should try to format the whole HDD and should try to install the new OS.
If it will not help, the chances are that the HDD malfunctions and must be replaced. -
Error Message is not displayed on the pop screen for chain end chain
Hi,
I have called a screen in one of the standard program using enhancmenets,
and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
regards
afzalHi,
have you tried option "LIKE" with instruction MESSAGE.
Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
And instead of using a MESSAGE instruction, why to not use a popup ?
Like using one of these function modules (for instance):
TMS_BCU_POPUP_TO_CONFIRM
POPUP_TO_CONFIRM_STEP
POPUP_TO_DECIDE
FC_POPUP_ERR_WARN_MESSAGE
etc...
If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
Regards
Mickael -
after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe -
Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
string[] filenames;
filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
Array.Sort(filenames);
Dts.Variables["filelist"].Value = filenames;
Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzakithere may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/ -
Error: JAVA_HOME is not defined correctly - While running ant.
I have upgraded the JDK 1.5 Update 10 to Update 14. After upgrading the ant is failing when using with cygwin.
It's giving the below error message:
Error: JAVA_HOME is not defined correctly.
We cannot execute /cygdrive/c/Java/jdk14/bin/java
The JAVA_HOME is set properly & even I am able to check java -version.
I am using apache-ant-1.6.5 and cygwin.
Have any one faced the same problem?
Please let me know if you have any solutionsGrrrr. Been having a similar problem, but with Maven2. Allow me to (hopefully) save someone the gnawing of teeth and several bald patches.
For starters, the Maven documentation gives you a pretty clear example of how to set your PATH. This is as follows:
export PATH=/usr/whatever/whateveragain/apache-maven-2.0.10/bin:$PATH
Simple, eh? Note the colon before $PATH. Then, it states quite presumptuously "4) Make sure JAVA_HOME is set to the location of your JDK". However, you don't set it in exactly the same way. You set it in virtually the same way, except without the colon, like this:
export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0$JAVA_HOME
Note that if you get the paths wrong a couple of times, you may reset them with the unset command. So to unset JAVA_HOME you'd use:
unset JAVA_HOME
After which you may set it again. As is advised, you may try to set the user privileges, but they didn't seem to affect my luck at all. Hope this helps! -
JSF: Error Message are not getting cleared
Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
DownloadResponse.sendDownload( response, is, fileName );
faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer.
Maybe you are looking for
-
Safari sometimes loses the "Quit" command. Is there a work-around?
Sometimes the "Quit" command disappears from the Safari menu, and I have to force-Quit the program to Quit it. Is this a known problem? or is there another way to Quit the program without "Force-Quit"? I'm using the latest version of Safari for my o
-
JDBC gives error if accessing Package Synonym
Calling a stored procedure in a package using JDBC... Where we are using a synonym for our package (given all permissions are OK - I've even tried SYSDBA) rather than calling procedures directly in the package, we get the error 'table or view does no
-
XML export, while applying XSLT, gives a jumbled mess
From InDesign, I export to XML and apply an XSLT which transforms it into HTML. Trying to edit the document is almost impossible because the whole thing is a few giant lines of code. What's going on with this behaviour? Can Dreamweaver view it correc
-
How did I get IOS8 on my iPad when I never downloaded it (I do not have auto download)
Hi..all of a sudden I had IOS8 download only iPad mini and I never authorized it-I have manual downloads checked in my setting so how could this happen..
-
MIRO : Direct posting for material
Hi, In posting invoice with MIRO for material, after completion of invoice and posting, system is adding total stock value but not total stock for a material. Do anyone know about it? is it standard one? I am expecting additon of material stock along