Error message KI203 when transferring non valuted stock cross company

Hi,
The posting of the stock transfers plant to plant is prevented by the error message
KI203: Company code & is not assigned to CO area &.
The Error is in following case :
1. The transfer posting is carried out between plants of different company codes.
2. The material in the issuing plant is non-valuated.
When valuated material there is no any error .
We are on 4.7 version ,
Also we know that on 4.6 version the system supported this process .
Please advise .
Best Regards,
Moshe

Hi
The best way to slolve this problem, Now is to maintain Assable value in Material Master For reciving Plant.
Hear you can maintain all the chapter id, register A or C, etc
and then try doing GR,
The other way and the permanent solution is
VPRS or equivalent
Condition class B Prices
Calculat.type C Quantity
Condit.category H
Cond.control H Condition value fixed
Condit.origin A Automatic pricing
In this Condition category is most important and by this only system copies the base amount for excise duty calculation in MIGO or J1IEX.
Regs
Niti Narayan

Similar Messages

I cannot transfer my Ical on my Imac with Mavericks 10.9.2 to my iphone 4 with the latest operating system. I get error message "403" when it attempts to upload to the cloud before transfering to the iphone. Any advice would be greatly appreciated.

I cannot transfer my Ical on my Imac with Mavericks 10.9.2 to my iphone 4 with the latest operating system. I get error message "403" when it attempts to upload to the cloud before transfering to the iphone. I've tried shutting down the computer and iphone but it has not been successful. There is plenty of data available on the icloud as I've not used it for anything else. Any advice would be greatly appreciated. Thank you.
Kevin

Hello kmcnern3,
Thank you for providing the details of the calendar issue you are experiencing with your iMac and iPhone. I recommend following the steps in the section titled "Troubleshooting on OS X" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT5655 Error message received when attempting to download Adobe Flash for Mac version 10.8.5. HELP!

Error message received when attemping to download Adobe Flash on MacBook Air using either Safari or Firefox.

Are you downloading directly from the Abobe site? Non-Adobe hosting sites may have corrupted or contaminated versions.
http://get.adobe.com/flashplayer/?promoid=KEWEI

TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version. What should I do?

I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version. What can I do?

Hey there davidgor2!
I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
and the specific part of the article you will want to look at first is right here:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for using the Apple Support Communities!
Regards,
Braden

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

Firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. What can I do?

After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
I have had this problem before and had to reinstall an earlier version of firefox.
The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

I am getting an error message -42110 when I try to download anything from Itunes on my new MacBook Pro

I am getting an error message -42110 when I try to download anything from Itunes Store on my new MacBook Pro.

Maybe a more appropriate place to post
iTunes
And if you want to discuss your MBP:
MacBook Pro

I am getting an error message -41 when I try to send my project to IDVD

I am getting and error message - 41 when i try to send my video project to IDVD. Does anyone know what i have to fix?

Hi
The Error -41 mFulErr Memory full (open) or file won't fit (load) - means that memory is full
Memory can be more than one thing
• RAM - usually is enough and rarely give this error
• Start-Up Hard disk - is TO FULL - very common origin to this signal
• Other hard disks - Usually do not have any thing to do to this
So first idea is - HOW Much free space is there on Your Start-Up (Mac OS) hard disk
My minimum is 25Gb free space and especially if iDVD is to be used.
This space is needed by iDVD and Mac OS temp. files and can not be addressed elswhere. Has to be here.
Secondly - I never in any version of iMovie use - Share to iDVD - BUT I - Share to Media Browser and as Large (not HD) this I import in iDVD and result are so much better.
Yours Bengt W

ITunes displays error message -69 when syncing iPhone

hi,
iTunes displays error message -69 when i sync my iPhone 3GS, this is just for syncing music to my iPhone. apps syncing is ok.
can anyone help please?
thanks

Follow the directions in this support article:
http://support.apple.com/kb/HT1210

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". I cannot now access iTunes. How can I resolve

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thanks

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Error message 9006 when trying to update os

getting error message 9006 when attemption to update os on ipad 2

To the original poster and Jennifer:
Although this step is not in the Apple document, I am pretty sure I found an easier way to fix 1601, 1602 and 1604 errors at my iPhone blog -- and that is to simply switch USB ports and try again -- also make sure you are not plugging in the iPhone via a hub and that it has full USB power.
I have no idea why the change of ports seems to work, but 49 out of 50 people who have tried it report success, so you've got nothing to lose.
Scott

Error message appears when trying to start server in VM Manager

Error message appears when trying to start server in VM Manager
OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
When trying to restart server:
OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

PC crashed. Attempted to install NEW copy of Elements 10 that I had in reserve. Always get ERROR MESSAGE 400 when trying to open the program. Please advise how I get around this error.

My PC crashed. I rebuilt it from scratch and tried to install my unopened copy of Elements 10. I get error message 400 when trying to open the program. Windows 8.1 64bit

if that's a network connection error, Sign in, activation, or connection errors | CC, CS6, CS5.5

I get an error message (-54) when trying to sync my iphone 6 plus wiht itunes, how do I correct this?

I get an error message (-54) when trying to sync my iPhone 6 plus with iTunes on a window based computer, how do I fix this?

I actually meant to post this link in my other post and now see I didn't.
http://docs.info.apple.com/article.html?artnum=304893
It may be of no use if you're up to date with software.
Google also throws up these.
http://www.google.com/search?client=safari&rls=en-us&q=ipoderror48&ie=UTF-8&oe=UTF-8

Loading the latest OS on my iPhone4 caused the phone to freeze. I get error message 4013 when trying to restore the phone. Any help will be appreciated

Loading the latest OS on my Iphone 4 caused the phone to freeze and stop working. I get error message 4013 when trying to restore the phone.

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

Error message KI203 when transferring non valuted stock cross company

Similar Messages

Maybe you are looking for