Error message "iTunes library.itl" cannot be read....

I downloaded the latest iTunes version onto my new laptop. I have Windows 7. I also have an older laptop with Windows XP. I did an Windows Easy Transfer from my old laptop to the new laptop. After I downloaded the latest iTunes and clicked on the box to open it up a box appeared with the following message: "The file 'iTunes library.itl' cannot be read because it was created by a newer version of iTunes". First, What happened and second what do I do to correct this? Thanks

Welcome to AD! Somebody just posted the same exact question!
Try these directions:
http://support.apple.com/kb/TS1967
The title of the article does not match what you are seeing, but it has worked for others.
Skip step #2, of course.
In step #7, instead of dragging the file over, I would copy & paste it. That will leave the original in the same spot in case you ever need it again.

Similar Messages

Error message: itunes library .itl cannot be read because it was created by a newer version. I downloaded and in stalled the latest version of itunes and it did not help. What now?

error message: itunes library .itl cannot be read because it was created by a newer version. I downloaded and in stalled the latest version of itunes and it did not help. What now?

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

I get the error message itunes library.itl cannot be read because it was created by a newer version of itunes

Hi,
I had my pc reformatted and win 7 64 bit installed. As I have come to put everything back on the pc I accidently installed the 32 bit version of iTunes. I realised this when certain functionality wasn't working.
So I uninstalled itunes and all the associated software, bonjour etc etc and have d/l the 64 bit version.
Now when I try to start up iTunes I get the "itunes library.itl cannot be read because it was created by a newer version of itunes" error message and the application will not load.
Any help would be greatly appreciated.
Cheers,
Dave

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

I'm getting this error message- "*iTunes Library.itl* cannot be read beacuse it was created by a newer version of itunes."

I have my iTunes on a Windows XP operating system. My iTunes Library is stored on a external hard drive(H) with a desktop shortcut on the C drive pointing to the H drive where the iTunes LIbrary is located. I have it set up so that when I click the iTunes desktop shortcut it routes to the H drive and retrieves my iTunes Library from there. I've had a hard drive crash before and lost all of my iTunes Library.
So, if all of that makes any sense, I got a new desktop computer with Windows 7 Operating System and went online and downloaded the most recent iTunes softwear. I then attached the external hard drive from my old Windows XP system to the new Windows 7 Sytem. I routed it the same way I had it on the old system, but i keep getting this error message- "The file *iTunes Library.itl* cannot be read because it was created by a newer version of iTunes." To make matters worse, I tried to put the external hard drive back on my initial Windows XP Sytem and now its giving me the same error message. I know its alot to digest, but can anybody help me?????

For general library squiffiness following an upgrade or crash the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these andcopy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
PS There is also a new iTunes build to download today, so might be worth getting that. A new iTunes should always load an older library file.
tt2

Had to delete iTunes for computer repair. Downloaded new version 10. Would not open -Message: "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"

After getting message below iTunes will not open- just disappears off screen.
Had to delete iTunes for computer repair. Downloaded new version 10. Would not open -Message: "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"

Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2

Installed itunes on my windows xp. getting message itunes library itl cannot be read because created by newer verson of itunes. should i remove in control panel

install itunes on my pc windows xp. got message: itunes library itl cannot be read because created by newer version of itunes. should i go to add/remove programs & uninstall then reinstall?

Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

I updated to itunes 11, uninstalled it according to directions, and re-installed itunes 10.7.021 for windows 64bit. Now Iget the message itunes library.itl cannot be read because it was created by an earlier version of itunes

I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

ITunes library.itl cannot be read error message after new installation

Hi,
I have just downloaded iTunes to install on a new Lenovo laptop running Windows 8.1, and after installation I have received the following error message "iTunes library.itl cannot be read because it was created by a newer version of iTunes".
It was a 'clean' installation - I did not have any previous versions installed and have not yet copied my music across to the laptop or connected by iPod.
Any suggestions?
Thanks

Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

Just downloaded 10.6 and cannot open itunes get error:ITunes Library.itl cannot be read because it was created by a newer version of iTunes

Just downloaded Itunes 10.6 on windows7 64bit and now cannot open Itunes get error msg:ITunes Library.itl cannot be read because it was created by a newer version of iTunes.Tried uninstall and reinstall any help ? Thanks

Even I am facing a similar problem. Initially the iTunes worked on my windows 64bit edition. Ever since I downloaded the latest version it has stopped identifying my 4S with an error msg that asks me to download the 64bit edition. I have tried it again and again but it did not help. After unistalling and downloading again the new error msg says " the file- iTuneslibrary.itl cannot be read because it was created by a newer version of iTunes". Please help!!!!!!!

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

See Empty/corrupt iTunes library after upgrade/crash.
tt2

Installed iTunes 64 on Windows 7 (home) HP and received this error message. The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Please help.

I installed iTunes 64 on a Windows 7 (Home) HP Pavilion and received this error message. the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Please help!

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

I cannot get i-tunes anymore. I tried the i-download. Still no help. I get an error message that reads The file "itunes Library itl" cannot be read because it was created by a newer version of iTunes. What can I do? tunes down load

I cannot get i-tunes. I tried the download, but no help. I get an error message The file "iTunes library itl" cannot be read because it was created by a newer version of iTunes. Any suggestions?

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

Updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian

Uninstalled Itunes because of issue, reinstalled with newest version, now it won't read my library. Error message "The itunes library.itl cannot be read because it was created by a newer version of itunes"

Error message when opening itunes...The itunes library.itl cannot be read because it was created in a newer version of itunes... how do i fix, it will not open with any of my ipod, ipad, iphone.

I don't know why this error occurs, unless you have attempted to downgrade iTunes.
This method should get you up and running again.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". I cannot now access iTunes. How can I resolve

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thanks

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Error message "iTunes library.itl" cannot be read....

Similar Messages

Maybe you are looking for