Error Message K/ 839 (CO-PA condiction type inactive) in F110

Dears,
As we generate the payment proposal in F110 the system returns error message "K/ 839 - CO-PA valaution, condiction type Z001 inactive".
Z001 is a condiction type that we assigned in CO-PA pricing, in transaction 8KEV.
Is there any where I need to activave the condiction type, as says the error messagem? Where to do it? Or the error might be related to an other phenomenon?
Thanks in advance.
Roger Aquino

Hi
Have you assigned this costing sheet to Record Type B in KE4U??
If yes, check the same
Also, check if any exits COPA0002 or COPA0005 is in Place which is triggering the same
br, Ajay M

Similar Messages

  • Error message "Unable to load plug-in type"

    Hi I used plugin registration tool and updated an existing plugin by a new dll.. and then afer that I started recieveing error messages on the CRM on our Dev environment. Error message "Unable to load plug-in type" it was registered for contact entity for
    post create and update but we are getting this error on any entity updates and creates..
    Any help on how to resolve this issue with be deeply appreciated.
    thanks in advance,
    Future MVP

    While this thread is 3 years old, yet I just encountered the same problem about half an hour ago, and I believe this is a bug within CRM Solution Import routine.
    What I had was a plugin which was imported previously. Then, I added new plugin steps and got 'Unable to load plugin type' when registering the new plugin steps I added.
    The solution I have is:
    a. Import just the plugin assembly without the new plugin steps, and publish.
    b. The plugin assembly is now updated with the new plugin class definition. Then add the new plugin steps and import the solution again.
    c. The solution should now be imported successfully.
    What I believe the bug is CRM Solution Import routine checks for the plugin class/type definition in the existing plugin assembly in the server rather than the new plugin assembly in the solution being imported.
    By the way, all solutions are unmanaged. Perhaps, the same bug will not happen in Managed solution.
    HTH anyone else experiencing the same issue.
    Henri

  • Vimeo video unable to connect. Error message says "video format or mime type is not supported.

    Hi I am using a template with a full screen video landing page but i am unable to get Vimeo to video to connect. Error message says "video format or mime type is not supported".
    I have uploaded successfully to Vimeo however when published to catalyst and previewed the error message "video format or mime type is not supported." is displayed.
    Is this a format issue? I should point out I am using a template from Museworld as I am not a designer or graphic artist just another noob.@

    Hi,
    This seems to be a Firefox error:
    Firefox error: video format or MME type not supported - Articulate Storyline Discussions - E-Learning Heroes
    Kindly check if you are able to view the video on Vimeo.
    Also, try using another browser.
    Hope it helps,
    Sonam

  • Error message pops up:  url files of type "file:" are not supported.  How can I get rid of this?

    Error message pops up:  url files of type "file:" are not supported.  How can I get rid of this?

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

  • Itunes won't open after downloading last update. Error message says "not supported by this type of Mac"

    Downloaded latest iTunes update. Now iTunes won't open, and the error message says "You can't open the application iTunes because it is not supported on this type of Mac." I have been using this MAc since 2008. Any suggestions appreciated.

    Welcome to Apple Support Communities
    It's a common problem that some users have after installing the most recent iTunes. Download and install again iTunes 11.0.3 to solve that problem > http://support.apple.com/kb/DL1614

  • Getting an error message when trying to do mov type 521

    Hello All,
    When we are trying to do Movement type 521 for a material and plant we are getting the error message and not allowing to do the movement.
    Please help us to solve this issue.
    Thanks in advance
    Kalyani

    Check your material master for a x-plant or plant specific material status.
    This status is probably customized to prevent movements.
    Obtain the person who has entered the status from material master change history and talk to them about what you are trying to do and if the status needs to be removed or you need to choose an alternative solution for your movement.

  • Error message: Unable to cast object of type 'System.DBNull' to type 'System.String'

    Hi everyone, I have recently installed a trial version of SDL Trados (a computer-assisted translation software) and at some point (when I try to create a new translation memory) this error message appears: Unable to cast object of type 'System.DBNull' to type 'System.String' Is this a problem with the software or the laptop ? If it's the laptop, can you please help me solve this ? Thank you,Caroline

    Actually there was not problem witg the laptop ! Please ignore this topic. Thanks.

  • How can I burn a dvd with a short movie file on my Imac so it will play on a dvd player? I keep getting an error message on my player "wrong disc type".

    How can I burn a small movie file to a dvd that will play on a dvd player? I keep getting an error message "wrong type of disc" on my player. My burner is built in to my monitor. Will I have to buy software such as Toast to burn with?

    I'm using the burner utility that came with the computer. The video is on I took with my small camera. I'm using a DVD-r disc and I drag the file to the disc icon then hit burn and everything seems ok. I can remove the disc and put it back in and see the file but if I put it in a DVD player it won't play, just get error message.

  • Error message:enter rate GBP/MYR rate type M for 01.05.2008

    When we try to post the GL account document using t-code F-02 the
    system does not allow us to post by pop up an error message Enter rate
    GBP?MYR rate type M for 01.05.2008 in the system setting.

    You must have update the OB08 table for GBP to MYR for 'M'
    But not maintained for MYR to GBP. for 'm'
    If your local currency is MYR and GBP is a direct quote always maintain:-
    M -  1 GBP   agansi direct say 40 MYR
    M - 0.02 MYR indirect against 1 GBP 
    Regards,
    Alok

  • Error messages in KO88-"Not set valuation type"

    It shows many messages-
    "Sender：ORD MZ000610376 RME1100SC28C6T-400-LF    not set valuation type for the material 1002-00176" when executing KO88.
    I do not understand what this message means.Did anyone have been  encounter this message before?

    Hi,
    what is the 5-digit error message number for the mentioned message ? For example "KOxxx" ?
    Best regards,
    Andreas

  • I tried to download photoshop 13 and i get an error message that it is the wrong type of file. I have photo shop 8 installed. What is wrong

    Photoshop 13 wont open. It appears to be installed but I get an error message.

    what's your os?
    what file (name and extension) did you download?
    hint:  if win os, download both an exe and 7z.  put both in the same directory and double click the exe.

  • BORGR 649 error message while posting with 105 mov type

    Hi Gurus,
    I faced a problem when I try to post with 105 mov type, when material doc is related to Inbound delivery.
    Explained better:
    I did a purchase order with inbound delivery confirmation.
    I carried out Good Receipt (related to Inb delievery) with mov type 103 (blocked stock from PO)
    When I try to post stock with 105 mov type, the following error appear:
    "Movement type 105 not allowed as it is not assigned to item category"
    Msg ID: BORGR
    Msg no: 649
    I already checked delivery item category configuration, movement types involved and transactions allowed for each mov types.
    Take care that the error mentioned doesn't occur if posting is related directly to purchase order, instead of inbound delivery..
    Thanks in advance
    Regards
    Ale

    Hi Sandra_PF
    in the inbound delivery the mov type is not 105, but 101 (correct, it's the default value for Inb delivery)
    With transaction MIGO I do 2 different operations (in 2 different moments):
    1°) Good Receipt referred to Inbound delivery (103 mov type - Blocked stock from PO)
    2°) Stock posting with 105 mov type, to transfer stock from Blocked to Unrestricted
    Here the system notice me that is not possible, because the mov type 105 is not assigned to the delivery inboud category.
    Please note that we did the same thing in another system with the same configuration, without any problems..
    Cheers,
    Ale

  • Error Message- JTV has content of MIME type "application/x-mplayer2."

    Because you don't have a plug in installed for this type of Mime this content can't be displayed.
    Where do I go to get this plug in so I can view content that I'm needing to view?
    Thanks!

    http://flip4mac.com

  • I cannot get a dvd to play. The error message says "media type not supported". I think it is a .m2ts. Any idea on how I can get it to play?

    I cannot get a dvd to play on my computer. The error message says in iDVD is "media type not supported".
    The DVD was produced with a video camera and is in HD format. I think the the format is .m2ts?
    Any ideas on how to get this to play?

    Check out > Mac App Store - Free MTS M2TS Converter
    and/or others at > playing .m2ts format in OS X - Google Search

  • I keep getting the error message on my MP510, the type of printhead is incorrect install the correct

      Recently my printer stopped printing black, although it would print the other colors. When I tried to print a print pattern, it would not print the checkered pattern it used to print to check the alignment. I tried cleaning, to no avail. Then I got the message: the type of printhead is incorrect, install the correct printhead on my control panel. Now when I turn on the unit, I can't do any maintenance or anything, it just shows the same error message as noted. I talked to a Canon representative, and he said to clean the printhead, I did. That did not help. My questions are, is the printhead bad. Second, it would seem I can replace the printhead. Just what is the likelyhood the printhead is the probnlem, or is this problem a problem that can only be curred by a service tech? Canon informs me this printer is not serviceable anylonger? So, I guess I'm on my own? They offer a deal on another printer at a reduced price. Frankly, I don't think my printer needs to be replaced, just fixed. If all that it requires is a printhead, I'm sure I can do the replacement. Just what are the odds replacing the printhead will solve the problem? I'm quite certain this error message has occured before on this type of printer, and other users have probably figured out the solution? Can someone help? Thank you.
    Rick

    Hi sciencemagic,
    The major cause for this type of error/issue is the printhead.  In most situations, replacing the printhead will resolve the problem.  However, the error may appear because of another internal malfunction with the printer.
    Another thing to consider is the cost of a replacement printhead, which may exceed the cost of purchasing a newer printer.  With the newer printer you also get access to newer printing features and technology including better image quality.
    For these reasons, I recommend exploring the replacement option, but we are happy to help with any available service options for your PIXMA MP510.  Contact us to discuss your options further.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for

  • Pacman : returning error 16 from alpm_db_update

    Recently, yaourt behave oddly on my homeserver, outputting some truncated errors messages as if they were answers from a regex search. Long story short, I tried to fix the problem but did not yet succeeded, so maybe someone here will help me. What I

  • E-mail to all of our portal-users

    Hello, I'd like to send an e-mail to all of our portal-users to keep them informed about our new products. I currently do so by using the news-iview "send-to" feature, but every time I try to send an email, I get the following error message: resource

  • Mac Projectors not working at all

    Hey all, This issue is very frustratring... I am simply trying to publish a Macintosh projector from a PC running Flash CS3. It creates an app folder fine, but when I drag it over to any of the several Macs in our office it doesnt run. I also tried t

  • Print Greyscale Within A Colour Document?

    Running: Windows XP & Acrobat Pro X Hey Guys, I have a 60 page document that needs printing, and there are 40 text only pages containing black and white and 20 pages with colour. I am wanting to know how to lock down those 40 pages so they print in g

  • Using form from a table

    I want to use a form from a table because it will create all my ddl. However the table I want to use I have to get the description from other tables using a foreign key. Can this be done. Currently I am trying to do this with a report but I have to m