Error message libgdk-win32-2.0-0.dll

When I use:
"Copy photos as Digital Negative(DNG) and import" in LR 1,3 and attempt to open the file where they are saved on my HD,I receive error message.
"libgdk-win32-2.0-0.dll was not found"
I have downloaded a file "libgdk-win32-2.0-0.dll" (Google),but where do I install this file.
I have also reinstalled LR 1.3,but this was unsuccessful.
Rodger Buckley.

The one time this happened to me, it turned out it was the fault of a Windows update and doing a system restore back to the first state prior to that update fixed it.
From the number of times this crops up I suspect there are some other causes too--another thing I'd try is updated the drivers for the CD drive.
Bob

Similar Messages

ITunes failed to respond on my PC and gave me an error message to say a component - MSVCR80.dll - was missing. Never happened before and I have hundreds of tunes, playlists, Podcasts etc. in there somewhere. What is this about? Brian Forster

iTunes failed to respond on my PC and gave me an error message to say a component - MSVCR80.dll - was missing. Never happened before and I have hundreds of tunes, playlists, Podcasts etc. in there somewhere. What is this about? Brian Forster

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

I moved itunes file to external hard drive and want to move the file on my pc to recycle bin. When I move i get an error message that it cannot delete ituneshelper.dll access is denied. Can I move that file to the recycle bin?

I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.

Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2

System error message and application crash - ModName: lvrt.dll Offset: 00080a6a

I'm running into an error message which is proving particularly difficult to debug. After my built application has been running for some time, a windows system error will pop up telling me my application has done something bad and needs to be shut down (and sorry for the inconvenience). Clicking through to the "see what the error report contains" page reveals the issue as being in the lvrt.dll module at offset 0080a6a.
This unfortunately doesn't mean much to me.
On some occasions when I click "Don't Send", another error message pops up informing me there is "Not enough memory available to complete this operation".
The program will typically run between 8 and 24 hours before the error occurs, though I've had it run error-free for upwards of 48.
My program is unfortunately fairly large, and depends on communication with proprietary hardware so can't be uploaded in a functional state. In general terms, the body of the program (which is executing when the error occurs) involves RS-485 serial communication and simultaneous display of data to 7 continuously updating strip charts (producer-consumer design), along with envalope detection and RMS calculations in real time, all of which is multiplied by two parallel channels (around 1Mb/s data rate for each). The data is also buffered and stored in binary files for later review. Binary files are closed and a new one is opened for every 10 minutes of data collection (approx 50MB of data).
There are also about 40 user controls associated with each channel, and are polled periodically (a couple times a second). The crashes occur during over night tests, however, when there is no user input. Globals are used for inter-panel communication, but no global is written to in more than one location (most are read in multiple locations).
I know this is a bit of a shot in the dark here, but does the lvrt.dll error at offset 00080a6a mean anything to anyone? Are there any "typical" causes for a failure in lvrt.dll having to do with prolonged high data rate serial communications? For reference, this has occured on multiple machines, but all the machines it has occured on are identical out-of-the-box laptop models running XP 32. I'm going to try to run an overnight test tonight on the development machine and see if I get any different results (Vista 64 vs Windows XP 32).
I can't say my hopes are high with this one, and I'm gonna continue to comb over the code for any possible conflicts, but any insight would be appreciated.

Claire,
Next time the error message comes up I will take a screenshot of it for you. Unfortunately that may not be until Monday, as tonight is the soonest I'll be able to run another long-term test. The time between failures is the most frustrating part to debug!
There are no errors on compiling or building the application in LabVIEW. My testing has been done mostly on the distribution laptops in application form, with no LabVIEW dev tools installed, Windows XP 32 bit.
The overnight test I attempted on the development machine (within the LabVIEW environment) welcomed me the next morning with a rebooted machine, and so I wasn't able to see an error message (if there was one). Vista 64 on the development machine. Reviewing the data files, I got about 9 hours worth before the crash.
Given the time between failures and the large volume of data I'm passing around, this seems like memory leak type behavior. I'm a bit confused by the fact that it seems to fail in lvrt.dll every time, though. I'm don't know what that indicates, if anything.

HT1926 Installation of latest itunes update stopped, gave error message re couldn't find MSVCR80.dll. Suggested reinstall. Tried but that generated same message. Now get that message when I try to open itunes. I have Windows XP. Help!

Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll" Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!

Hey jeight26,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

Error message on Windows 2000 startup, "Tcmsvr.dll, File is missing"

We get the same error messages three times on Windows 2000 startup on some of our companys computers: "Tcmsvr.dll, File is missing". The computers are Tecra s1 models.
Which Toshiba driver is this related to?

I have checked the Toshiba driver page and it seems that the common modules for Tecra S1 are not available.
Anyway, the Tcmsvr.dll file could be also a part of Toshiba console. Its very difficult to detect it.
The Toshiba console is available on the driver page.
It's worth a try.

Error Message when opening Photoshop CS5: CoreFoundation.dll missing

Hello... and thank you for your help,
I downloaded my upgraded version of CS5 yesterday. I am running Windows 7.
I did not have a problem with the download or with accessing it. CS4 is still loaded on my computer.
Toady I started copying plugins and loading actions from CS4 to CS5. All of that went well too. I also tried to open CS4 while CS5 was open (and vice versa) to manually copy my Preference settings to CS5. When either was already open and I tried to open the other version, the other version merely reopened the version that was already opened.
At some point during this transitioning process, I opened up CS5 and received an error message that "The program can't start because the CoreFoundation.dll is missing from your computer..." I searched for this .dll file and found several entries, two of which are in CS4 and CS4 (64 bit).
How do I correct this? What happened? Also, do I need to keep my CS4 versions -- and are they causing the problem?
Thank you so much for your help,
Guy

Thanks so much, Chris.
The 64bit version of CS5 opens perfectly... and when I open this version first, then close it and open the 32 bit version (the one with the problem), the 32 bit version opens the first time without the error. The next time I open it, the error returns.
The 32 bit and 64 bit CS4 versions have these .dll files in them. Would copying one of these files to the CS5 version correct the problem? Should I uninstall and reinstall CS5 all together?
Thank you again.
Guy
PS Interesting that you mention iTunes. iTunes works fine except I haven't been able to open the iTunes store for two months... and Apple doesn't know why. (They stopped trying a month ago.) Also, one of their techs told me I can't delete Quicktime without damaging iTunes(?)

CRVS2010 Beta - Error message wrong path to access "crdb_adoplus.dll' file

Hi,
I just upgraded my VS2008 application to VS2010 and installed the latest "cr4vs2010" and "CRforNET40_x86" package but I'm having some problems.
When I compile my application I don't get any errors but as soon as I want to show a report I get the following error:
"Could not load file or assembly 'file:///C:\Program Files\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified."
On examination I can see is that I have a "dotnet" folder but not "dotnet1", as in the error message, and the "crdb_adoplus.dll' file does exist but in "...\SAP BusinessObjects Enterprise XI 4.0\win32_x86" folder and not as per the error message.
So my question is why is VS looking in the wrong place and what can I do to fix that?
Also, I used "Dependency Walker" utility to examine "...\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus.dll' file and it tells me that "MSVCR80.DLL" and "IESHIMS.DLL" files can't be found.
I'm a bit puzzled that correct path was not set as part of VS upgrade (of my application) so I would really appreciate some assistance.
Thanks,
Michael
Edited by: turbo56 on Aug 4, 2010 8:01 PM
Updated the subject line
Edited by: Don Williams on Aug 4, 2010 11:42 AM

Thanks Don for pointing me to the solution, i.e. adding the following to my app.config file solved the problem.
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
Edited by: turbo56 on Aug 5, 2010 11:51 PM

Get error message "GetLogicalProcessorInformation .... kernel32.dll" after applying firefox 36.0 update

i was using firefox 35.0.1 and just applied the 36.0 update few hours ago.
after that, i was unable to run firefox.
when i double clicks on the firefox icon, it bumps out 2 error message.
1 of them is "GetLogicalProcessorInformation ... kernel32.dll"
and the other is "unknown exceptional error (0xc06d007e) at 0x7c812a5b"
those are keywords from the message since i am using traditional ver. firefox, not sure if i translate correctly.
wonder if i can just return to 35.0.1 and wait until another update fix this problem

''jayelbe [[#answer-696612|said]]''
<blockquote>
Hi tenfive,
It sounds like something must have gone wrong during the update.
Could you please try downloading the latest Firefox installer from this page, and use it to reinstall Firefox?
https://www.mozilla.org/en-US/firefox/all/
Let us know if this solves the issue! If not, It is possible to download and install Firefox 35 - but there were some security issues fixed in Firefox 36, so it's always better to use the latest version.
</blockquote>
i have tried that several times but things keep the same
i am now using firefox 35, thanks for your help :)

HT1926 Re-downloaded iTunes, could not update, error message is APSDaemon.exe and MSVCR80.dll "Apple mobile device failed to start".... help?

That's the error message I'm getting. I keep troubleshooting my computer, and trying to troubleshoot iTunes and it's not working or coming up with anything.
I just used my iTunes yesterday and it was working fine, all I did was try to update it today and then this happened.
Now I can't even open iTunes...
Please help!

Click here and follow the instructions.
(99033)

HT1349 Not a Mac computer-have had ITunes on this computer for literally years. This morning i am getting an error message trying to open Itunes - MSVCR80.dll not found, Not installed correctly Error 7 (Windows error 126). DL would not work. Help!

Have had Itunes on this computer literally for years. This AM message "MSVCR80.dll not found, not installed correctly Error 7 (Windows error 126) "- and could not download (it wanted a mobile device - I don't have one)
Help!

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Error message: Bad Image: The application or DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.

I was in Firefox but I exited. Soon I opened it again, it
installed updates and this message showed up. I tried
scanning the file, looking at it, and everything short of
reinstalling Firefox (which every other person with this
problem has tried but it has not worked.). I installed
Firefox by USB drive, not a diskette, and I no longer have
it with me, so I can't check it from there. What should I
do to fix this problem?

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop. 
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. 
Don't remove personal data when uninstalling. 
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling. 
 
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
You may have a malware problem if you get unrelated pop-ups opening or are redirected to unrequested websites.
If that is the case then do a malware check with a few different programs.
Every program finds different malware, so you need to use more than one program to scan.
Do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

HT1349 My computer popped up with an update from iTunes several days ago. I downloaded the update and when I went to open iTunes, it won't open. I've tried to download again from the website, but it still gives me this error message. Missing MSVCR80.dll

My computer popped up with an update from iTunes several days ago. I downloaded the update. When I went to open iTunes on my computer, it gives me the following error messages...
Missing MSVCR80.dll file.
Error 7 (Windows error 126)
I tried to download iTunes again from the website and repair the problem, to no avail. I've tried several times, but cannot get it to open. I have a Windows 7 machine. My iPhone 5 and iPad work fine and have not asked me to update. I've never had a problem with iTunes before. I hate to delete it entirely from my computer and start over. I'm afraid I'll lose all the music I have downloaded there. What do I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error Message : Unable to load DLL (AddOnInstallAPI.dll)

Hi there..
I am lost in SBO Installation I have made an installation package for my add-on. When I want to deploy for my client, i get a very silly Microsoft .Net Framework error message, that is :
Unable to load DLL (AddOnInstallAPI.dll)
Here is my function to call the .dll file:
Private Sub Install()
Environment.CurrentDirectory = strDll
Dim sInstaller As String = installerPath
'installerPath is path for my Setup.exe file
Try
     'Run a new process
     System.Diagnostics.Process.Start(sInstaller)
Catch ex As Exception
     MsgBox(ex.Message)
     Windows.Forms.Application.Exit()
'Loop until windows found the executables
While System.IO.File.Exists("C:\Program Files\MyCompany\Statement of Account\SOA.exe") = False
End While
'After found the executables, then call SetAddOnFolder
SetAddOnFolder("C:\Program Files\MyCompany\Statement of Account")
   EndInstall() ' Inform SBO the installation ended
   Windows.Forms.Application.Exit() ' Exit the installer
End Sub
Does anybody ever face the same problem? My Client are using SBO2004 P9. I created all my addon using SDK P23. Is there any effect using different patches?
Just for your information, I try to uninstall everything, and re-install SBO2004A Patch 9 in my computer (same as my client) and it works fine!! Are there any other possibilities???
Hopefully, somebody can help me...
Thanks alot...

yes, i put the correct strDLL string as the parameter. I am able to run the AddOnInstaller with my PC (SBO 2004A Patch 26) and I also did the installer using my PC.
My Problem is that i can not to install in my customer PC which is using SBO2004A Patch 9.
Does anybody has some ideas about this issue?
Thanks for helping...

Error message libgdk-win32-2.0-0.dll

Similar Messages

Maybe you are looking for