Error message KI089: Substitution of settlement senders is not allowed

Hi ALL,
To meet the demand of the company, was created a substitution (OKC9) to replace the field value COBL-AUFNR through a user-exit. However, when performing the process that calls the exit in question (transaction KO88) is shows the error message KI089 (Substitution of settlement is not allowed senders).
Searching the SAP Support Portal could see that there is a note to resolve this problem (SAP Note 317894), but this note would not be valid for SAP ECC 6.0.
Does anyone know whether it applies to SAP ECC 6.0? I think it's the only solution to solve the reported problem.
Regards
Kelson Marcos

Hi
I believe the sender should never be substituted. If you posted values to an Order, the same should receive a credit upon settlement. Else, it negates the whole concept of settlement
I referred to the note you mentioned. What I perceived is you cant substitute a sender during settlement and thats right as per my knowledge
Ajay M

Similar Messages

  • Error message MH 175 "The listing end is not allowed to be in the past"

    Hi,
            While I try to execute listing in the new article creation using particular disctribution chain, i.e. with reference to a Sales Org and distribution channel, the error message MH 175, 'The listing end is not allowed to be in the past' popped up. Can you please help me on what could be the cause for this error to be displayed.
    thank you
    regards
    prahlad

    Hi,
       Go to mm42.. enter the article number and distribution chain and then select the Listing View.... Please check the "Listed to" and "for Sale till" date is in past. if so change the date to future and try agian.
    Regards
    GK

  • ERROR MESSAGE : display of the query spec is not allowed

    Hi all,
    I have many queries built under a multiprovider. The problem is if i try to chane a query it is not allowing me to do it. Even for a query which i built it is not allowing. It is displaying an error message 'display of the query spec is not allowed'.
    Can anyone help me in understanding this issue?
    Thanks,
    Raj.

    Have you check your authorizaiton trace with ST01?
    You need authorization for this query in auth obj S_RS_COMP or S_RS_COMP1

  • Problem when adding ascx user control in the MasterPage: Parser Error Message: The referenced file ... is not allowed on this page.

    Hello,
    I have to maintain a SharePoint 2010 project, in which a TopNavigation User Control for SiteCollection is registered in the MasterPage in this way:
    <%@ Register TagPrefix="ABC" TagName="TopNavigation" src="~/_layouts/ABCApplication/MainSite/Navigation/TopNavigation.ascx" %>
    <asp:ContentPlaceHolder id="PlaceHolderTopNavBar" runat="server">
    <asp:ContentPlaceHolder id="PlaceHolderHorizontalNav" runat="server">
                                        <ABC:TopNavigation ID="TopNavi" XMLDataLocation="/_layouts/ABCApplicatopm/MainSite/TopNavigation.xml" IsRoot="true"
    runat="server" />
    </asp:ContentPlaceHolder>
    </asp:ContentPlaceHolder>
    When I deploy the SiteCollection, the TopNavigation user control is working correctly. Unfortunately when i modify the masterpage over SharePoint Designer, the following error message comes allways, regardless of the art of changes i did in the MAsterPage
    ( even if I open the MasterPage, add an space and do save/close the MasterPage).
    "Problem when adding user control in my custom master page, Parser Error Message: The referenced file '/_layouts/Navigation/TopNavigation.ascx' is not allowed on this page."
    Any ideas?

    Hi Simon,
     When we use UserControl in SharePoint Page or MasterPage, and the UserControl is kept in any folder other than ControlTemplates, we will got the error. Here is an article about this issue and provided the solution:
    http://sharepoint-tina.blogspot.com/2009/07/referenced-file-pathxyzascx-is-not.html 
    The solution can also be used in SharePoint 2010.
    Qiao Wei
    TechNet Community Support

  • Message F5 568: Fiscal year 2010 is not allowed

    Hi All,
    While creating reservation through MB21,
    we are transfernig our stock material from one company code to another company code.
    First company code is activated with CALENDAR YEAR, while the other is with FISCAL YEAR (JUL-JUN)
    While creating the reservation, it prompts the following error
    Message F5 568: Fiscal year 2010 is not allowed
    Any suggestion?
    Warm Regards,
    N

    The error is happening because the company codes invloved have different fiscal year variants assigned to them and SAP does not support constellation.
    However, you may want to try opening period 2010 for both company codes if you've not yet done so and try again to see if you will get the same error.
    Please use transaction code OB29 to open calendar year 2010.  This is done by clicking on periods in OB29.
    Elias
    Edited by: Elias Akorli on Oct 28, 2009 12:20 PM
    Edited by: Elias Akorli on Oct 28, 2009 12:25 PM

  • Error message GB554 Substitution Is Not Activated in Selected Application

    Hi,
    I've created a substitution for WBS element by TC GGB1 but when I try to activate substitution by TC GGB4 for Project System the error message  GB554 "Substitution Is Not Activated in Selected Application" appears.
    Could you help me?
    Thanks
    Giovanna

    Hi Giovanna,
    Per my understanding you need to assign the WBS substitution in project profile (Transaction OPSA) in 'Control' tab. You will see a section called 'Substitution' under this tab. Take a dropdown and assign appropriate substitution to corresponding project profile you want.
    Hope this helps.
    Regards,
    Subodh

  • How to raise error message in substitution exits?

    Hello Experts,
    How to raise error message in substitution exits. I have tried with normal statement,
    Message 'Welcome!!' type E.
    But its inot stopped at that error message, Its goes next standard code and picked other messag and shown as error message.
    Th exit seems U100, I that I want to stop by using error message based on some condition. Please throw the answer quickly

    HI Sanjana,
    In the Substitution exits you can create the message in the configuration it self.
    You dont't need raise message explicitly.
    Thanks,

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

  • Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

    Hi All,
    I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
    Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
    I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
    I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
    I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
    I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
    (We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
    Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
    Thanks in advance.
    Ameesha.

    Hi Ameesha,
    i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
    SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
    try this once.
    All check this link.
    [Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
    Hope it helps.
    Regards,
    Raj

  • Some of the songs I have downloaded onto i tunes won't play when I select it to do so.  The error message I get is "The song could not be used because the original file could not be found.  Would you like to locate it?"  How can I get my songs to play?

    Some of the songs I have downloaded into i tunes won't play when I select it to do so.  The error message I get is "The song can not be used because the original file can not be found.  Would you like to locate it?"  When I select yes I'm sent to a screen that has my i tunes library listed.  When I select the song in question I'm asked if I would like to open the song.  When I select this option I get nothing.  The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to.  I can't the songs to play however.  This is not true of all of my songs but it is true of quite a few of them.  Actually, one song is too many.    How do I get my music to play that seems to be locked up somewhere in the computer?

    Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

  • I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

    I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

    I just figured it out. All I had to do was close out of iTunes then restart.

  • Hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

    hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

    I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms  are appreciated.

    Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

  • After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

    After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
    VIBAC

    I downloaded and installed
    OS X Lion 10.7.5 Supplemental Update
    and that solved my problem completely. (368 AU plugins now works!)

Maybe you are looking for

  • 3rd gen iPod touch: takes forever to copy songs

    When I first got my 64 gb iPod, it took about two to three hours for is to copy over all the files. I was surprised at how fast it was, because my 32GB ipod touch took forever. In order to fix a problem I had with lyrics not syncing, I erased the iPo

  • Oracle 11g - Non Oracle JOB ?

    Oracle 11g - Non Oracle JOB ? ===================== I hope this is the right forum for this issue, if not let me, where to go. We are using Oracle 11g (11.2.0.1.0) on (Platform : solaris[tm] oe (64-bit)), Sql Developer 3.0.04 1) We are loading table

  • PO Approval Process

    Hi, We have a problem with the Workflow Nofitication page resolving with the host name of our server and it does not come up. I have some POs pending that need approved. Is there any other way a Purchasing Superuser can approve these POs/Releases tha

  • Applied archived log

    Hi, on 11g R2 dataguard, on Primary I have : SQL> select MAX(SEQUENCE#), THREAD# from gv$log where status='CURRENT' group by THREAD# order by THREAD# asc;   2    3 MAX(SEQUENCE#)    THREAD#         700602          1         259893          2        

  • Cannot access the iTunes music store.

    Is there a block on iTunes music store when you have a Polish address for your iTunes account? Since changing my address to a Polish one, I can no longer access the music store, only the software applications.