Error message KD625 during WBS settlement.

Hello Experts,
I am trying to settle WBS element to AUC with investment measure in the current year, which has a balance from 2006 and getting the Error Message KD625.
Kindly suggest me the solution.
I found the below OSS notes but not sure how relevant are these for my issue.
1) 425601
2) 819197
Could anyone suggest me the solution?
Thanks & Regards,
Akash Patil

Hello Gordon,
Thanks for your reply.
You have read my requirement correctly. Is every thing fine if I Implement note 819197?
I am not sure what impact will be after implementing it.
since we are settling it to the AuC investment measure.
And I found one more note 425601. Is this note also relevant for us? I am not sure about this note. Whether we need to implement along with the note 819197.
Please suggest me.
Regards,
Akash Patil

Similar Messages

Error message KI089: Substitution of settlement senders is not allowed

Hi ALL,
To meet the demand of the company, was created a substitution (OKC9) to replace the field value COBL-AUFNR through a user-exit. However, when performing the process that calls the exit in question (transaction KO88) is shows the error message KI089 (Substitution of settlement is not allowed senders).
Searching the SAP Support Portal could see that there is a note to resolve this problem (SAP Note 317894), but this note would not be valid for SAP ECC 6.0.
Does anyone know whether it applies to SAP ECC 6.0? I think it's the only solution to solve the reported problem.
Regards
Kelson Marcos

Hi
I believe the sender should never be substituted. If you posted values to an Order, the same should receive a credit upon settlement. Else, it negates the whole concept of settlement
I referred to the note you mentioned. What I perceived is you cant substitute a sender during settlement and thats right as per my knowledge
Ajay M

Error message (M3024) during parallel goods movement

For publication distribution, collected unreferenced deliveries and goods issues are done in SAP system for a customer group by a program which is triggered by a web service every day. Standart SAP functionalities are used in this program. At goods issue part of program, an error message is occuring "Valuation data for material & is locked by the user &" with error code :M3024. The user who processes the program is locking himself. Also we have checked the other goods movement types in standart transactions (MB1B-MB11..)and same problem was occured. We have checked the notes that we applied before for to avoid material lock in paralel goods movement. There is nothing changed both in customizing and deveploment after upgrade. So we couldnt find the way to fix this problem. FIRST ANSWER FROM SAP***************************************** Can you kindly review the attached note 70865 with regards to this issue. WE APPLIED.-- We reviewed 70865 and this solution not applicable for our current system. According to note; We set material late lock exclusive time 15 seconds in OMJI. This solution solved material lock error at all plant level. After this solution, We get same batch error during goods movement(m3862), Then We applied note 157423, this note solved material batch lock error during goods movement, At last we have now m3024(Material valuation error lock) error during all goods movement. THEN********************************* As explained in the note 70865 , to ensure data integrity, it is necessary to block the material against updates by other users during good movements. This is achieved by blocking the material plant (lock object MARC) and the material valuation area (lock object MBEW) exclusively against othertransactions which update the material master. What you can do, as advised in the note, is to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously. The problem is that you will experience a disadvantage of performance loss after this change. Please, notice that with this change in OMJI, several users will be ableto carry out GOODS MOVEMENTS to the same material and plant simultaneously. This change will not allow the simultaneous input of a goods movement and an invoice for the same material (in this case, the material will be locked as soon as the purchase order item is adopted in the invoice and the error message M3024 will occur). When the error message M3024 occurs, you could check with transaction SM12, there you could find some tables like MBEW are locked by user. The table is locked to prevent valuation, quantity etc. to be updated. System does not check if it is standard price or MAP, as soon as you work with one material it will be locked (its valuation data has to be locked, because otherwise there is no guarantee of the consistency of the stock values. Without this lock mechanism the possibility of serious data inconsistencies could arise). your customizing under: SPRO > IMG > Material Management > Set up Material block for goods movements Here you could choose setting 2(at positing) to have only a short locking period at posting. Please review information in attached notes. 521945 FAQ: Material block 322989 Late block: Number of blocking attempts AT LAST ** PROBLEM STILL GOING ON WHAT SHOULD WE DO TO SOLVE THIS ERROR.

HI Fatih,
Refer to SAP Note 1744780 - Error message M3024 during Invoice Verification process .
In the standard system it is not possible the simultaneous entry of a GOODS MOVEMENTS and an INVOICE for the same material and the same plant.
When you enter the invoice for the purchase order item, the valuation data for the material is updated, therefore this valuation data (table MBEW) needs to be blocked so that it is not changed at the same time by any other transaction (which might cause inconsistencies).
Resolution
This system behavior can not be avoided by any customizing setting or any user exit.
This is correct system behavior to protect the other transactions update the material master.
As advised in the note 70865 :
It is possible to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously, however there is a risk to cause the data inconsistency and performance problems.

Got an error message -43 during back up step of recent update

Received an error message (-43) during back up step of recent update attempt to iOS 5 for my iPhone 4. Tried several times with the same error message. Anyone know how to get around this issue?

And now, with the new iCloud Control Panel 1.1, still an error, in English this time:
Outlook Setup Error
Your setup couldn't be started because of an unexpected error.
I was able to click the Report button, here's the beginning of the text it emailed:
Help Apple improve its products by sending us diagnostic and usage information about iCloud.
By sending this message, you agree that Apple will collect and use this information as part of its support services and to improve its products and services. To learn more about Apple's Privacy Policy, see http://www.apple.com/legal/privacy.
Your setup couldn't be started because of an unexpected error.
Error: 0x80004005: CopyPSTFoldersToCache
Error: 0x80004005: GetZ1Store
Error: 0x80004005: HrGetOneProp on Z1Store failed
AppleOutlookDAVConfig version: 3.2.16.0
Windows version (6.1.7601): Windows 7 Ultimate Edition Service Pack 1 (build 7601), 64-bit
Local app data directory test: Pass
Temp directory test: Pass
Outlook version: 14 (14.0.6109.5005), x64
Outlook location (installed): C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE
MAPI location: C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Hotmail Connector Store Service, 975C4FC305EB4BBBB1992A7570EC7CF9
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
[Services]
NOTES=Lotus Notes Mail
MSN_CON=Microsoft Outlook Hotmail Connector
APLZODSERVICE=iCloud
[NOTES]
PR_SERVICE_DLL_NAME=nwnsp.dll
PR_SERVICE_SUPPORT_FILES=nwnsp.dll
PR_SERVICE_DELETE_FILES=nwnsp.dll
PR_SERVICE_ENTRY_NAME=ServiceEntry
continued...

BS014 error message when trying to settle a WBS

When I try to settle WBS element - WDC-1-01-11,
I get an error message BS014 -
"Diagnosis - For object wbs WDD-3-02 user status XX according to this status settlement is not allowed.
Procedure- you can only carry out the requested function, if this is allowed according to the status of the object."
However, WDD-3-02 is IRRELEVANT to this procedure, Its WDC-1-01-11 which I am trying to settle, WDD-3-02 has no connection to WDC-1-01-11.
WDC-1-01-11 doesnt have user staus XX.
Thanks
Orly Shporer

Hi
Either the WBS elements have a connection through settlement rule
OR
They have a parent child relation...
W/o this, system wont reference the other wbs eleemnt...
br, Ajay M

Windows 8.1 and most recent version of Airport Utility. Error message 6722 during connection.

New computer with Windows 8.1. I have downloaded most recent version of the Airport Utility. The utility finds by airport express but during connection I get error message -6722. I suspect Windows 8.1 is not compatible with my first generation Airport Express but before I buy a new one would like to know for sure.

More compatible than v2 of the Express which you cannot configure from windows.. all the later airport routers need v6 utility to configure them.. and this is not available for windows.
These issues arise due to all sorts of things.. the error message is very unclear in its meaning.
Plug the Express into the computer by ethernet. Do a factory reset on the Express and see if you can set it up by ethernet.
Wireless products can be a problem. Set the Express to fixed channel, 11, 6, 1 in that order.. with no security and a simply name, for both the express and wireless. No spaces and pure alphanumeric.
If the computer cannot connect under the most ideal situation nothing else will fix it.
If you have an ipad iphone with iOS v6 or later then you can use the apple version Airport utility which is much more likely to work than windows.

FI Document created during WBS settlement

Hi Everyone,
I have an issue regarding the FI document generated while running CJ88 for WBS settlement. We settle a WBS to a Cost Center, after it, three documents are created, an FI document, a CO document and a Profit center Document.
Logic tells me there shouldnt be an FI document in this situation since im settleing between two cost objects. For example when we settle internal orders no FI document is generated.
I've checked many threads in SCN about said FI document and i cant find a definitive reason as for why is this document is generated during the settlemet, many threads about it are not answered and some others are not very conclusive.
Nevertheless! I can live with the FI document but i'd like to change it from the standard "SA" document to "ZA" for analysis purposes. We created de document type and i've changed the settlement profile to use ZA but still after we settle a WBS an SA document is created.
Can anyone shine any light on this issue? either pointing me in the right direction to modify the document type or by explaining why is it generated?
Thank you in advance for your time.
Pelayo.

Hello Chauhan,
My settlement profile is enabeled for Cost Center, Order and Fixed Assets all as optional, however the settlement rule in this specific scenario is from WBS to Ctr. (both elements have a Profit ctr. assigned.
Under Other parameters i've set Document type as "ZL".
The system creates an FI document like this.
50
5XXXXXXXX1
123.456,00-
USD
PCtr 2
40
5XXXXXXXX1
123.456,00
USD
CCtr 1
PCtr 1

Error message occurs during CS5 Master Collection Trial Install.

I downloaded the trial version of CS5 Master Collection from the Adobe site. Everything works until after I enter my password to start installation an error message comes up saying:
The Setup encountered and error(-1) during install. Please restart the machine and try again.
I've done that and it still shows the same message! What do I do?

Since CS5 is from 4+ years before the Cloud, this is not the right forum... but I don't really know a correct forum for that very old product
Have you tried to manually update the individual programs?
All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

IPad 1 upgrade from 4.3.1 to 5.1.1 and error message 0e800400C during backup. The response I get is that it is trying to backup my ipad.

I'm trying to upgrade my ipad and it tries to backup before the upgrade. During the backup I get an error message 0e800400C and a promot that if I continue I may lose data (I'm ok with it. I have already cleared data and settings). When I press continue, the upgrade stops and the Ipad restores automatically. So, I'm unable to get it done. Any thoughts on what I may be doing wrong?

The first generation iPad can't be updated past 5.1.1.
(114934)

Error Message ME083 During Creation of PR (ME51n) Charge to Sales Order

Dear MM Expert,
I am creating PR(me51n) with accoutn assignment cat C- Sales Order.
After enterring Quotation no and line item, the system still trigger the error message ME083 Enter Sales Document.
The Sales Order No field is set as mandatory and even if i key the value of the quotation no, still the error message appear.
I tried to create PO (me21n) with the same account assignment and enter the quotation no and system accepts without any error.
Any OSS note that can rectify this. Thanks in advance.
She

Hi,
I am assuming you have a Account Assignment Category,-- This means you have to enter a Sales order number in the PR line item , ine ME51N , Line Item " Account Assignment" Tab,, enter the Sales order number and line item number and you can get rid of this error message.
Hope this helps,
Thx
MJ

Solution for Error Message RSAODS015 during transport

RSAODS015 "No fields were supplied
No details are provided for this error message
This usually means that certain InfoObjects are missing and required for the Transported Object to be activated.
example: Transporting an InfoSource may be incorrectly reported as successful even though certain InfoObjects do not exist on the target system and are required by the InfoSource. Later on if you transport an InfoPackage requiring these missing InfoOjects you will receive this error. So basically Transporting an InfoSource does not correctly report that there are missing InfoObjects.
Hope this helps.

Hi Kenneth ,
Possible reasons for this error may be :
1. all the objects are not properly collected in transports .
2.The sequence of transports should be proper ex -> infoobjects,cubes,Multiprovider,Query .
3.It may happen that any one of the object is not yet transported so higher level requests are getting failed .
Please check the object and there dependency with other objects.
Regards,
Jaya

Exchange rate type for version - error message GP541 during confirmation

Hi FICO Experts,
I bumped into a problem during confirmation in CO15. (I would like to get the SFG by mvt 101 and consume the raw material by 261).
The error messase I get is:
Maintain the exchange rate type for version 000 in 2009
Message no. GP541
Diagnosis
You want to use plan version 000 with controlling area 1000 in fiscal year 2009.
You have not specified an exchange rate type for this plan version for fiscal year 2009. Since the update of all currencies in 2009 is active in the control indicators of the controlling area, currency conversions are possible and sometimes also needed.
It is therefore necessary to specify an exchange rate type for plan version 000 in year 2009.
System Response
The system will not accept your entry.
Procedure
1. Please maintain plan version 000 first using the function 'Change Plan Version', or
2. correct your typing error.
I'd like to ask you to please help to resolve this issue.
Thanks,
Csaba

go to Maintain Version at SPRO-Controlling-General Controlling-Organization->Maintan Version and do what ever it says. Provide Exchange rate type P or M would resolve your issue

Error message AA001 during changing FL

Hi experts,
I am facing problem during updating ABC indicator in the location, when i select ABC indicator & try to save the FL, it gives me an error "Asset 100044 0 not in company code MY01". But it is totally not related to Asset, i am changing FL, there is no link & no sync with asset. there is no eqp installed in that FL also.
Would you please suggest what to do?
Regards,
Nizam

Hi,
Looks like you have a data inconsistency of some kind. If possible debug to identify why the message is issued.
A possability is that some of the asset fields in ILOA are filled in error. Have a look at ILOA for this functional location and compare with a good functional location. Maybe that will show something obvious and you could correct the data.
If this is a new functional location, an option would be to archive and recreate it.
-Paul

TS1363 my itunes will not update a error message apears during dload C:\Users\Edwin\AppData\Local\Apple\Apple Software Update\ my phone has the new update and now wont sync with my pc due to this

my itunes will not update keeps comming up with a error when dloading the latest version now my iphone4s wont sync as it has the latest software

Is the message refering to a specific .msi file? If so, which particular .msi is it referring to? (iTunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

EndInstallEx return a -2 error-message back during installation

Hi all
I have an add-on that we have an installer for.... It is running on multiple installations and works... However within the last month we have been getting reports that our installer fails when calling The EndInstallEx function that is part of an installer....
How to use the EndInstallEx from the SDK-Help
EndInstallEx():
Call this function to notify SAP Business One that the installation has ended. Otherwise, the installation will be marked as failed. The function returns 0 for success, 1 for error.
Problem is that instead of 0 or even 1 we recieve -2 from the call and result in the add-on fail to install
Some facts and observations:
- We have only seen this happen on Windows Vista
- However some Vista machines does not have any problems
- UAC on Vista is turned off
- User is logged in as administrator
Does anyone know what the problem might be and what -2 from the EndInstallEx function means?

Hi Alexey
A few week back one of our resellers had the problem and reported it to me... I passed the information onto SAP support and they came back that the question had been with development but the would like to do a web-ex to see the installation.
A web-ex date was set but 2 days before the reseller came back to me telling me that the problem was now gone (and he could not explain why, he had restarted the machine a few times that was all)
I returned this to SAP Support who canceled the web-ex and gave the following message back.
Dear Rasmus,
Thank you for the update.
As I would like to see the issue in order to further investigate I would
say we cancel the WebEx for now.
In case the error can be reproduced again kindly send this ticket back
with a new date for the WebEx. In case the message was confirmed by then
please create a new message with reference to this one.
For now I would say it could be a temporary issue related to
authorization or other application affecting the processes.
Should you have any additional questions regarding this issue,
please do not hesitate to contact us.
Kind regards,
Friederike Mundt
SAP Business One Product Support
I would advice you to contact SAP Support on the matter with relation to my message (Message number: 1100015), and let them do the web-ex on your machine instead...
/Rasmus

Error message KD625 during WBS settlement.

Similar Messages

Maybe you are looking for