Error message:" labview 7.1 development system has encountunered an error"

sir,
I had written program which had compiled earlier successfully, now i had improved the program for having some external diaplay by including sub vi 's consisting of DIO lines, the program when compiled now is shutting down abruptly giving a message " Labview 7.1 development system had encountered a problem and windows  is shutting it down" . I have checked the program again by removing that sub vi's of DIO lines and again its getting compiled. I will be very thankful if u could help me to solve this problem.
vamsi

This post is a duplicate. Please follow replies here.
-thanks-
Travis M
LabVIEW R&D
National Instruments

Similar Messages

  • LV 8.6 will Not Compile in LV 2010 - Labview 10.0 Development System Has Encountered a Problem and Needs to Close

    I submitted this support request to NI on 8/12/2010.
    When I compile my LV 8.6 app in LV2010 I get this error:
    "LabVIEW 10.0 Development System has encountered a problem and needs to close.  We are sorry for the inconvenience."
    I was told to do a "Mass Compile" of my LV 8.6 app in LV2010...this failed too.
    I was then told to go to each and every vi and "Mass Compile" individually...after about the 50th vi this got old quickly...and it still didn't compile.  I then sent NI tech support "my code".  The good news is my LV 8.6 app didn't compile with LV2010 @ NI.
    My LV 8.6 app compiles and runs great in LV 8.6.  I don't want to be left behind with the newer upgrades and I want to move to LV2010.  I have lots of LV8.6 code to maintain and I really don't have the time to debug all of my apps.
    I was told this will be looked @ in LV2010 SP1.
    One note...back up your LV8.6 data before you move to LV2010.  Once your LV8.6 code is compiled in LV2010 you will not be able to go back to LV8.6.
    I restored all of my LV8.6 code and I'm back working with LV8.6.
    It's a tough call, do I stay in LV8.6 and get left behind?
    Do I bite the bullet and try to debug this mess in LV2010?
    I was told the compiler is completely different in LV2010.  That's great, but one reason I have NI Maintenance Agreement is to keep updated with the latest software.  I can't afford to re-compile LV code every few years.  Like most people, maintaining my Apps with customer's revisions, and modifications is enough work.  I don't want more work!
    I was told LV2010 SP1 would likely appear in May or June of 2011.  I'd hate to break out my old Turbo Pascal apps again...but hey...they still work!  My NI maintenance agreement is due this month too, I guess I'll pay NI one more year, and see if they come up with a solution.  But if NI doesn't fix this LV8.6 compile in LV2010 problem...I don't see any value staying current with LV software.
    I found another Bug with LV2010...you are going to love this one!
    There is a new "LV Update Service".  Perfect!  I like updating my LV software when new patches are available.  When I click "update" the update spins over and over "Checking for New Version".  I have let it run ALL day with no results...just sits and spins over and over.
    OK, I know give NI a break!  Yes, LV2010 has a new compiler...and Yes, I will renew my NI maintenance agreement.  I just want NI to know failing to compile just one LV8.6 app in LV2010 is not a good idea for customer relations.
    Thanks,
    Doug

    For your update service problem
    Unable to Update Current Version of NI Update Service
    Why am I Unable to Update My Version of NI Update Service in Windows Vista or Windows 7?

  • LabVIEW 11.0 Development System has stopped working (happens every time I close manually)

    Perhaps this issue is related to my computer only?
    Does anyone else experience this when the manually close labview's "getting started" window?
    All I have to do is open labview then close the window... everytime.
    Here is the data dump from the crash alert window:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: LabVIEW.exe
    Application Version: 11.0.0.4029
    Application Timestamp: 4e0213b5
    Fault Module Name: RpcRtRemote.dll
    Fault Module Version: 6.1.7601.17514
    Fault Module Timestamp: 4ce7992f
    Exception Code: 80000003
    Exception Offset: 00006369
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    I'm using win7 x64
    Thanks
    -pat

    I have not seen that problem before.  But I would try to reinstall/repair LabVIEW via the control panel->programs and features.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Error message:" labview 7.1 developmen​t system has encountune​red an error"

    sir,
    I had written program which had compiled earlier successfully, now i had improved the program for having some external diaplay by including sub vi 's consisting of DIO lines, the program when compiled now is shutting down abruptly giving a message " Labview 7.1 development system had encountered a problem and windows  is shutting it down" . I have checked the program again by removing that sub vi's of DIO lines and again its getting compiled. I will be very thankful if u could help me to solve this problem.
    vamsi

    Hello vamsi,
    Thank you for posting to the NI Discussion
    Forums.  LabVIEW will crash like this
    only if Windows shuts it down.  This is
    usually a result of some sort of corrupt external code call.  You mention including DIO DAQ, what device
    are you using, and are you making DAQ driver calls in your program?  If the daq calls are removed and you still
    get errors, check to see if you have any Call Library Node VIs in your program
    that call external code (DLLs).  Use
    highlight execution generously to see exactly where the program crashes, and
    use that as a clue to help with the debugging. 
    Also, consider posting a screenshot of your code that is crashing with
    any additional information on the problem you think may be relevant.  I hope we can help once we get a little more
    information-
    Travis M
    LabVIEW R&D
    National Instruments

  • I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord?  Please help!!

    I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord?  Please help!!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Internet Download error message: the connection with the server has been reset

    With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b,  I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet.  My IP address would then be reset and download would be interrupted.  To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
    Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
    Hopes this helps.

    Hi!
    Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
    So, what can I do now?
    Thanx

  • How to create a standalone executable in LabVIEW 2009 Professional Development System?

    How to create a standalone executable in LabVIEW 2009 Professional Development System?
    Solved!
    Go to Solution.

    This should help you out http://zone.ni.com/devzone/cda/tut/p/id/3303
    Also remember that quick search with Google in many cases will be quicker than asking in this forum. I always use Google before I ask for help in any forum. It is much quicker
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • ITunes unable to recognize iPod, error message along the lines if "iTunes has detected an iPod but unable to recognise" I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this

    Hi,
    I am need of help! I have had this issue for a while now and it's becoming frustrating.
    My iTunes installed on my HP Windows 8 Netbook is unable to recognize my iPod, the error message along the lines of "iTunes has detected an iPod but unable to recognise"
    I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this??
    Someone please help me fix this problem.
    Many thanks.
    Matt.

    Hi
    So just close iTunes and re-open iTunes thats it and that worked for you?
    When you say reset your settings do you mean to factory settings? As my iPod was swapped at the store for a new one and the problem is still there...
    Thanks.

  • I've tried to open itunes but just get error message saying this version of itunes has not been correctly localized for this language. Please run the english version

    Looking for some help.  I am trying to open itunes and I keep getting an error message saying "This version of itunes  has not been correctly localized for this language. Please run the english version"
    Can anyone help.

    Hi there nisbetk,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W.

  • When starting InDesignCS2 received new error message -- InDesign is missing required system fonts or

    We are not able to start Indesign CS2 without getting the error message: <<InDesign is missing required system fonts or CMap files. Please reinstall InDesign.>> This is on WinXP.<br /><br />Recently I installed Creative Suite CS4. It took almost a day to install. The installation kept on stopping. Each time we were able to install one more program. After checking all of the programs we discovered that Firefox would not start due to a possible font error. After reading many posts I decided to uninstall a lot of fonts since I did not know which one was the culprit. <br /><br />However now I am missing a font (at least I hope that this is caused by a missing font and not anything else) that should be there and I don't know which one it should be. I did uninstall a <lot> of fonts and don't remember which ones.<br /><br />WE did uninstall all CS2 programs and then reinstalled only the necessary three. However that did not make any difference.<br /><br />Any ideas and suggestions would be welcome<br />Thanks<br />Pia Pehtla

    A forum search for "missing required fonts" brings up this thread which should solve your problem:
    http://www.adobeforums.com/webx?128@@.3bbdb0a7
    Peter

  • Cant get my Outlook contacts and mail set up without crashing...error message is "Apple Outlook DAV config has stopped working"

    When I check the box to add Mail, Contacts, etc to iCloud, it goes through the setup about half way and crashes on the contacts. Error message is:
    "Apple Outlook DAV Config has stopped working"  Any suggestions? I can't get this stuff set up!  Thank you

    Hello Washit,
    Sorry to hear that you are getting the error message "Apple Outlook DAV Config has stopped working." 
    I recommend following the steps in the section titled "Troubleshooting iCloud Contacts update or setup issues with Microsoft Windows (Microsoft Outlook)" in the following article:
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

    I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

    Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • SYSTEM ERROR: An accept of a new connection has failed: OS Error 4:

    hi,
    Iam using forte.Iam getting this error Can anyone help me out from this error..!!
    SYSTEM ERROR: An accept of a new connection has failed: OS Error 4:
    Interrupted system call
    Class: qqsp_RemoteAccessException
    Error #: [501, 236]
    Detected at: qqcm_ExternalConnection::AcceptConnections at 1
    Last TOOL statement: method EXEProtocolManager.Listen
    waiting for your valuable reply

    Hi Suresh
    Give more details abot your OS. Can you share the source in EXEProtocolManager.Listen method?
    GS
    Iam using forte.Iam getting this error Can anyone
    help me out from this error..!!
    SYSTEM ERROR: An accept of a new connection has
    failed: OS Error 4:
    Interrupted system call
    Class: qqsp_RemoteAccessException
    Error #: [501, 236]
    Detected at:
    qqcm_ExternalConnection::AcceptConnections at 1
    Last TOOL statement: method
    EXEProtocolManager.Listen
    waiting for your valuable reply

  • Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    This is a user to user forum.  Apple isn't here and won't answer you.  You need to contact Apple directly.  You can use the Contact button at the bottom of the screen.

  • Trying to install iTunes and get this error: "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"

    HELP!!!
    I am trying to install iTunes on my Windows 7 laptop and get this error:
    "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"
    Arghhhhh!! I've tried different browsers and various other things suggested on other posts to no avail  

    Ok people, I think I have found the solution !
    If you click on the start button from your desktop screen.
    Then in the "search programs and files" field type : apple software update - you can find the apple installer.
    Click on the apple software update line and let the machine run it's course. I recommend updating whatever it wants to , ie: safari 5, quicktime, itunes....
    I then restarted my computer and it seems to be working now !
    Good luck everyone !

Maybe you are looking for

  • ITunes 8 Visualizers Both Produce Less Than Spectacular Effects

    I have noticed that the ITunes 8 Visualizers running on my MacBook Pro 17" Core Duo with Mac OS X 10.5.4 both produce less than spectacular effects. Has anyone else noticed this problem? More than half of the 'Classic' Visualizer's effects look like

  • Problems with Suitcase 11

    I recently installed Suitcase 11 on a newly rebuilt Dell Workstation. Font management has gone smoothly so far. But a couple of my Arial fonts aren't working well in Illustrator and Photoshop. They all work well in MS Office apps. Most of the Arial f

  • Can't open PSD file after reinstall windows 7 64 bit

    After reinstalling windows 7 stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what the problem is. And how to fix it. Thank you.

  • How to update Safari on Snow Leopard IMac

    I have an IMac 10.6.8 Snow Leopard, 3.06 GHz Intel Core 2 Duo Have occasion to run Mail Chimp and it says Safari needs to be updated.  I've run my Software Update in the Apple Logo drop down box and it reports that all updates are already complete. 

  • Slight skip before many songs - if not all - anyone know why?

    When I am using Pod and press back - say to replay or restart a song - I often get a quick burst - maybe 1 second's worth, before the song starts. Has anyone else had this?