Error message:" labview 7.1 developmen​t system has encountune​red an error"

sir,
I had written program which had compiled earlier successfully, now i had improved the program for having some external diaplay by including sub vi 's consisting of DIO lines, the program when compiled now is shutting down abruptly giving a message " Labview 7.1 development system had encountered a problem and windows  is shutting it down" . I have checked the program again by removing that sub vi's of DIO lines and again its getting compiled. I will be very thankful if u could help me to solve this problem.
vamsi

Hello vamsi,
Thank you for posting to the NI Discussion
Forums.  LabVIEW will crash like this
only if Windows shuts it down.  This is
usually a result of some sort of corrupt external code call.  You mention including DIO DAQ, what device
are you using, and are you making DAQ driver calls in your program?  If the daq calls are removed and you still
get errors, check to see if you have any Call Library Node VIs in your program
that call external code (DLLs).  Use
highlight execution generously to see exactly where the program crashes, and
use that as a clue to help with the debugging. 
Also, consider posting a screenshot of your code that is crashing with
any additional information on the problem you think may be relevant.  I hope we can help once we get a little more
information-
Travis M
LabVIEW R&D
National Instruments

Similar Messages

  • Error message:" labview 7.1 development system has encountunered an error"

    sir,
    I had written program which had compiled earlier successfully, now i had improved the program for having some external diaplay by including sub vi 's consisting of DIO lines, the program when compiled now is shutting down abruptly giving a message " Labview 7.1 development system had encountered a problem and windows  is shutting it down" . I have checked the program again by removing that sub vi's of DIO lines and again its getting compiled. I will be very thankful if u could help me to solve this problem.
    vamsi

    This post is a duplicate. Please follow replies here.
    -thanks-
    Travis M
    LabVIEW R&D
    National Instruments

  • Labview 10.0.1 development system has stopped working

    I am getting this cryptic message when trying to build an EXE in windows 7. 
    It happens right at the end of the build process when the application builder message says "saving main.vi"  where "Main.vi" is the primary.
    It forces labVIEW to close.
    Anyone have any experience troubleshooting an error like this?
    Thanks -

    I am experiencing the same issue.  I am no longer able to build the Host exe (i.e. an exe under the My Computer target) for a certain project.  I am able to build the RT exe under 2 different cFP-2220 targets in the same project.  I am also able to build the Host exe in different, but very similar projects.  I can also build the exe from this exact same project on different computers that have the same installation of labview.  Creating a new project allowed me to build the host when only the host part was in the project - when I added the RT target, it failed.  Cleaning the old build and trying again (and again..) does not help.
    I was using LabVIEW 2011 SP1, but I just upgraded to the f2 patch (which did not help).  Here are the series of error messages I get:
    Step 1 try to build the exe, it gets almost to the end and then freezes up:
    Clicking degug gives:
    Debug...
    Ok...
    jeffneuner - did you ever find a solution?
    Does anyone have any other suggestions for debugging or getting this to work?
    I don't have any experience using the LabWindows/CVI debugger, maybe there is something I can do with this?
    Thanks!
    Lauren

  • Error 513, no message was created in Support Desk System

    After implementing QAS in sp's 15, when the user wants to create a message from QAS solution manager, get the following error "Because of error 513, no message was created in Support Desk System"
    has been revised rfc connections and have no problem because when the user is done with NetWeaver - works perfect basis.
    Nor is it because of permissions users have the same roles that were assigned in the other systems DEV and PRD, and when they have no problems sending messages.
    I have reviewed the table BCOS_CUST "and is fine. As in other systems.
    I am grateful if someone can help me.
    Regards

    Dear Leonor,
    This forum is related to Public Sector Funds Management (budget) issues.
    I believe the best for you is to open this thread in the Basis forum. There you will find the experts to help you.
    Best Regards,
    Vanessa.

  • A problem with the cooling system has been detected

    I bought a new computer not to long ago, I've had it for almost a month now. It runs fine, and I've had no problems until not too long ago. I was playing a game, and I got a random error message: "A problem with the cooling system has been detected. Please turn off the computer immdiately, and return it for service." I don't understand how or why this came up, and I don't have any money to return it for any type of repairs. After I got this message, I left my computer off for about an hour. All seems well so far. Any suggestions?

    What laptop do you have?
    - Peter

  • Error 513, no message was created in support desk system BCOS005

    Hi All,
    After completing the ITSM config on Solution Manager 7.1, I am stuck with the following error when creating message from any of the satellite system, or from SM itself.
    "Because of error 513, no message was created in support desk system"
    Message no. BCOS005
    Error logs from SLG1:
    "No message created from SAP message 00xxxxxx 000xxxxx 2013 due to missing IBase"
    Transaction: SOLMAN_INCIDENT_UPD
    Program:AI_CRM_IM_UPDATE_FROM_SAP
    I have already checked various threads and suggested notes including 1522809 / 1741109, but unable to fix the issue.
    RFC's between both the systems are working fine. The entry for BCOS_CUST on SM is maintained as
    OSS_MSG   W    NONE    CUST   6.2    1.0
    The number range for SLF1 is maintained as 01 in TCode DNO_CUST01
    I suspect this to be related to IBASE or Number range, but seem to have the correct values maintained as mentioned in above notes. Would appreciate your valuable inputs on this.
    Thanks,
    Varun

    Hi Vivek,
    Tried updating the parameter, but no luck
    "Because of error 513, no message was created in support desk system"
    Message no. BCOS005
    Should be something to do with BCOS, can't figure out though.
    Any further thoughts?
    Regards,
    Varun

  • Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified

    Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified.I
    I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone.  Anyone facing the same issue or can point me in the right direction?

    You may get better information on that error message by reposting in the iPhone forums:
    iPhone
    It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than  just "G4" will get you help faster.

  • Trying to download icloud control panel - only getting so far.  Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.  Your system has not been modified.  To retry these operations at ltr time, pls run again.

    First time on here... so not sure if doing correctly.
    I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok).  I only get so far - 2 times I've tried it.  Keep getting message:
    The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
    Your system has not been modified. To retry these operations at a later time, please run the installer again.
    huh?

    As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
    Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
    Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
    - Right click on "my computer"
    - Select the "Advanced" tab
    - Click on "Environment Variables"
    Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
    Or you may just go to a DOS Prompt and type the following commands:
    1 - %temp% and hit enter
    2 - %tmp% and hit enter
    to both of these commands you will get a reply such as:
    'c:\temp' is not recognized as an internal or external command, operable program or bath files.
    So by looking at the reply you can see that my temp folder is c:\temp
    The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
    I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
    IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
    Hope it helps.

  • I am unable to download i tunes. After seemingly installing and looking like it was going to run, I got an error message that process could not be completed due to "system has not been modified".  Help!

    I am unable to download itunes due to an error message that popped up after installing (or so I thought) was completed. It said it could not complete the process because "system has not been modified". What?

    OK, can anyone explain how am I supposed to deal with this reply from apple? (I used a report a problem of a song purchase to ask why I can no longer access USA content)
    Quote
    Dear Darren,
    Greetings from iTunes Store Support. My name is Subramani and I am happy to assist you today.
    I understand that you are unable to make the purchases from your iTunes store account. I know how important this is for you and I am glad to provide you with the necessary information.
    Darren, you are not authorized to obtain content from the United States iTunes Store. We are unable to provide further information regarding this situation. I apologize for any inconvenience this has caused.
    For more information on Apple's requirements for using the iTunes Store, please refer to the iTunes Store Terms and Conditions:
    http://www.apple.com/legal/itunes/us/terms.html
    Thank you for being a valued iTunes Store customer. Have a nice day!
    Unquote
    Nice day? W-T-F?? They cannot tell me why I can't access USA content with my USA based account?
    Anyone?
    Thanks
    Darren

  • I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

    I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
    Never had any issues before now... any ideas?

    Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
    You'll have to setup the program again.
    cheers
    rob

  • I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

    I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

    Hi Brizill,
    Please refer to the help document below to understand the technical specifications for the same:
    System requirements | Photoshop
    Regards,
    Sheena

  • NW ABAP - Error Message: Signal c00 received by operating system

    Hi,
    I have a problem starting the NSP instance. I have installed JAVA trial and then ABAP Trial.
    The SAP Management Console form the JAVA Installation recognizes the ABAP Installation and adds an Application Server entry.
    Starting the JAVA instance is no problem and obviously has to be done before starting ABAP.
    But when I start the ABAP instance named NSP I received the first time two error messages:
    - SAP-Basis System: Operating system call getservbyname_ failed (error no.   0  ) and
    - SAP-Basis System: Signal c00 received by operating system
    I got rid of the first one by prociding according to SAP Note Number: 39227:
    - I added the entry "sapmsNSP 3600/tcp " to my service file (%windir%/system32/drivers/etc/services)
    after that at least the process msg_server.exe started properly
    the disp+work.exe remains unstartable throwing still the second error message at me. Another message can be seen in the Syslog which is not marked as an error:
    "SAP-Basis System: > 3 possible network problems detected - check tracefile and adjus"
    Anybody an idea how I can get the ABAP instance running ( I hope I don't have to uninstall the JAVA instance )?
    Thanks for your help
    Torsten

    Hi,
    What's the instance numbers of your two SAP systems?
    If you first installed the Java system it's normally 00 and 01 for SCS and Java Instance. The ABAP system has to have an higher number (I always use a number +10 as the other instance e.g. 10 for the ABAP system to be on the save side).
    Seems your ABAP system now use the message Server of the J2EE Engine (sapmsNSP 3600/tcp) Check the profile of your ABAP system, there you will find the right entry for the message server to connect too.
    Hope this helps a little bit.
    Regards,
    Daniel

  • I keep getting an error message that asks me to contact system administrator

    when I try to reply to certain emails like Ebay I get an error message that says to contact my system administrator

    I responded to you here >  https://discussions.apple.com/message/22264383#22264383
    Please do not start duplicate topics. Thank you 

  • I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

    i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

    If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
    Check options.."Web Server: Configuration" within LabVIEW.
    LabVIEW Champion . Do more with less code and in less time .

  • Get error messages for those procedures in some system tables

    Hi expert,
    when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
    Many Thanks,

    >
    when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
    >
    No - there is no system log table.
    You need to create your own logging package and log table and modify your procedure code to call your own logging procedures to log into your own log table.
    The procedures in the log package would typically be defined with PRAGMA AUTONOMOUS_TRANSACTION so that the exceptions get logged even if your procedure performs a ROLLBACK.
    See AUTONOMOUS_TRANSACTION in the PL/SQL Language Reference
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/autotransaction_pragma.htm
    Here is an Oracle-Base article that shows how to use the pragma to perform logging.
    http://www.oracle-base.com/articles/misc/autonomous-transactions.php

Maybe you are looking for