Error message M3775 : Error in recursiveness check for special procuremen
Hi All,
I am trying to update the MMR for a material when I save the changes it gives an error message M3775 : ('Error in recursiveness check for special procurement type').
And also want to know why I am getting this error now, Why it doesnt gave any error at the time when the standerd procurment key was set to the plants.
Regards,
Abhishek
Hi Abhishek,
There are some similar customer messages with this issue occuring -
please see the below answers and check if relevant in your case
When a storage location is planned separately (SLoc MRP indicator '2'
in MRP4-view), it is automatically replenished by stock transfer from
the plant. You don't need to maintain the corresponding
Special Procurement Key in this case.
Only if you want the material to be procured in another way than stock
transfer from the plant, the Special Procurement Key
in the MRP4-view is necessary.
So you should be able to avoid the message just by keeping the
Special Procurement Key blank (as it is intended for stock transfer
from the plant).
Similar Messages
-
i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
the same thing happens in my ipad too.Thank you! I've been trying all day to get this to work! and finally i found the answer!
amensistech wrote:
I found a fix for this.
Go to Wifi Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
Set the DNS to 8.8.8.8 and then go back to the software update page.
This time it shall work.
I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
Do rate me and reply if it works. -
Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?
Try to force quit the mail app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works -
Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update
im having a similiar problem but my iphone 4s is stuck in the recovery mode.. like every time i restore the phone to factory setting it redownloads the firmware but nothing changes. any ideas?
-
My IPhone won't let me update software. Mess is- unable to check for update. An error occurred while checking for software update. What is wrong?
amm wait..first download the latest software (7.1.1) from the verified page..
then after the download completes.. back up ur device !
then after the back up completes.. turn off ur device
after that process jst hold down the home button for about 10 seconds and without leaving the button connect the usb cable to the pc. this process takes ur phone to the recovery mode!
now on the itunes press (shift ) and then click on update it opens some opener of the files now select the latest software that u've jst downloaded from the internet now there go.. -
So I bought a Powerbook G4 from a pawn shop and yes, I did check to see if it was still good. everything works fine but I need an update because I have OS X 10.3. So I connect to the internet and then I click on ''Software Update'' and I wait. But then a message opens saying ''An error occurred while checking for updates'' And I don't know why. HELP!!!
Something temporarily wrong with your internet connection?
Be aware that this is a very large file to download, it needs a strong consistent internet connection.
Have the iPhone on the charger cable too.
In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware). -
error message: Unable to check updates. an error accured while checking for a software update.
It is all in your WIFI.
I have 2 internal Wifi networks at home. In one (family) the software update works immediately, in the other one (guess) it gives me the same error "Unable to Check for Udpate" ... The guess network I did set up carries some restrictions being the reason why the update does not work. -
Wanted to. Update my ipad2 wirelessly,went to general,software update,then message appers:"unable to check for update an error occurred while checking for a software update." how do I fix that?
Try set DNS to 8.8.8.8 (do not change the other numbers)
http://i1224.photobucket.com/albums/ee374/Diavonex/53526605.jpg -
ORA-01423: error encountered while checking for extra rows in exact fetch
ERROR at line 1:
ORA-01423: error encountered while checking for extra rows in exact fetch
ORA-01722: invalid number
ORA-06512: at "Department.get_emp_name", line 57
ORA-06512: at line 14
Hi
The above are the error messages I am running into and I am not sure what it means at all. I do have a query which select few rows into cursor
cursor c_requested is
select * from departments where emp_id in (1, 2, 3)
now from these rows I again creating a query dynamically
open c_requested;
loop
fetch c_requested into deptID, name, authorized; -- declared variables
exit when c_requested%NotFound;
sqlstring := 'Select name from employees where deptID = ' || deptID || ' and Authorized = ' || authorized;
begin
execute immediate sqlstring into description; -- declared variable
exit;
exception when no_data_found then
description := 'FILTER_OUT';
end;
end loop;
close c_requested;
This code is inside a function get_emp_name(). When I execute this function I am getting the above errors. I really appreciate all your help. Please let me know if you need more information.
Thank you very muchThank you very much damorgan,
I looked through my code and figured out what was wrong. I had a varchar2 column in the table where I was passing a value 999 instead of '999'. Thanks again.
I have one more question. I am using cursor to loop through.. here is my code
rowcount integer;
cursor c_emp is
select * from employees where empID in (....);
begin
open c_emp;
rowcount := c_emp%RowCount;
loop
end loop;
dbms_output.put_line(rowcount);
end;
I am getting rowcount = 0 even though there are many values in it. I am not sure if I am using the where clause properly. Any help would be appreciated.
thank you. -
Error during availability check for order
Hi PM experts,
How can I make below warning message (W) to an error message (E)?
Message no: CO820 (Error during availability check for order)
Regards,
Nizam
PM ConsultantHi,
you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
Hope availability check rule is maintained on material master.
Hope it helps.
Regards,
N.Nagaraju -
FRM-40506: Oracle error: unable to check for record uniqueness
Hello everyone
I have an emergency problom. the context is:
I have a master -detail structure in a form. first, my detail is a tabulation view, so it has severals records. Then, when i try to commit the form ii received the message <<<FRM-40506: Oracle error: unable to check for record uniqueness>>.
i made a test by changing the detail block presentation to Form. and i could save because my detail has one record.
Could someone has any idea how can I save my master-detail form with severals records in my detail.
Master
[code_p] [non_P]
Detail
[code_p] [product1]
[code_p] [product2]
[code_p] product3]
[code_p] [productn]
thanks!Error Cause:
Processing error encountered while checking a record's primary key items for uniqueness. The table associated with the current block of the form does not exist, or you do not have authority to access the table.
You can review the error documentation:
http://www.errorpro.com/oracleerrors/oraerror.php?level1=Oracle&send=Send&ecode=FRM-40506&Submit=Search -
An error occurred while checking for a software update
I get this message "An error occurred while checking for a software update" and can not get my phone to update....any suggestions??
Did you figure out the problem? I'm stuck.
-
"software update" "An error occurred while checking for updates"
When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response. -
ERROR 801881e1 while checking for phone update
i get the following ERROR 801881e1 while checking for my phone update. I really want some solution. pls help if anyone knows about this. i really want the amber update.
Try this ..
Go to settings-->keyboard-->add keyboard and select any .. let it download to the phone ..
Now check for the update ...
If it goes thru' fine, you may remove the added keyboard by again going to settings-->keyboard and long press on the one you want to .. then select 'remove' .. -
Error as Attribute check for Asst, Govt & Parl Bus & PA to Dpty Chair fail
Hi,
I have created a new user and the user can not use the "SHOP" transaction in SRM portal. He is getting the error "Attribute for user XXXX contains errors. Inform system admin".
I have checked the org. stracture through PPOSA_BBP and find the error as "Attribute check for YYYY failed".
Could any body please suggest me what I need to do now?
where,
XXXX----name of the user
YYYY----Position of the user
Thanks,
PijushhI
users_gen
execute
now select
copy user and employee data from template
and
now
select radio button
create users from existion su01 users (since you have already created SU01 user in gui)
then execute
org id 5XXXXXXX - where do you want to assign the user ( this is org id from ppoma_bbp)
and selcect country of that org .(country must be mentioned in org 5XXX in the address tab)
and continur
and area of users
type your user id and execute
muthu
Maybe you are looking for
-
My iPhone 4 won't turn on unless I plug it in to a charger it says the battery is 100% and that I need to conect to iTunes when I plug it in to my computer it just comes up with a flashing apple logo :(
-
Passing object reference array to a method
Hi everyone, I'm new to the java programming language. I want to create create a array of 50 objects and pass them in to a method in other class. Can anyone help me on this problem........................ Chathu.
-
How do I render m2v from AE CC?
I'm looking at the list of render formats, and I can't seem to find Mpeg-2. I know it's possible to render m2v out of AE, I just can't seem to figure out HOW ... Thanks for any help.
-
Can't open you iphoto library with current version of Iphoto
I just got a new Imac and transferred my files from my G4 ibook but in doing so I seem to have modified my iphoto library on my ibook. Now I can't access any of the photos unless I upgrade iphoto. however I don't want to upgrade and was wondering if
-
Unable to convert string into binary
Hello, I have a web application that does the following: 1. Takes in user information via form. This includes images. 2. Displays all the user information in a portfolio. Looks like the portfolio on this page: http://wrapbootstrap.com/preview/WB00PN2