Error message - KD199 Enter a valid value when Closing the Project at CJ20N

Hi All,
As I am trying to close a Project at CJ20N I have faced an error "Enter a valid value for the settlement type Message no. KD199"
I have tried to remove the settlement rules to one of its WBS element, but I could not. System shows the same message - KD1999.
Could you pls let me know how to resolve this to close the Project.
Thank you
Chandu

Hi Chandu,
I hope you have already setlted the project, since the system will not allow you to close the project unless there is Zero balance in the project. In this case, you can live without removing the settlement rule from any of the WBS element.
If there is any need to have this settlement rule removed, I suggest to change the settlemet profile to " Do not settle" and check once again. ( If there is any cost already posted, then repost the same to any other receiver.)
Hope this helps,
Srinivas Potluri

Similar Messages

Error message F5901-Enter Business Place Value

Hello Friends and experts,
I am trying to enter a cross company code vendor invoice posting (vendor line in one company and all the expense lines in multiple co.cds). When I try to post the entry I am getting error message F5901 - Enter Business Place Value.
The error is coming after we have upgraded to ECC 6.0 EHP5 from ECC 5.0 SP13.
I have checked the customizing. We have not activated Business Place functionality for any country in our system.
I did not even find any SAP note in this regards.
Does someone has any clue on what may be wrong and how to fix it?
Regards,
Vishal.

Hi Tanmay,
You might have created a validation rule for Business place in order to track the TDS as per Business place. Please check it in GGB0 and OB28 and input the Business place at transaction level if needed.
Thanks

Error in VA01: Message 00002 'Enter a valid value'

Hello Experts! When I try creating a sales order in VA01 after entering the order type and other mandatory information, I get the error message (no. 002 of class 00) saying 'Enter a valid value'. When I searched other threads in SCN with the same message, I found that this is probably because of authorizations or incorrect values in user parameters. I executed SU53 immediately after the message was issued and found that the check was successful. I even checked the profile parameters for my user ID and everything seems perfect. In fact, I was able to create sales orders until two days earlier and no user settings were changed since then. I tried creating orders from other user IDs and the same message is issued.

after entering the order type and other mandatory
information, I get the error message
If possible, share here after entering which mandatory field, system was throwing this pop up error.
G. Lakshmipathi

Error in LSMW : Enter a Valid Value

Dear All,
I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
I am selecting 14 Views in a single LSMW.
Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
Can anybody tell me why I am getting that error.
Thanks in Advance.
Tulasi

Perform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin

Failure to register Adobe Photoshop in myAdobe account. Error message states enter a valid Serial Number

Hi,
I have a licensed copy of Adobe Photoshop CS6 Extended, it is okay when I enter the serial number in the application but when I try to register it online with it comes up with an error message "enter a valid serial number"?

Hi Ashutosh,
I am talking about registering the product in MyAdobe not the application. The application accepts the serial number, however, online registration is not accepted. The myAdobe ID is [email protected] and the serial number is [serial number removed]. I have 2 adobe IDs how can I transfer the applications from one ID to my preferred ID and have the [email protected] ID removed? Sorry for the two questions.
[Mod note - serial number removed.]

Query Designer: Error-msg: Please enter a valid value for charact 1FORMULA

Hello BI friends,
when I open a query in the Query Designer (or change query from BEx Analyzer) I get this message. There is no detail description for the message. After pressing the OK-button in the message I get an u201Demptyu201D Query Designer (to create a new or open a query).
The query contains some formulas, I know. I have checked the query by starting it via RSRT and debugging. There is only a warning (exception contains a non-numeric value).
But how can I check the formulas, exceptions or something else if the Query Designer doesnu2019t show the query definition?
Thanks in advance!

Hello Karen,
thanks for your answer.
Unfortunately I didn't mention yet that we have BI 7.0, but I'm using a 3.x query and 3.x QD. The query has not been transfered to 7.0 level (I hope it, since other colleagues work in the system too). How can I check the level (3.x / 7.0) of the query?
I have checked the table RSZRANGE, but I didn't find any row for the char. 1FORMULA, I have checked the fields IOBJNM, FACIOBJNM and ATTRINM. I also didn't find a row for RSRREPDIR-COMPUID = RSZRANGE-ELTUID. Did I search in a wrong way?
I have also checked the program COMPONENT_RESTORE, but I didn't start it for the IProv, comp type = REP and the special query, because I'm not sure what I'm doing there exactly (the program has no documentation).
Is it still the same way as you have described under these conditions?
Best wishes
Britta

How do you stop Firefox from suddenly getting an error message saying tabs are still open when opening the browser??

We have a MAC OS X 10.6.8 and all of the sudden when we close out of Mozilla (both by using the red x and also using "quit") the next time we open Mozilla it has a "well this is embarrassing" Error screen and asks us if we want to re-open our last session. Then it will have whatever email, webpage, fb page, etc that we were on and we can either close it or reopen it.
This started last week, we have had the computer 2 years and have never had this problem before. I tried re-starting Mozilla and after a few hours it started doing it again.

hello, this should be addressed in a later version of firefox. as a workaround in the meanwhile you could try this: enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''browser.sessionstore.resume_from_crash'''. double-click it and change its value to '''false'''.

Cannot create RFQ : Please enter a valid value

Hi all,
Kindly help me in my problem. I was trying to create a RFQ from my RFI. However, upon clicking on the "Create Follow-on Document", the error message "Please enter a valid value" appears. This message also appears when I tried changing the RFI. Please help me. Thanks!
Thanks and Regards,
Happy

Hi All,
This was resolved after our patching
Thanks and regards,
Happy

FV50-- Editing Option Error "Enter a valid value" Message 00002

Hello FI experts,
An user is trying to execute a tcode FV50 and clicking "Editing Options" to make changes to "Doc.Type option" from "Document type hidden" to "Enter with short name" under " Special functions for single screen transactions" section.
When the user clicks SAVE button in "Accounting Editing options" screen, user is getting the the error message "Enter a valid value".
Can anyone tell me how to change this option and resolve this error?
There are users they are successfully able to change it and I am even able to change the document type options without encountering this error.
Any help on this is much appreciated!
Thanks,
Himadama

Dianne,
Thank you for your prompt response.
The user has done modifications in FB00 but issue is still there.
Could you elaborate more on what has to be done in this FB00 tcode?
Thanks much.
Thanks,
Himadama

Enter a valid value error

Hi,
Can anyone pls. help us figure out the problem with the newly created business partner master records? We get an "Enter a valid value" error message when the agent (user) tries to confirm the business partner in CIC. The user got the same error after she created another bp master record.
I created a third bp master record for the same customer but in another application server. I didn't get an error so I asked the agent to use this bp master record instead of the first 2. Unfortunately, the user got the abovementioned error again after editing the bp master record that I created in the original application server.
Hope you can help us.
Thanks in advance,
Theresa

Perform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin

ERROR BRAIN (599): for characteristic 0FISCPER Please enter a valid value

Hi,
Weve an BI 7.0 System with Patch Level SP12 which is previously connected to an NW 7.0 Portal System + BI Java that has SP13 installed.
Were able to create Queries and Web Templates via Query Builder and WAD for BI 7.0 and publish to portal.
Recently, weve installed a new NW 7.0 Portal + BI Java with same package level. We made the configurations for Bex via Template Installer and everything is ok.
Our reports has a 0FISCPER characteristics and when we run the reports in new portal, it displays the report. But when we want to change period and click the button created to set period, a popup opens and errors like "for characteristic 0FISCPER Please enter a valid value " displayed on popup.
#1.5#005056915E48007200000013000016D000044A7EAFACF8B0#1207807880509#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/irj#com.sap.ip.bi.base.application.message.impl.MessageBase#bcepik#2422##sapportal_TFP_5354550#bcepik#96c2d31006c411ddae48005056915e48#SAPEngine_Application_Thread[impl:3]_31##0#0#Error#1#/Applications/BI#Plain###A message was generated:
ERROR BRAIN (599): for characteristic 0FISCPER Please enter a valid value
MSGV1: 0FISCPER
MSGV2: 200.001.#
When we change BIs Portal back to old one by changing the RSPOR_T_PORTAL table (default portal), it still works there.
What may be cause this situation as it works on one portal and not works on another?
Best Regards

Hi,
Pls chk the Note 770174 - Values for 0FISCVARNT not correct - BRAIN E 599
Symptom
In case of web templates the value help for 0FISCYEAR doesnot work
correctly. Error message
For characteristic 0FISCVARNT, enter value in permitted format
comes up
Other terms
OLAP: F4 - 0FISCYEAR, 0FISCVARNT ,
0fiscyearvalues_generate, master data read class , value help , F4
Reason and Prerequisites
Program error
The selection option sent to the method 0fiscyearvalues_generate
based on 0FISCVARNT are not porcessed and hence as null row is
inserted in the resultset that cause the problem .
Solution
BW3.0B
           Import Support Package 24 for Release 3.0B (BW3.0B Patch 24 or SAPKW30B24) into your BW system. The Support Package will be available when note 0723193 with the short text "SAPBWNews BW 3.0B Support Package 24", describing this Support Package in more detail, is released for customers.
BW3.1C (Content)
           Import Support Package 18 for Release 3.1C (BW3.1C Patch 18 or SAPKW31C18) into your BW system. The Support Package will be available when note 0723260 with the short text "SAPBWNews BW 3.1C Support Package 18", describing this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 9 for Release 3.50 (BW3.50 Patch 09 or SAPKW35009) into your BW system. The Support Package will be available when note 0763335 with the short text "SAPBWNews BW SP09 NetWeaver'04 Stack 09", describing this Support Package in more detail, is released for customers.
This note may already be available before the Support Package is released. However, the short text will still contain the words "preliminary version" in this case.
Hope this helps,
Regards
CSM Reddy

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

Encountering Error in webadi : "&Value is invalid. Enter a valid value for the Mapping column &Column"

We are having a custom WebADI, containing a field (Employee Name) which is a LOV.
The LOV has ID : Person ID, Meaning : Employee name, Description : Position Name.
There are multiple records with same Employee name but different Person ID.
If I select an Employee in the LOV which has multiple records (through different IDs), I am getting an error in WebADI:
"Enter a valid EMPLOYEE_NAME.
XX is invalid. Enter a valid value for the Mapping column EMPLOYEE_NAME"
The Query for the LOV is correct and is returning correct records.
Any pointers on this issue highly appreciated.

Hi,
The problem could be with HR security profile attached to the responsibility from where you are launching the spreadsheet. Check it once.
Thanks.

Error in MDDataSetBW.GetCellData.Please enter a valid value for character

Hi All,
We have a mandotory prompt on 0FISCPER for Web I Report . The promt is present in the universe.
The query works fine in Dev , but in Quality it shows the following error
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Please enter a valid value for characteristic 0FISCPER.. (WIS 10901)
The universe is on BW Query and the BW Query works fine.
Can someone please help on this

Thanks Sathish for your input.
We have created report level prompts and facing this issue because we were selecting multiple values for prompts.
Its working fine for single selection. Is there any way to enable multi selection for the particular object at the BW end ?
Or else we have to create the prompts (Single selection) at the universe level.
Regards,
Pranay

Error message - KD199 Enter a valid value when Closing the Project at CJ20N

Similar Messages

Maybe you are looking for