Error message:  .Mac account credentials validation failed for account...

I have published via iWeb for some time, but after I created a new webpage, I have been unable to publish again. This is the latest error message...
".Mac account credentials validation failed for account “account name."
I have tried publishing via wireless internet and direct connect to router, with the same results. The apple support site recommendation is to upgrade to iWeb 1.1.1 or higher, but I'm already running 1.1.2.
Thanks!
Craig

I have this same problem SUDDENLY. I never have had issues before.I have not tried to publish since 10/04 so I don't know when this started...? what is the answer. My .mac account is fine and working.

Similar Messages

  • .Mac account credentials validation failed for account

    hey guys-
    i just wrote a post to my blog and i tried to publish it, and a window comes up saying:
    Publish Error
    .Mac account credentials validation failed for account “breiser”.
    i've seen many other topics on this issue, but all of them say that it just immediately worked out. any help here?

    I'm having the same issue - different account name obviously. Please help!

  • .mac account credentials validation failed for account "myusername"

    just tried to upload a blog to one of my sites and i got this message
    .mac account credentials validation failed for account "myusername"
    any help on what to do?
    thanks, b

    just to let you all know for future reference..
    i shut down my computer, stared at the sunset out my window for a minute or 2, restarted the machine, tried to publish, and yippy!! now i have a new blog on my site, these computers are tricky sometimes!!
    b

  • .Mac account credentials validation failed for account "myaccount".

    I made some changes on my web site but when I tried publishing I got back this as a "Publish Error"--.Mac account credentials validation failed for account “dannpurvis”.
    How do I fix this?
    Thanks,
    Dann

    I had to do this four or five times - but it eventually worked!
    Thanks!
    One thing that I did was I went into my System Prefs
    and under the .Mac, I just deleted my account name
    and password in the fields, pressed enter which just
    refreshed the fields to make me enter my account &
    pass again. It went through verification process and
    accepted my password, logging me in again.
    Went back to iWeb and everything uploaded as normal.
    Hope this helps.
    Intel
    Macbook 2 GHz Intel Core 2 Duo   Mac OS X
    (10.4.9)   1 GB 667 MHz DDR2 SDRAM

  • .MAC account credentials validation failed

    I have never had trouble publishing before and now I get this error
    ".Mac account credentials validation failed for account ksporterproductions."
    I haven't changed anything - suggestions??
    iweb version 1.1.2 2006

    I have exactly the same problem when trying to publish with iWeb 06- .Mac account credentials validtion failed- or iWeb opens the .Mac pane from system preferences, I insert password & username, press return, it says password valid, and nothing happens. I return to iWeb, and publishing activity has stopped.
    This is clearly related to MobileMe switch.
    This is a total pain- get it sorted Apple, or at lest reply to tech support e-mails.
    Pixxed Off.
    Yours Beefybov

  • I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account "iCloud" failed." Been to Apple - no luck. Ideas?

    I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
    I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue. 
    I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
    I have tried the other solutions on here with no luck. HELP please.
    Many Thanks.

    Progress Update.
    I made a back of what existing phtos and Videos I had on my Iplhone.  I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
    Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted) 
    Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
    Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
    As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio.  The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
    I then went to bed as the restore is a long process.  When I woke up the library had library had cleaned itself up.  Mysteriously the prcess had deleted the files missing the their thumbnails.
    This is very perculiar and bad behavior.
    I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
    Here are the lessons learned.
    DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
    DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
    DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store.  (I did both :-(

  • Error Message F6804 Value Blank/Space invalid for account assignment elemen

    Dear Experts,
    We have a problem in Travel Management,
    I have created a trip for paid by company expenses only and entered cost distribution (fund, funds center and WBS) in the trip.
    When I transfer a trip to FI through transaction PRRW throughing error message "F6804 Value Blank/Space invalid for account assignment element for fund and FI313 No funds center entered/ derived in Item".
    The paid by com. expenses receipts of wage types credited with - positive amount in 2nd symbolic account offsetting entry and flagged W/CO also the symbolic code linked to linked  to Temprary clearing GL it is BS GL .
    I checked all the existing threads messages but I did not get solution.
    the problem comes up from our upgradation, 6 months back we upgraded to ECC 6.
    We don't have any problems in our old 4.7 system still it is working fine.
    I created OSS but still they did not solved and they are refering all passed notes.
    could any one give the solution to come out from this problem?
    Thanks and Regards,
    Satya

    Hi Satya,
    Basically the error is because of Funds Management which you have activated. Please check the note 1268001, 701291, 558295 & 936658 but i dont know will this be helpful or not.
    Regards,
    S.Srikanth
    Edited by: SrikanthS on Oct 26, 2010 11:17 AM

  • Hi Has anyone had this error message from iCal?  The request for account "Work" failed.  The server responded with "502" to operation CalDAVAccountRefreshQueueableOperation.

    I keep getting this message whenever i am connected to iCal which is a tad annoying.
    The request for account “Work” failed.
    The server responded with
    “502”
    to operation CalDAVAccountRefreshQueueableOperation.
    Please help!
    pippilaing (NZ)

    What I found works best is to do the following:
    Quit iCal on you
    Go to iCloud.com and sign-in
    Create an event on the calendar
    Sign-out of iCloud.com
    Relaunch iCal
    It will take a few seconds for the calender to resync, but you should see the new event pop up on the calender. After that, hopefully all is well.

  • Error message when trying to post GR for account assignment category A

    Hello gurus,
    when I create a PO item with account assignment category A, PO creation works fine. But when I try to post the GR for that item, I get an error message similar to
    "Account determination for entry <our chart of accounts> ANL <our company code> not possible".
    Any idea what the problem might be?
    I have had similar error messages in the past, when the automatic postings where not configured completely. So "ANL" should be some transaction like BSX or something. But I cannot find a transaction ANL.
    Thanks in advance
    Alicia

    Thanks for your help, everything seems to be ok as described.
    This seems to be a SAP error, see SAP note 1249431.
    Greetz
    Alicia

  • Catalog object privilege validation failed for user.

    Hi,
    I'm getting following error after adding the HTML tags in dashboard 11g.
    How to set the privileges?..Kindly let me know.Thank you.
    Error Massage:
    Catalog object privilege validation failed for user to path /users/User1/_portal/page 1.
    You do not currently have sufficient privileges to save a report or dashboard page that contains HTML markup. Dashboard contains custom HTML tags as part of static text.

    Hi User,
    Go to Settings -> Administrators -> Manage Privileges -> 'Answers'
    Here you can view - "Save Content with HTML Markup" next to it you will see 'Presentation Server Administrators'
    Click it and Change for 'Everyone'
    And, Save changes. Restart BI Services now you can add the contents and it will not popup any error messages.
    Thank you.
    Award Points and Close the Post as Answered to help others with same issue :)

  • BCS - Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'.

    Hello,
     I have create a an external content type .
     I Choose "Connect with user's Identity".
     I create a external list that uses the ExternalContentType.
     When I try open the external list from browser by User "TestUser" . I get the following error "Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'"
       My Question :
           I need to know why pass the credential "NT AUTHORITY\IUSR" to connect to the data base not the
            current log in"TestUser" ?  How Can I solve it ?
            Thanks
             Hema
    ASk

    Hi,
    did you configure Kerberos delegation?
    NTLM fails when you try to open external list from client computer, because SharePoint cannot pass user's identity - "Double Hop" issue.
    Take a look at confguring Kerberos for SharePoint 2010 white paper
    Download Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products from Official Microsoft Download Center
    http://www.microsoft.com/en-us/download/details.aspx?id=23176
    Robi MCT Kompas Xnet d.o.o. Ljubljana | blog: http://xblogs.kompas-xnet.si | website: http://www.kompas-xnet.si
    Slovenia
    Please vote if you find reply useful or mark it as answer.
    Thank you

  • Save validation failed for message

    Hi !
    I am trying to save a workflow to the database however I am getting an error saying 'Save validation failed for message 'WFTEST/COMPLAINT_REJECTED'
    underthis i got
    401: Could not find token 'NOTE' among message attributes
    401: Could not find token 'FORWARD_TO_USERNAME' among message attributes'
    What must I do to stop getting this error message.

    Hi,
    I've answered your duplicate post on the [WorkflowFAQ forum|http://smforum.workflowfaq.com/index.php?topic=998.0].
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • I have tried to upgrade Painter 11 on my iMac running OS X 10.5.8. I keep getting the error message :- : The following install step failed : run pre install script for Corel Painter11 _ SP1 . Contact the software manufacturer for assistance   " Help pleas

    I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
    I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
    Does anyone have any suggestions, please ?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Parts Requirement Create Order Error:Validation Failed for the field - Shipping Method DHL

    Trying to create Parts Requirement.
    Error message on clicking "Create Order" button: "Validation Failed for the field - Shipping Method DHL"
    Please suggest the Setup that needs to be done for this.

    Kinck
    The same script worked for me in vision (R12.1). You may have issues with your defaulting of a number of attributes that you are not passing in the API (like price list, line type and so on). You may want to check them.
    Thanks
    Nagamohan

  • I am using windows 8.when i am sign in an apple id. It shows an error message "apple id is valid but is not an icloud account"

    i am using windows 8.when i am sign in an apple id. It shows an error message "apple id is valid but is not an icloud account".

    You are getting this message because you are trying to create an iCloud account on a PC by signing with your Apple ID.  You can only sign into an existing account on a PC.  You first have to create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher.  After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

Maybe you are looking for